• 한국멀티미디어학회논문지
• /
• 제25권7호
• /
• pp.912-921
• /
• 2022

Autonomous vehicles equipped with cameras, such as robots, fork lifts, or cars, can be found frequently in industry sites or usual life. Those cameras show planar motion because the vehicles usually move on a plane. Sometimes the cameras in fork lifts moves vertically. The cameras under planar and vertical motion provides useful properties for horizontal or vertical lines that can be found easily and frequently in our daily life. In this paper, some useful back-projection properties are suggested, which can be applied to horizontal or vertical line images captured by a camera under planar and vertical motion. The line images are back-projected onto a virtual plane that is parallel to the planar motion plane and has the same orientation at the camera coordinate system regardless of camera motion. The back-projected lines on the virtual plane provide useful information for the world lines corresponding to the back-projected lines, such as line direction, angle between two horizontal lines, length ratio of two horizontal lines, and vertical line direction. Through experiments with simple plane polygons, we found that the back-projection properties were useful for estimating correctly the direction and the angle for horizontal and vertical lines.

• 한국CDE학회논문집
• /
• 제18권4호
• /
• pp.243-249
• /
• 2013

This paper presents a tool-path generation methods for an automated robotic system for skull drilling, which is performed to access to some neurosurgical interventions. The path controls of the robotic system are classified as move, probe, cut, and poke motions. The four motions are the basic motion elements of the tool-paths to make a hole on a skull. Probing, rough cutting and fine cutting paths are generated for skull drilling. For the rough cutting path circular paths are projected on the offset surfaces of the outer top and the inner bottom surfaces of the skull. The projected paths become the paths on the top and bottom layers of the rough cutting paths. The two projected paths are blended for the paths on the other layers. Syntax of the motion commands for a file format is also suggested for the tool-paths. Implementation and simulation results show that the possibility of the proposed methods.

• 정보처리학회논문지B
• /
• 제9B권1호
• /
• pp.99-104
• /
• 2002

기존의 물체추적기법은 템플릿 매칭, 물체의 경계선 재 검출, 물체의 움직임 정보 등을 사용하여 수행되었다. 그러나, 템플릿 매칭의 경우 많은 계산 시간을 요구하고, 경계선을 재 검출하는 경우 윤곽선이 잘못 설정되는 경우가 있으며, 물체의 움직임 정보를 사용하는 경우에는 움직이는 카메라에서 움직이는 물체만을 추적하기가 쉽지 않은 단점이 있다. 본 논문에서는 투영된 모션과 히스토그램 인터섹션을 이용한 강건한 물체추적 방법을 제안한다. 초기 객체추출은 영상분할 후 영역선택을 통하여 구성하고 선택된 객체를 가로 및 세로의 밝기 값을 1차원 신호로 투영하여 객체의 개략적인 평행이동 벡터를 추정한다. 추정된 변위를 기준으로 하여 객체의 가능한 회전 및 스케일에 대한 템플릿을 구성하고, 이들에 대하여 개선된 히스토그램 인터섹션을 사용하여 물체 추적을 수행한다. 제안한 알고리즘의 강건한 물체추적 성능을 실험에 의하여 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.597-600
• /
• 1999

In this paper, we propose a fast object-tracking algorithm in a moving picture. The proposed object-tracking algorithm is based on a projection scheme. More specifically, to alleviate the computational complexities of the previous motion estimation methods, we propose to use the projected row and column 1-D image data to extract the motion information. Experimental results show that the proposed method can detect the motion of an object fairly well with reduced computational time.

• 대한전자공학회논문지SP
• /
• 제44권5호
• /
• pp.35-44
• /
• 2007

넓은 시야각을 갖는 전방향(omnidirectional) 카메라 시스템은 적은 수의 영상으로도 주변 장면에 대해 많은 정보를 취득할 수 있는 장점으로 카메라 교정(calibration), 공간의 3차원 재구성(reconstruction) 등에 널리 응용되고 있다. 실 세계에 존재하는 직선 성분들은 전방향 카메라 모델에 의해 컨투어로 사영(projection)되기 때문에, 영상간에 대응되는 컨투어 성분은 카메라의 회전 및 이동 등의 추정에 효과적으로 활용될 수 있다. 본 논문에서는 전방향 카메라의 변환 파라미터를 추정하기 위한 2단계 최소화 알고리즘이 제안된다. 제안된 알고리즘은 컨투어를 이루는 대응점에 대한 에피폴라(epipolar) 평면과 3차원 벡터간의 각도 오차함수 및 사영된 컨투어의 거리 오차를 단계별로 최소화하는 카메라 파라미터를 계산한다. 등거리(equidistance) 사영된 합성영상과 어안렌즈(fisheye lens)로 취득한 실제 영상을 대상으로 제안된 알고리즘이 카메라의 위치 정보를 정확하게 추정함을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.631-634
• /
• 1999

