• 신재생에너지
• /
• 제18권2호
• /
• pp.82-89
• /
• 2022

In this study, the exergy characteristics were analyzed, according to the mass flow rate of the propane working fluid and the pressure change in the turbine inlet, for the efficient recovery of cold energy and exhaust heat by the waste energy recovery system applied to the LNG FSRU regasification process. When the turbine inlet pressure and mass flow rate of the Primary Rankine Cycle were kept constant, the exergy efficiency and the net power increased. This occurred as the turbine inlet pressure and the mass flow rate of the working fluid increased in the Secondary Rankine Cycle, respectively, and the maximum values were confirmed. In this regard, the fluctuations in the exergy rate flowing into and out of the system and the exergy rate destroyed by pumps, evaporators, turbines, and LNG heat exchangers (condensers) were examined in detail.

• Korean Chemical Engineering Research
• /
• 제60권4호
• /
• pp.478-485
• /
• 2022

외부사업을 통해 발행받은 인증실적을 배출권 거래제 할당 대상 업체에게 판매하고 할당 대상업체는 구매한 외부사업 인증실적을 상쇄 배출권으로 바꾸어 할당량을 확보할 수 있다. 본 방법론은 기존 기름보일러를(유종별) 사용하던 화석연료를 상대적으로 탄소 함량이 적은 프로판가스를 사용하는 보일러로 교체하였을 때 유종별 이산화탄소 배출 감축분을 인정받아 온실가스 감축을 하지 못해 배출허용량을 넘긴 대기업의 부족된 할당량으로 보충하기 위한 초기 분석으로 탄소감축 배출량과 배출권 거래 금액을 산출하였다.

• 공업화학전망
• /
• 제23권6호
• /
• pp.25-36
• /
• 2020

용액공정을 통해 유기 전자소자를 대면적으로 제조하는 것은 다양한 장치 구성 요소(반도체, 절연체, 도체)의 패터닝 및 적층이 필요하기 때문에 매우 어려운 과제이다. 본 연구에서는 4개의 광 가교 기능기를 가지는 3차원 사면체 가교제인 (2,2-bis(((4-azido-2,3,5,6-tetrafluorobenzoyl)oxy)methyl)propane-1,3-diyl bis(4-azido-2,3,5,6-tetrafluorobenzoate) (4Bx)를 활용하여 용액공정을 기반으로 형성된 전자재료 박막을 고해상도로 패터닝 및 적층하는 기술을 개발하고, 이를 사용하여 고분자 박막 트랜지스터(PTFTs) 및 논리회로 어레이 제작을 진행하였다. 4Bx는 다양한 용액공정이 가능한 전자재료와 용매에 쉽게 혼합될 수 있으며, 자외선(UV)에 의해 가교제가 광 활성화되어 전자재료와 가교 결합을 형성할 수 있다. 4Bx는 기존의 2개의 광 가교 기능기를 갖는 가교제에 비해 높은 가교 효율로 인해 적은 양을 첨가하여도 완전하게 가교된 전자재료 박막을 형성할 수 있어 전자재료의 고유한 특성을 보존할 수 있다. 더욱이, 가교된 전자재료 박막은 화학적 내구성이 향상되어 고해상도 미세 패터닝을 할 수 있을 뿐만 아니라 용액공정을 통해 전자소자를 구성하는 전자재료의 적층이 가능하다. 4Bx의 광 가교 방법은 전용액공정을 통한 전자소자의 제작에 대한 혁신적인 방안을 제시한다.

• Archives of Pharmacal Research
• /
• 제25권6호
• /
• pp.946-953
• /
• 2002

Bisphenol A [2, 2 bis (4-hydoxyphenyl) propane; BPA] is a widely used endocrine disruptors and has estrogenic: activities. Although interests on biological effect of BPA are rising, evidences of its effect on immune system are lacking. We investigated that the effect of BPA on immune parameters to postulate the mechanism, and BPA interruptions between neuroendocrine and immune system. BPA was administrated to mice by p.o. (as a drinking water) dose on 0.015, 1.5 and 30 mg/ml for 4 weeks. The BPA treatment did not result in any change in body weight, spleen weight and distribution of lymphocyte subpopulation collected from spleen. BPA induced prolactin production in spleen, and exposure of SPA increased the activity of splenocyte proliferation in response to Con A (p<0.001). The production of a strong Th-1 type cytokine ($IFN-{\gamma}$) was induced while Th-2 type (IL-4) was suppressed by SPA treatment. These were consistent with RT-PCR results of transcription factor GATA-3 and IRF-1. These findings suggested that stimulation of prolactin production by estrogenic effects of SPA would affect cytokine profiles, and lead to imbalanced cellular immune response. In addition, we could speculate that prolactin and cytokine is important mediator involved in network between neuroendocrine and immune system by BPA.

