• 제목/요약/키워드: projected area

검색결과 294건 처리시간 0.028초

산란 방사선이 치과용 방사선 필름에 미치는 영향에 관한 연구 (A STUDY ON THE SCATTER RADIATION AFFECTING THE DENTAL X-RAY FILM)

  • 박응천;김재덕
    • 치과방사선
    • /
    • 제22권1호
    • /
    • pp.87-94
    • /
    • 1992
  • The purpose of this study was to evaluate the effect of scatter radiation to dental x-ray film with long time-exposure in the different structures of the tooth, by using pinhole camera. For this study, pinhole camera, skull with tooth, and pocket dosimeter were used. The radiation with 70 and 90kVp and exposure time (minimum: 2.5 min., maximum 10 hrs.) was projected to the film in the pinhole camera. And density of the obtained x-ray film was measured with densitometer. In the intra-oral film taking, the amount of exposure of the scatter radiation affecting the thyroid gland area was measured with the dosimeter at the thyroid gland. The density of radiographs was compared in radiation projected with or without the metal cone of dental machine. The effect of the back scatter radiation to the film was also evaluated when the lead foil was removed. The obtained results were as follows: 1. A pinhole camera was a valuable device for locating the source of x-ray. 2. The scatter radiation affected the dental x-ray film when the radiation source was exposed. more than 5 hours'. In that case, the density of the scatter radiation could be observed visually. 3. The scatter radiation caused by short exposure of dental radiation didn't affect the diagnostic quality of the dental x-ray film. 4. The differences of densities between the tooth and the soft tissue according to exposure time showed 0.16 in 5 hours' exposure & 0.17 in 10 hours' exposure at 70 kVp & 0.12 in 5 hours' exposure & 0.13 in 10 hours' exposure at the 90kVp. 5. The differences of densities between the tooth and the soft tissue according to kVp showed no difference between 5 hours' exposure of tooth at 70 kVp and soft tissue at 90 kVp, but showed 0.05 high density in tooth when 10 hours' exposure at 90 kVp. 6. No difference of density was on radiographs taken with or without dental machine cone. 7. Back scatter radiation was recorded image of radiographs for only 3 min. 8. The amounts of the scatter radiation exposed to the thyroid gland in intraoral film taking were 1.12 mr in upper anterior, 0.55 mr in upper posterior, 2.75 mr in lower anterior, and 1.92 mr in lower posterior teeth.

  • PDF

A1B 시나리오 자료를 이용한 우리나라 아열대 기후구 전망 (Future Projections on Subtropical Climate Regions over South Korea Using SRES A1B Data)

  • 권영아;권원태;부경온;최영은
    • 대한지리학회지
    • /
    • 제42권3호
    • /
    • pp.355-367
    • /
    • 2007
  • 지구 온난화의 영향으로 임업 뿐 아니라 농업, 수산업, 보건 등 여러 분야에서 피해가 발생하고 있어, 사회 경제 전분야에 걸쳐 기후변화에 대한 적응 대책이 필요하다. 기후변화의 영향을 평가하고 적응 방안을 마련하기 위해서는 미래 기후가 어떻게 변할것인지 미리 전망하는 일은 필수적이다. 본 연구에서는 트레와다의 기후 지역 구분 기준(최한월 평균기온이 $18^{\circ}C$ 이하이면서 월평균기온 $10^{\circ}C$ 이상인 달이 8-12개월)을 적용하여 아열대 기후 지역을 정의하고 A1B 시나리오에 근거한 아열대 기후구의 변화를 전망하기 위하여 기온 관측 자료와 모델 시나리오자료를 분석하였다. 아열대 기후에 관한 트레와다의 정의를 적용하여 현재 아열대 기후구와 미래 아열대 기후구의 변화를 전망해 본 결과 현재는 제주도를 포함한 남해안 일부 지역(부산, 통영, 거제, 여수, 완도, 목포)에 해당하던 것이 2100년에는 태백산맥과 소백산맥을 중심으로 한 산지 주변을 제외하고는 대부분 아열대 기후에 포함된다. 즉, 현재의 온난화가 지속된다면 제주도와 울릉도를 포함한 도서지역은 물론, 동해안으로는 속초, 서해안으로는 강화에 이르기까지 해안 지역을 모두 포함하며, 서울, 인천, 수원 등 대도시 지역도 아열대 기후 지역에 포함될 것이다.

