• 호남수학학술지
• /
• 제41권3호
• /
• pp.515-530
• /
• 2019

The concept of fuzzy sets in UP-algebras was first introduced by Somjanta et al. [Fuzzy sets in UP-algebras; 2016]. In this paper, we introduce and study fuzzy proper UP-filters of UP-algebras and prove their generalizations and characteristic fuzzy sets of proper UP-filters. Moreover, we discuss the relations between fuzzy proper UP-filters and their level subsets.

• 전기학회논문지
• /
• 제56권5호
• /
• pp.892-897
• /
• 2007

This paper presents the output filter design and the output characteristic analysis by cut-off frequency set up of the LCR filter on NPC multi-level inverter with trap-filter. The single-phase NPC three-level inverter operates at low switching frequency. The proposed LC trap filter is comprised of a conventional LCR output filter, by using LC trap filter the need for high damping resistor and low LC cut-off frequency is eliminated. Also. low damping resistor is increased the output filter system. The multilevel inverter system used NPC type inverter in proper system for high power application and controller is used DSP(TMS320C31). The effectiveness of proposed system confirmed the validity through SPICE simulation and experimental results.

• 한국물환경학회지
• /
• 제20권6호
• /
• pp.652-656
• /
• 2004

Both surface wash and backwash are considered as one of the most important methods that can improve the filtration efficiency in the existing water treatment plant. This study has mainly focused on the improvement of filtering efficiency by controlling surface wash and backwash time, and water level before backwash (when drained up to the trough, when drained up to 10 cm above filter bed, and when drained below 10 cm filter bed). Filtration efficiency was shown a little bit of differences depending on the operating conditions like surface wash injection pressure, the distance control between filter bed and the facility, and the types of surface wash. When the water level before backwash was reached up to 10 cm below filter bed after draining, however, the filtration velocity and the turbidity removal efficiency in the filter bed was improved. When the surface wash followed by backwash is longer, it showed a similar result. Because the proper adjustment of surface washing time makes filtration efficiency higher, therefore, it is necessary to set up the backwash time moderately.

• 상하수도학회지
• /
• 제14권3호
• /
• pp.260-270
• /
• 2000

The objective of this study is to evaluate the effect of filter aids in the dual-media rapid filtration. Paper-filter tests were conducted to determine the proper dosages of coagulant and filter aid, and pilot plant tests using two dual-media filter columns were performed for a variety of filtration rates. Using a filter aid (non-ionic polymer), the maximum feasible filtration rate is 480m/day, while turbidity is less than 0.3 NTU and filter run-time is about 70 hours. It is possible to increase the filtration rate up to 360 m/day for keeping the turbidity less than 0.1 NTU. Turbidity increases for the filtration rate greater than 360m/day. In general, the quality of filtered water with a filter aid is stable, while the filter maintains a sufficient filter run-time for a maximum allowable head loss. Particularly, the initial breakthrough can be effectively controlled. The use of a filter aid may be one of the methods applicable if the turbidity of filtered water is required to be improved or if the filter breakthrough limits filter run-time.

• Membrane and Water Treatment
• /
• 제11권4호
• /
• pp.247-255
• /
• 2020

Sand filter is a key unit process for particle removal in water purification treatments. Its long-standing use is due to on-site customized retrofit. Proper selection of filter media is one of the retrofit approaches to improve filter performance. This study described a series of controlled laboratory column tests and examined the effects of media property on filtration and backwash. When sand media of 0.51 mm in effective size was replaced by sand of 0.60 mm, the filter run increased up to 5 times in the given bed depth. The change of media property required an increase of backwash rate by 0.05 m/min to satisfy the requirement of bed expansion, more than 20%. When the anthracite was changed with lower effective size and uniformity coefficient, correlation with sand in the filter bed could be satisfied within the permissible error between media and bulk characteristics. Besides, this selection resulted in a well-stratified configuration of media layers after bed expansion. The column study showed that the correlation of property between the dual media had a significant effect on the filter productivity and backwash interval.