• International Journal of Automotive Technology
• /
• 제4권1호
• /
• pp.9-19
• /
• 2003

Exhaust emissions were characterized for a fleet of 10 alternative-fuel vehicles (AFVx) including 5 compressed natural gas (CNG) vehicles. 3 liquefied petroleum gas (LPG) vehicles and 2 85% methanol/15% California Phase 2 gasoline (M85) vehicles. In addition to the standard regulated emissions and detailed speciation of organic gas compounds, Fourier Transform Infrared Spectroscopy (FTIR) was used to measure ammonia (NH$_3$) and nitrous oxide ($N_2$O) emissions. NH$_3$, emissions averaged 0.124 g/mi for the vehicle fleet with a range from <0.004 to 0.540 g/mi. $N_2$O emissions averaged 0.022 g/mi over the vehicle fleet with range from <0.002 to 0.077 g/mi. Modal emissions showed that both NH$_3$, and $N_2$O emissions began during catalyst light-off and continued as the catalyst reached its operating temperature. $N_2$O emissions primarily were formed during the initial stages of catalyst light-off. Detailed speciation measurements showed that the principal component of the fuel was also the primary organic gas species found in the exhaust. In particular, methane, propane and methanol composed on average 93%, 79%, and 75% of the organic gas emissions, respectively, for the CNG, LPG. and M85 vehicles.

• Fibers and Polymers
• /
• 제2권3호
• /
• pp.122-128
• /
• 2001

UV-curable polyurethane acrylate prepolymers were prepared from diisocyanates [isophorone diisocyanate (IPDI), 2,4-toluene diisocyanate (TDI), or 4,4'-dicyclohexylmethane diisocyanate (H$_{12}$MDI)], diols [ethylene glycol (EG), 1,4-butane diol (BD), or 1,6-hexane diol (HD)], polypropylene glycol as a polyol. UY-curable mixtures were formulated from the prepolymer (90 wt%), reactive diluent monomer trimethylol propane triacrylate (10 wt%). and photoinitiator 1-hydroxycy-clohexyl ketone (3 wt% based on prepolymer/diluent). The effects of different diisocyanates/low molecular weigh dial on the dynamic mechanical thermal properties and elastic recovery of UV-cured polyurethane acrylate films were examined. The tensile storage modulus increased a little in the order of EG > BD > HD at the same diisocyanate. Two loss modulus peaks for all samples are observed owing to the glads transition of softs segments ($T_gh$) and the glass transition temperature of hard segments ($T_gh$). For the same diisocyanate, $T_gh$, decreased, however, $T_gh$ increased, in the order of HD > BD > EG. The elastic recovery also increased in the order of HD > BD > EG at the same diisocyanate. In case of same diols, $T_gh$ increased in the order of $H_12$MDl > TDI > IPDI significantly. The ultimate elongation and elastic recovery increased in the order of TDI > IPDI > $H_12$MDl at the same diol.l.

• Toxicological Research
• /
• 제19권3호
• /
• pp.227-234
• /
• 2003

2-Bromopropane (2-BP), a halogenated propane analogue, is a substitute for chlorofluorocarbones (CFCs) which have a great potential to destroy the ozone layer and to warm the earth's environment. The present study was undertaken to evaluate the potential adverse effects of 2-BP on pregnant dams and embryo-fetal development after maternal exposure during the gestational days (GD) 6 through 17 in ICR mice. The test chemical was administered subcutaneously to pregnant mice at dose levels of 0, 313, 625 or 1,250 mg/kg/day. All dams were subjected to caesarean section on GD 18 and their fetuses were examined for external, visceral and skeletal abnormalities. In the 1,250 mg/kg group, maternal toxicity included an increase in the incidence of abnormal clinical signs and a decrease in the maternal body weight, body weight gain, and corrected body weight. Developmental toxicity included a decrease in the fetal body weight, a reduction in the placental weight, an increase in the fetal skeletal variation and ossification delay. There were no adverse effects on either pregnant dams or embryo-fetal development in the 313 and 625 mg/kg groups. These results suggest that a 12-day subcutaneous dose of 2-BP is embryotoxic at a maternally toxic dose (i.e., 1,250 mg/kg/day) in ICR mice. In the present experimental condition, the no-observed-adverse-effect level of 2-BP is considered to be 625 mg/kg/day for dams and embryo-fetuses, respectively.