AquaCrop을 이용한 기후변화에 따른 미래 논벼 물발자국 변화 분석 (Analysis of Paddy Rice Water Footprint under Climate Change Using AquaCrop)

  • 오부영;이상현;최진용
    • 한국농공학회논문집
    • /
    • 제59권1호
    • /
    • pp.45-55
    • /
    • 2017
  • Climate change causes changes in rainfall patterns, temperature and drought frequency. Climate change impact influences on water management and crop production. It is critical issue in agricultural industry. Rice is a staple cereal crop in South Korea and Korea uses a ponding system for its paddy fields which requires a significant amount of water. In addition, water supply has inter-relationship with crop production which indicates water productivity. Therefore, it is important to assess overall impacts of climate change on water resource and crop production. A water footprint concept is an indicator which shows relationship between water use and crop yield. In addition, it generally composed of three components depending on water resources: green, blue, grey water. This study analyzed the change trend of water footprint of paddy rice under the climate change. The downscaled climate data from HadGEM3-RA based on RCP 8.5 scenario was applied as future periods (2020s, 2050s, 2080s), and historical climate data was set to base line (1990s). Depending on agro-climatic zones, Suwon and Jeonju were selected for study area. A yield of paddy rice was simulated by using FAO-AquaCrop 5.0, which is a water-driven crop model. Model was calibrated by adjusting parameters and was validated by Mann-Whitney U test statistically. The means of water footprint were projected increase by 55 % (2020s), 51 % (2050s) and 48 % (2080s), respectively, from the baseline value of $767m^2/ton$ in Suwon. In case of Jeonju, total water footprint was projected to increase by 46 % (2020s), 45 % (2050s), 12 % (2080s), respectively, from the baseline value of $765m^2/ton$. The results are expected to be useful for paddy water management and operation of water supply system and apply in establishing long-term policies for agricultural water resources.

항공사진과 항공레이저 데이터를 이용한 건물 자동추출 (Automatic Extraction of Buildings using Aerial Photo and Airborne LIDAR Data)

  • 조우석;이영진;좌윤석
    • 대한원격탐사학회지
    • /
    • 제19권4호
    • /
    • pp.307-317
    • /
    • 2003
  • 본 논문은 수동센서인 항공카메라와 능동센서인 레이저스캐너의 상호 보완적인 특징을 이용하여 지표면에 존재하는 다양한 지형지물 중 건물을 자동으로 추출하는 알고리즘에 대한 연구이다 제안하는 건물추출 알고리즘은 처리 단계별로 사용되는 데이터의 형태에 따라 point level process, polygon level process, parameter space level process의 세 단계로 나눌 수 있다. 첫 번째 단계인 point level process에서는 LIDAR의 점 데이터에서 과대오차를 제거하고 건물후보점들을 추출하여 같은 특성을 갖는 점들을 모아 폴리곤을 제작한다 두 번째 단계에서는 면적조건과 circularity를 이용하여 수목 폴리곤을 제거하고, 건물 폴리곤 사이의 포함관계를 정립한다. 마지막 단계에서는 이전 단계의 최종 건물 폴리곤을 공선조건식을 이용하여 항공사진 위에 투영하고 모폴로지 필터링을 통해 탐색영역을 제한한 후, Hough 변환의 파라미터 공간에서 다양한 가정과 제약조건을 이용하여 건물의 외곽선을 추출한다. 제안된 알고리즘에 의해 자동으로 추출된 건물 외곽선의 정확도를 검증하기 위하여 건물 모서리점의 3차원 좌표를 결정하였고, 이를 수치사진측량시스템에서 관측한 결과와 비교하였다. 실험결과 각 건물 모서리점의 평균제곱근오차는 X, Y, Z 각 방향으로 $\pm$8.1cm, $\pm$24.7cm, $\pm$35.9cm로 나타났다.

기후변화 시나리오에 근거한 과수 개화기 변화 및 개화 후 저온 발생 전망 (An Outlook of Changes in the Flowering Dates and Low Temperature after Flowering under the RCP8.5 Projected Climate Condition)

  • 김대준;김진희
    • 한국농림기상학회지
    • /
    • 제20권4호
    • /
    • pp.313-320
    • /
    • 2018
  • 2018년 봄, 갑작스러운 이상저온으로 인해, 전북, 경기 남부지역 등을 중심으로 개화된 과수 작목의 꽃이 얼어 죽는 일이 발생하였다. 2000년대 들어서면서 전 세계적으로 빈번하게 발생하고 있는 이상기후 현상으로 인해, 사회 여러 분야에 경제적인 피해와 악영향이 증가 하고 있다. 최근의 기후변화는 지구온난화와 더불어, 지역 기후의 정상 범위로부터 벗어나는 기상이변의 발생빈도 또한 증가할 것으로 예상된다. 기후변화가 농작물 생산에 미치는 영향을 파악하기 위해서는 이러한 이상기상 현상을 정확하게 파악하고 이에 따른 농작물의 영향을 분석할 필요가 있다. 본 연구에서는 배, 복숭아, 사과 작물이 실제 재배되고 있는 국내 주산 지역에 대하여 기후변화 시나리오를 이용하여, 미래 개화일의 변화를 각각 예측하고, 개화 후 온도 분포를 정량화함으로써, 미래의 저온 발생 추세를 전망하였다. 그 결과 온난화로 인해 개화기는 현재 재배중인 지역을 대상으로 모든 과종에 대하여 현재 평년을 기준으로, 미래 평년(2071-2100)에는 약 20일 정도 앞당겨 질 것으로 예상되었으며, 개화 후 저온의 분포는 과종, 지역 별로 일정 부분 차이가 있음을 확인할 수 있었다. 본 연구는 일부 과수 작목 및 품종에 한해 진행된 연구결과를 제시한 것으로, 차후 다양한 품종 및 작목으로 연구를 확대한다면, 미래 농업부문 대책 마련에 기여할 수 있을 것으로 기대된다.

