• Herbal Formula Science
• /
• v.7 no.1
• /
• pp.183-188
• /
• 1999

Though development of diverse and highly value-added commodities in Artemisia Iwayomogi, we can expect such effects as procurement of secure farm's production bases and promotion of consumer's demands. Thus, as a first step for development of funtional foods of Artemisia Iwayomogi, solids yield, physical properties and scopoletin contents which is main component of Artemisia Iwayomogi, were investigated according to extration solvents and temperatures. The main result of this experiment were as following: solid yield in 50% ethanol extracts showed higher than those of water extracts at the same temperature. In condition of 50% ethanol extracts, solid yield, degree of browing and scopoletin contents showed increasing, but turbidities which mean transmittance(%T) showed decreasing sa temperature rise. In water extracts, pH values showed increasing as temperature rise.

• International Journal of Advanced Culture Technology
• /
• v.3 no.2
• /
• pp.34-41
• /
• 2015

Bonding strength of a thermal sprayed coating is difficult to measure using a conventional pull-off test method. Scratch test is a potential alternative testing method. An adhesive and a cohesive bond strength of the coating can be measured by the pull-off test while the scratch test performed on the cross-section of the thermal sprayed coating can only demonstrate the cohesive bond strength of the coating. Nevertheless, it is still beneficial to perform the scratch testing on the cross-section of the coating for the sake of comparison thus providing an alternative to the pull-off test. The scratch test method can reduce testing time and cost in the long run due to a significant cost reduction in consumables and energy and time saving from the curing step of the glue used in the pull-off test. This research investigates the possibility of using the scratch test to measure the cohesive bond strength of Mo/NiCrBSi composite coating. The results from the pull-off test and the scratch test indicate that the cohesive bond strengths of the Mo composite coating show similar trend and that the cohesive bond strength are increased when increasing NiCrBSi content.

• Journal of Korean Academy of Nursing Administration
• /
• v.17 no.3
• /
• pp.301-314
• /
• 2011

Purpose: This study was a methodological research conducted to develop a clinical ladder system for operating nurses. Methods: Participants were 20 OR nurses, working in C Hospital, who had a mean tenure of 6 years and 10 months. Data collection consisted of 4 focus group interviews during May and June 2009. The content analysis method of Kim and Lee (1986) was used to analyze the data. Two clinical expert groups consisting of 16 nurses verified the content validity of the preliminary system from September 16 to 26, 2009 using Kim's tool (1999). Results: The final clinical ladder system consisted of goals, core values, and 4 domains of practice related to core values, which were defined as professional value, perioperative nursing practice, education/research, and collaboration/leadership. Eleven nursing competencies and 44 behavior indicators were included in accordance with the 4-step ladder. The 4 operation systems for the clinical ladder system were the promotion system, continuous learning system, reward system, and support system. Conclusion: The results indicate that nursing managers need to pay more attention to developing a clinical ladder system for nurses.

• Journal of Korean Public Health Nursing
• /
• v.30 no.3
• /
• pp.526-543
• /
• 2016

Purpose: The purpose of this study was to explore how public health nurses (PHNs) perceive their roles and duties (R&D), as well as to investigate the change of their R&D, how they manage and solve problems. Methods: The data were collected through focus group interviews. Data were analyzed using Morgan (1998) and Krueger (1998)'s four step analysis. A total of 17 experienced PHNs participated in this study. Results: The results found 5 themes and 19 sub-themes: R&D of health managers and health service providers, factors affecting the changes of PHN's R&D, R&D in adjusting with trends and expanding work field (R&D being reduced, increasing R&D, need to expand R&D), problem with the structure and quality of workforce (lack of nurse manpower, lack of promotion opportunities, increasing non-regular workers, lack of refinement as an expert), and strategies for solving personnel issues (strengthening the job capacity, cultivating professional refinement, strengthening outside activities and political activities, strengthening the roles of PHN-related associations and academy, engagement policy of non-regular workers, expansion of the activity area) Conclusion: PHNs need to recognize their changing R&D and ways they manage and solve problems to enhance their professionalism.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.3
• /
• pp.245-252
• /
• 2013

The purpose of this study was to analyze the effect that various loads have on the lower limb biomechanics. The following variables were measured and analyzed; performance time for each phase, lower limb moments and joint angles, and ground reaction forces. The kinematic and kinetic data was recorded by 2 force platforms and a motion capture system while 12 healthy adults in their twenties stepped down three steps under loads of 0%, 10%, 20% BW. Results are as follows. First, the different loading conditions did not seem to significantly affect the performance times and the joint angles. Second, the largest ground reaction forces were observed at the 1 step at the 10% BW condition. Finally, at the 0% BW loading condition the right hip extension moment was the smallest and the left hip flexion moment was the largest. The results show that there are not any significant changes in the biomechanics of the lower limbs under loading conditions up to 20% BW. Further investigations including more loading conditions with more weights and more additional steps analyzed are needed.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.3
• /
• pp.373-379
• /
• 2019

Nowadays, the IoT portable electronic devices have become more useful and diverse, so they require various supply voltage levels to operate. This paper presents a DC-DC buck converter with pulse width modulation (PWM) for portable electronic devices. The proposed step-down DC-DC converter consists of passive elements such as capacitors, inductors, and resistors and an integrated chip (IC) for signal control to reduce power consumption and improves ripple voltage with the resolution. The proposed DC-DC converter is simulated and analyzed in PSPICE circuit design platform, and implemented on the prototype PCB board with a Texas Instruments LM5165 IC. The proposed buck converter is showed 92.6% of peak efficiency including a load current range of 4-10 mA, 3.29 mV of the voltage ripple at 5 V output voltage for the supply voltage 12 V. Measured and Simulated power efficiency are made good agreement with each other.