• 한국항공우주학회지
• /
• 제40권4호
• /
• pp.292-299
• /
• 2012

칼만 필터를 이용하여 RF 탐색기의 시선각 변화율 추정을 수행하였다. 김발형 탐색기의 모델링을 기반으로 칼만필터를 설계하였다. 필터 설계 시 주요한 인자인 공정 잡음 및 측정 잡음의 특성에 대해 살펴보았으며, RF 탐색기의 신호 특성에 맞는 측정 잡음치를 선정하여 필터링을 수행하였다. 측정 잡음관리를 위해 SNR 및 관련 신호를 이용하였으며, 공정 잡음에 따른 필터의 민감도 확인을 위해 대수적 방식을 사용하였다. 일식 등으로 탐색기 신호가 없는 경우 선형 해석을 통해 필터의 안정도를 분석하였다. 수치 시뮬레이션을 통해 제안된 시선각 변화율 추정기법의 타당성을 검토하였다.

• 제어로봇시스템학회논문지
• /
• 제3권3호
• /
• pp.238-243
• /
• 1997

A new transfer alignment algorithm using the velocity and the quaternion partial matching methods is proposed to reduce the effect of a ship's Y-axis flexure on the performance of azimuth error estimation of Kalman filter. The simulation results show that it can significantly reduce the effect of Y-axis flexure on error estimation by the transfer alignment algorithm. As its results, azimuth transfer alignment error is reached up to 3 mrad under proper roll and pitch attitude motion of the ship.

• Fibers and Polymers
• /
• 제2권3호
• /
• pp.164-170
• /
• 2001

Authors studied on the applicability of image analysis technique using a scanner with a CCD (charged coupled deviced) to the evaluation of evenness of nonwovens because it has distinctive features to considerably save time and labor in the analysis compared with other classical methods. As specimens fur the experiment, two different types that are unpatterned and patterned ones were prepared. For the unpatterned specimen, webs were chemically bonded, while for the patterned specimen, webs being thermally calendered with engraved roller. Several webs having various areal densities were prepared and bonded. Coefficient of variation (CV%) was used as a parameter to evaluate the evenness. Scanning conditions could be suitably set up through comparing the total variance to the between-group variance and to the within-group variance, respectively, on the images scanned at the different conditions. The 2D convolution method with smoothing filter kernel was introduced to further filter the noises on the scanned images. After the filtering process, the increase of web areal densities gave an uniform decrease of the CV%. This showed that the scanned image analysis with proper filtering process could be successfully applicable to the evaluation of evenness in nonwovens.

• 한국식물병리학회지
• /
• 제14권6호
• /
• pp.618-621
• /
• 1998

In pseudoperonospora humuli, the cause of hop downy mildew, environmental and host factors affecting laboratory production of oospore were examined. After 7 days incubation of leaf disk inoculated with sporangia on water, additional incubations were carried out under different conditions of temperature and moisture. Oospore production was also compared between very susceptible (Nugget) and resistant (Fuggle) hop cultivars. Oospores were not produced at 18$^{\circ}C$ regardless of other incubation conditions. Leaf disks failed to produce oospore when incubated on water for up to 18 days at 8$^{\circ}C$. No oospores formed on infection sites without necrosis. However, abundant oospores were produced at necrotized infection sites when inoculated leaf disk incubated on dry filter paper for 5 days at 8$^{\circ}C$. Both susceptible and resistant hop cultivars produced abundant oospores. In the measurement of optimal temperature for oospore production, oospores were produced at 6 to 12$^{\circ}C$ Most abundant oospores were produced at 8$^{\circ}C$. We suggest that proper combination of low temperature, dryness and necrosis may be a critical environmental factors for oospore production of P. humuli.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2067-2069
• /
• 1998

A prototype semiconductor switch for the command resonant charging system has been developed for a line type modulator, which charges parallel pulse forming network(PFN) up to voltage of 5 kV at repetition rates of 60 Hz. A phase controlled power supply provides charging of the 4.7 ${\mu}s$ filter capacitor bank to voltage up to 5 kV. A solid state module of series stack array of sixe matched SCRs(1.6 kV, 50 A) is used as a command charging switch to initiate the resonant charging cycle. Both resistive and RC snubber network are used across each stage of the switch assembly in order to ensure proper voltage division during both steady state and transient condition. A master trigger signal is generated to trigger circuits which are transmitted through pulse transformer to each of the 6 series switch stages. A pulse transformer is required for high voltage trigger or power isolation. This paper will discuss trigger method, protection scheme, circuit simulation, and test result.