우리형 그물의 유속에 따른 변형 및 적정 침자량 (Deformation of Cage Nets against Flow Velocity and Optimal Design Weight of Sinker)

  • 김태호;김재오;김대안
    • 수산해양기술연구
    • /
    • 제37권1호
    • /
    • pp.45-51
    • /
    • 2001
  • 그물의 S$_{n}$S값이 서로 다른 2가지의 상자 구조의 우리형 그물을 1/10로 축소한 모형에 대해 실물 그물의 면적 1$m^2$당 각각 0.1, 0.3, 0.5 및 0.7kg에 상당하는 침자를 그물의 각 모서리에 1개씩 총 4개를 부착하여 회류 수조에서 유속의 변화에 대한 그물의 변형을 측정하고, 이를 통해 조류에 의한 우리형 그물의 형상 유지에 효과적인 침자의 적정량에 대하여 검토하였다. 실험에서 얻어진 결과를 요약하면 다음과 같다. 1. 유속이 증가함에 따라 그물이 날림으로써 그것의 용적은 급격히 감소하였으나, 변형 각도 의 변화량은 증가하였다. 2. 그물의 S$_{n}$S값은 유속이 0.4m/s이하일 때는 그물의 변형에 약간의 영향을 끼쳤지만 유속이 0.5m/s 이상일 때는 별다른 영향을 끼치지 않았다. 3. 그물의 변형은 유속, 침자의 무게 및 S$_{n}$S값에 의해 결정되었다. 4. 그물의 용적을 50% 이상으로 유지하기 위한 침자의 총무게는 유속이 0.3~0.6 m/s일 때 31~245kg이고, 침자의 적정량은 그물의 면적 1$m^2$당 0.5kg 정도로 나타났다.

  • PDF

오염총량관리제의 시공간적 미래 토지이용 변화분석을 위한 CLUE-S 모델의 적용 및 평가 (Evaluation and Application of CLUE-S Model for Spatio-Temporal Analysis of Future Land use Change in Total Water Pollution Load Management System)

  • 류지철;안기홍;한미덕;황하선;최재완;김용석;임경재
    • 한국물환경학회지
    • /
    • 제30권4호
    • /
    • pp.418-428
    • /
    • 2014
  • The purpose of this study is to predict the spatio-temporal changes in land uses and to evaluate land-based pollutant loads in the future under Total Water Pollution Load Management System using CLUE-S model. For these ends, sensitive parameters of conversion elasticities in CLUE-S model were calibrated and these calibrated parameters of conversion elasticities, level II land cover map of year 2009, and 7 driving factors of land use changes were used in predicting future land uses in 2002 with two scenarios(Scenario 1: non area restriction, Scenario 2: area restriction). This projected land use map of 2020 was used to estimate land-based pollutant loads. It was expected that urban areas will increase in 2020 from both scenarios 1 and 2. In Scenario 1, urban areas are expected to increase within greenbelt areas and deforest would be expected. Under Scenario 2, these phenomena were not expected. Also the results of estimation of BOD and TP pollutant loads, the BOD difference between scenarios 1 and 2 was 719 kg/day in urban areas and TP difference was 17.60 kg/day in urban areas. As shown in this study, it was found that the CLUE-S model can be useful in future pollutant load estimations because of its capability of projecting future land uses considering various socio-economic driving factors and area-restriction factors, compared with conventionally used land use prediction model.

컴퓨터시뮬레이션을 이용한 항만설계 및 부산항 3단계 개발 계획에 관한 응용에 관한 연구 (A Study on the Microcomputer Aided Port Design Simulation and its Application to the Third State Busan Port Development Project.)