• 대한화학회지
• /
• 제58권3호
• /
• pp.283-288
• /
• 2014

A column solid phase extraction procedure based on modified polyurethane foam (PUF) by a newly synthesized Schiff base ionophore, named 2,2'-{iminobis[propane-3,1-diylnitrilo(1E)prop-1-yl-1-ylidene]}diphenol, was developed for preconcentration step of trace amounts determination of copper ions in water samples by atomic absorption flame spectroscopy. The influence of parameters on the adsorption process such as sample pH, amount of modified PUF packed in the column, type and volume of stripping reagent and its flow rate were investigated and optimized. Under optimum experimental conditions, the calibration graph was linear in a relatively wide range ($0.005-210{\mu}g/ml$) with a limit of detection $0.002{\mu}g/ml$ of copper. The proposed method allows achieving to a concentration factor of >133. The capacity of a column (1.6 cm i.d.) packed by 6 g of PUF modified by 12 mg of the Schiff base was found to be $247.7({\pm}2.1){\mu}g$ of copper. It was found that the adsorption process was highly selective towards copper ions with respect to some associated metal ions. The presented procedure was successfully applied for determination of copper in some water samples.

• 치위생과학회지
• /
• 제8권3호
• /
• pp.109-115
• /
• 2008

치과용 가시광선 중합형 복합수지의 광중합효율을 높이기 위해 2종의 새로운 액체형 amine 개시제인 MA, MPT와 현재 가장 많이 사용되고 있는 개시제인 AEM을 CQ, PD, DA에 각각 첨가하고 UDMA의 광중합효율을 알아본 결과 다음과 같은 결론을 얻었다. 1. 조사시간이 증가됨에 따라 amine 개시제의 종류에 관계없이 광중합효율이 점차 증가되었으며, 약 60초까지 조사였을 때에는 광중합효율이 급격히 증가되었으나 그 이상 조사하여도 광중합효율이 크게 증가되지 않았다. 2. AEM, MA와 MPT를 사용하였을 경우 모두 CQ > PD > DA의 순으로 광중합효율이 우수하게 나타났으나 AEM을 사용하였을 때 PD와 CQ는 큰 차이를 보이지 않았다. 3. CQ의 광중합효율은 새로운 광개시제인 MA와 MPT를 사용하였을 때가 범용으로 사용되고 있는 amine 개시제인 AEM을 사용하였을 경우보다 중합효율이 증가하는 결과를 보였다. 4. PD의 광중합효율은 MA와 함께 사용하였을 경우가 가장 높게 나타났으나 AEM의 경우와 큰 차이를 보이지는 않았다. 5. 이상의 결과로부터 MA와 CQ 및 PD를 함께 사용한 새로운 광중합시스템이 광중합효율을 높이는데 효율적인 것을 알 수 있었다.

• 설비공학논문집
• /
• 제8권4호
• /
• pp.463-472
• /
• 1996

Experiments were carried out to study the operation characteristics of a regenerator with a thermo-syphon pump and a surface-flame burner for a lithium bromide (LiBr)-water absorption heat pump. A cylindrical-shape metal-fiber burner and commercial grade propane were used. The emission of carbon monoxide and nitric oxide was measured by a combustion gas analyzer. Ther regeneration rate of water vapor as a refrigerant was measured. It could be as a reference value showing the performance of the regenerator. The circulation rate of the LiBr-water solution was also measured from both the tanks for the weak-and the strong-solution. Using a refractometer, the LiBr concetration in the solution was calculated from the measured refractory index of the solution. Temperature of the solution and the condensed water was recorded at several points in the experimental apparatus with thermocouples, using a personal computer. This data collecting system for measuring temperature was calibrated with a set of standard thermometers. The generating rate of water vapor as refrigerant increased linearly with heat supplied. It was about 4.0g/s with the heat supplied at a rate of 16,500kcal/h. The circulation rate of LiBr solution also increases with the heat supplied. The difference in LiBr concentrations between the weak and the strong solution was in the range of 1 to 5% when the concentration of the strong solution was about 60%. It was dependent upon both the heat supplied and the circulation rate of the solution. The initial concentration and the level of the LiBr solution in the regenerator were measured and recorded before experiments. The effect of them on the generating rate of water vapor and the circulation rate of the solution was also studied. The generating rate of water vapor was not strongly dependent upon both the level of the LiBr solution and the initial LiBr concentration. However, the concentration difference of the solution increases with the initial level of the LiBr solution.