In this work, a new algorithm for canceling MRI artifact in the image plane is presented. In the conventional approach, the motions in the X(readout) direction and Y(the phase encoding) direction are estimated simultaneously. However, the feature of each X and Y directional motion is different. First, we notice that the X directional motion corresponds to a shift of the X directional spectrum of the MRI signal, and the non zero area of the spectrum just corresponds to X axis projected area of the density function. So the motion is estimated by tracing the edges of the spectrum, and the X directional motion is canceled by shifting the spectrum in inverse direction. Next, the Y directional motion is canceled using a new constraint, with which the motion component and the true image component can be separated. This algorithm is shown to be effective by simulations.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1075-1078
• /
• 1999

In this study, a new algorithm for canceling MRI artifacts through the translational motion of image plane is presented. Bloating is often makes problems in a clinical diagnosis. Assuming that the head moves up and down due to breathing, rigid translational motions in only y(phase encoding axis) direction is treated. First, we notice that the x directional motion corresponds to a shift of the x directional spectrum of the MRI signal, and the non zero area of the spectrum just corresponds to x axis projected area of the density function. So the motion is estimated by tracing the edges of the spectrum, and the x directional motion is canceled by shifting the spectrum in inverse direction. Next, the y directional motion is canceled using a new constraint, with which the motion component and the true image component can be separated. Finally, the effectiveness of this algorithm is shown by using a phantom with simulated motions.

• 로봇학회논문지
• /
• 제1권2호
• /
• pp.180-187
• /
• 2006

This paper presents a new sensor system, CALOS, for motion estimation and 3D reconstruction. The 2D laser sensor provides accurate depth information of a plane, not the whole 3D structure. On the contrary, the CCD cameras provide the projected image of whole 3D scene, not the depth of the scene. To overcome the limitations, we combine these two types of sensors, the laser sensor and the CCD cameras. We develop a motion estimation scheme appropriate for this sensor system. In the proposed scheme, the motion between two frames is estimated by using three points among the scan data and their corresponding image points, and refined by non-linear optimization. We validate the accuracy of the proposed method by 3D reconstruction using real images. The results show that the proposed system can be a practical solution for motion estimation as well as for 3D reconstruction.

• 융합신호처리학회논문지
• /
• 제1권1호
• /
• pp.49-57
• /
• 2000

In this study, a new algorithm for canceling a MRI artifact due to the translational motion In the image plane is described. Unlike the conventional iterative phase retrieval algorithm, in which there is no guarantee for the convergence, a direct method for estimating the motion is presented. In previous approaches, the motions in the x(read out) direction and the y(phase encoding) direction were estimated simultaneously. However, the feature of x and y directional motions are different from each other. By analyzing their features, each x and y directional motion is canceled by the different algorithms in two steps. First, it is noticed that the x directional motion corresponds to a shift of the x directional spectrum of the MRI signal, and the non-zero area of the spectrum just corresponds to the projected area of the density function on the x axis. So the motion is estimated by tracing the edges between non-zero area and zero area of the spectrum, and the x directional motion is canceled by shifting the spectrum in an reverse direction. Next, the y directional motion is canceled by using a new constraint condition, with which the motion component and the true image component can be separated. This algorithm is shown to be effective by using a phantom image with simulated motion.

• 한국항공우주학회지
• /
• 제33권10호
• /
• pp.51-59
• /
• 2005

본 논문에서는 위성간 상대 궤도 운동과 최적화 기법에 근거한 다위성체 편대비행 형상 유지에 관한 연구 결과를 제시하였다. 편대를 이루는 위성간의 상대 운동은 궤도 압축 방법을 이용한 닫힌 형태의 궤도 전파기를 이용하여 분석하였고, 최적화 기법을 도입하여 편대 비행 형상을 유지하기 위한 각 위성의 궤도 기동 절차를 설계하였다. 예제로서 원형 편대 비행 제어 문제에 적용하였고 비선형 시뮬레이션 결과를 제시하였다.