  • 김환수
    • 한국항해학회지
    • /
    • 제15권1호
    • /
    • pp.12-47
    • /
    • 1991
  • 본 논문은 마이크로 컴퓨터를 이용한 항만설계 시물레이션에 대한 계념을 소개하고 시물레이션의 핵심인 선박의 수학 모델에 대해 해석 및 분석을 하였다. 그리고 항만설계 시물레이션 기법을 부산항 3단계 개발 계획에 직접 응용하여 본게획과 관련한 설계상의 문제점 유무, 그리고 개발이 예정대로 완료된후 입출항할 대형 컨테이너선의 조선과 관련된 문제점 등에 대해 감정을 하였다. 먼저, 신설되는 컨테이너 터미널 전방의 turning basin의 크기에 대해 검정하고 동시에 선박의 이접안에 대해 그 안전성을 확인하였다. 동시에 새로 건설되는 부산 외항의 방파제를 통한 선박의 입출항과 관련한 안전성 문제도 검정하였다. 시물레이션에는 전장 290m 총톤수 60,000톤의 panamax size의 풀 컨테이너선을 이용하였다. 시물레이션은 전직 카디프항 도선사와 유경험 항해사에 의해 직접 실시되었으며 총 116회의 시물레이션 중 68회의 시물레이션이 실제 문제의 분석에 이용되었다.

  • PDF

국가기준점 망조정에 관한 연구 - EDM 관측지역 (The Korean Geodetic Network Adjustments for EDM Area)

  • 양효진;최윤수;권재현;김동영
    • 한국측량학회지
    • /
    • 제25권5호
    • /
    • pp.393-398
    • /
    • 2007
  • 국가 기준측지계가 세계측지계로 변경됨에 따라 모든 국가기준점의 좌표를 기존의 동경측지계에서 세계측지계로 변환해야 한다. 본 연구에서는 우리나라 삼각점자료 중에서 현재까지 남아있는 EDM 단일 관측지역의 세계측지계 좌표를 산정하였다. 이전의 정밀 2차 데이터 셋을 확보하여 이설자료를 조사 및 검증하여 데이터 셋에 갱신하고, 새로운 데이터 셋을 구축하였다. 구축된 데이터 셋을 국토지리정보원에서 고시한 변환파라미터를 이용하여 KGD2002 좌표계로 변환하였으며, EGM96 모델을 이용하여 지오이드고를 산정하고, 이전에 보정하지 않았던 지오이드고에 대한 영향을 분석하여 보정하였다 보정된 자료를 데이터 셋에 반영하고, GPS 2등 및 GPS망과 EDM망의 경계부분의 GPS 3등 기준점을 확보하여 경위도(BL) 망조정을 수행하여 최종 성과를 산출하였다. 최종 망조정 결과 표준편차(Mo)가 최소 1.37", 최대 2.13"로 나타났으며, 본 연구를 통하여 산출된 성과는 국가기준점성과로 사용 가능할 것으로 판단된다.

공문적 분업과 지방 노동시장의 특성에 관한 연구 -구미공업단지 섬유.전기전자산업을 중심으로- (Spatial Division of Labor in Korea and The Characteristics of Kumi Local Labor Market)

  • 박원석
    • 지역연구
    • /
    • 제6권1호
    • /
    • pp.11-38
    • /
    • 1990
  • The purpose of this thesis is, first to present the spatial division of labor in Korea and its mechanism, and second, to elucidate the organic integral relation between local labor market and local community by studing the mechanism that the spatial division of labor is projected into the individual lacal labor marker, and reproduction of labor force process in this local labor market. According to this purpose, the theoretical frame of this analysis is done, the positive analysis is made and Kumi is choosed as its analysis case area. The main data is from 'Survey Report on Manufacturing Idustry Wage Conditions' published by Minimum Wage Council, Ministry of Labour and from the questionnaires and interview on textile industry and electric electronics industry firms in Kumi Export Industrial Estate. The following are the results of this study. 1. The mechanism of spatial division of labor in Korea, seen through the employment structure index, is accelerating the regional discrimination by fixing the regional hierarchisation between Seoul (or Seoul Metropolitan Area as expanded Seoul) and other areas. But it is also developing highly the regional employment structure at the level of technical division of labor, since the spatial division of labor in Korea is leaded by large firms and influenced by the policy for regional development. 2. Local labor market is formed in Kumi area and its delimitation is Kumi city. The employment structure of Kumi local labor market is occupying lower hierarchy division at management hierachical level and occupying upper hierarchy division at the level of technical division of labor, and brand plants of large firs are determinating and dominating this emplogment structure. These bdranch plants of large firs are forming more favorable and stabel labor marker than locally controlled ploants in Kumi local labor market. But the reproduction of labor force process in Kumi local labor market is not fully carried out and leaked into central city, therefore Kumi is now becoming an unstable local community, suffering from large movement of population. This is because Kumi local labor market is found not for itself, but by the state policy and externally controlled plants of large firms, and therefore no potentiality to control and to absorb the exterior influences is built in Kumi local labor market. 3. The case firms A, B have spatial division of labor between decision-making function and production function, and between upper management hierachical labor force and lower management hierachical labor force in internal labor market.

  • PDF