• KDI Journal of Economic Policy
• /
• v.40 no.4
• /
• pp.23-45
• /
• 2018

The Korean government has provided various policy devices to boost technology transfers between academia and industry since the establishment of the Technology Transfer Promotion Act in 2000. Along with the enactment of the law, the Korean government mandated the establishment of a technology transfer office at national and public universities and encouraged technology transfer activities. Despite the quantitative expansion of technology transfer offices (TTOs), operational inefficiency was brought up. As a supplementary policy, the Korean government implemented a line of projects to support the labor and business expenses of leading TTOs. This research questions whether the project greatly affected the technical efficiency of TTOs. We analyze publicly available university panel data from 2007 to 2015 using a one-step stochastic frontier analysis. The results suggest that the program was marginally effective at shifting the technical efficiency distribution to the right on average, but it failed to maximize its impact by diversifying the policy means based on targets. The marginal effects of the program on technical efficiency differ according to the research capability and size of each school. We also compare technical efficiency against the licensing income at the start and end of the program. Technical efficiency increased for the leading TTOs, and both measures show improvements for unsupported TTOs. Our empirical results imply that diversifying the program for universities with different characteristics may have improved the effectiveness of the policy.

• International Journal of Advanced Culture Technology
• /
• v.7 no.1
• /
• pp.209-215
• /
• 2019

In order to provide a safe free-weight-training environment to people without workout trainers, we suggest a smart bench press machine with an automatic weight control system sensitive to user tiredness. Physical weight plates on the machine are replaced with a hydraulic cylinder as a press load and the cylinder knob is coupled with a step motor to change its tensile force automatically in-between lifting exercises. Three subjects participated to verify the usability of the smart bench press machine. They were asked to lift a 6-RM press load 10 times with 3 different lifting conditions: 1) no assistance, 2) a human assistance, and 3) the automatic weight control. All subjects were not able to complete the 10 sets without assistance due to tiredness, but they finished the full sets under the two assistive conditions. Average lifting speeds under the automatic weight control condition showed the most consistent level. Normalized quasi-tension data based on surface electromyogram signals of both Pectoralis Majors revealed that the subjects maintained the target muscle activation level above 50% but not more than 80% throughout the 10 sets. Therefore, the smart bench press machine is expected to both keep pace with the lifting exercise and reduce risk of injuries due to excessive muscle tensions.

• The Southeast Asian review
• /
• v.21 no.1
• /
• pp.287-314
• /
• 2011

There are many versions of the thai folktale "Pla Boo Thong" in Thailand, which is a typical type of stepmother story and in many ways resembles Cinderella story. This study, the author took 6 versions, some from books, some from internet. The main story of those 6 version is consist of the death of mother, stepmother and step sister, the maltreat of the stepmother to the heroine, tiding over the critical moments with the help of the dead mother and others, getting married with the king and happy of the heroine, death of the heroine by the slander of stepmother, posing as a queen of the stepsister, reincarnation of the dead heroine, meeting with the king again, and punishment and the stepmother and stepsister. The main theme of this narrative is a conflict in the polygamic family and is followed by the pattern of the Cinderella tale such as the distinct contrast of Good and Evil. This tale also teaches teachings of Buddha such as the punitive justice, the promotion of virtue and reproval of vice, and forgiveness. And otherwise it gives the people the courage and hope to overcome fortitude in their life.

• International Journal of Advanced Culture Technology
• /
• v.10 no.1
• /
• pp.160-169
• /
• 2022

This qualitative study aimed to investigate ways to improve effective cooperative learning from students' perspective by understanding and analyzing the learning experiences of nursing students who participated in a collaborative problem-solving learning model. Data were collected through focus group interviews and reflection journals of six second-year nursing students from G-university in J-city who participated in a collaborative problem-solving learning model course. The interview data were analyzed and divided into 3 categories and 10 subcategories according to the six-step thematic analysis method proposed by Braun and Clarke. The results of analyzing the interviews were considered based on three areas: preparation before learning, the process of collaborating as a cooperative learning experience, and solutions and expectations after learning. The participants felt frustrated because collaborative problem-solving took more time for individual learning than traditional methods did and would not allow them to check the correct answers immediately. However, they gained new experiences by solving problems and engaging in discussions within their learning community. The participants' expectations included material that could help their learning, measures to prevent free-riders, and consideration of the learning process in evaluation factors. Although this study has sample limitations by targeting nursing students in only one region, it can be used to help operate collaborative problem-solving classes, as it reflects the real experiences and opinions of students.