• 대기
• /
• 제16권3호
• /
• pp.235-246
• /
• 2006

Remote sensing techniques using satellites or the scanning weather radars depend mostly on the presence of clouds or precipitation, and leave the extensive regions of clear air unobserved. But wind profilers provide the most direct measurements of mesoscale vertical air motion in the troposphere, even in the context of heavy precipitation. In this paper, the precipitation events during the Changma period was classified into 4 precipitation types - stratiform, mixed stratiform/ convective, deep convective, and shallow convective. The parameters for the classification of analysis are the vertical structure of reflectivity, Doppler velocity, and spectral width measured with the wind profiler at Haenam for a three-year period (2003-2005). In addition, the synoptic fields and total amount of precipitation were analyzed using the Global Final Analyses (FNL) data and the Global Precipitation Climatology Project (GPCP) data. During the Changma period, the results show that the stratiform type was dominant under the moist-neutral atmosphere in 2003, whereas the deep convective type was under the moist unstable condition in 2004. The stratiform type was no less popular than the deep convective type among four seasons because the moist neutral layer was formed by the convergence between the upper-level jet and the low-level jet, and by the moisture transport along the western rim of the North Pacific subtropical anticyclone.

• 한국분말재료학회지
• /
• 제18권5호
• /
• pp.406-410
• /
• 2011

Green strength is an important property of powders since high green strength guarantees easy and safe handling before sintering. The green strength of a powder compact is related to mainly mechanical and surface characters, governed by interlocking of the particles. In this study, the effect of powder surface roughness on the green strength of iron powders was investigated using a transverse rupture test. Three-dimensional laser profiler was employed for quantitative analyses of the surface roughness. Two different surface conditions, i.e. surface roughness, of powders were compared. The powders having rough surfaces show higher green strength than the round surface powders since higher roughness leads increasing interlocked area between the contacting powders.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.76-92
• /
• 2016

산업이 고도화될수록 높은 품질과 보다 정밀하게 가공된 제품의 안정된 생산이 요구되고 있으며, 그에 대한 표준화된 측정법 및 관리법이 요구되고 있다. 산업체에서 생산되는 다양한 형태의 제품들 중, 마이크로메타 또는 나노메타 수준의 정밀한 가공 및 측정에 있어서, 정확하고 일관성 있게 빠른 시간 안에 제품분석을 수행 할 수 있는 방법은 오래 전부터 활발히 연구되고 있으며, 그 중 광학 기반의 3D-profiler 는 빠른 속도와 간편한 사용으로 많은 인기를 얻고 있다. 이러한 분석법은 광학 현미경의 평면 분해능을 가지고, 나노크기의 물체 높이를 판별하여, 측정된 정보를 3차원 이미지로 형태를 재 구성할 수 있어, 미세한 표면 조도 변화나 나노 수준의 패턴 단차에 대한 정보를 간단하게 얻을 수 있다. 또한 빛의 간섭현상에 기초하여 시료 표면에 대한 정보를 얻기 때문에 원자단위 이하 수준의 측정 해상도를 가지게 된다. 표면의 칼라패턴에 대해서도 2D 평면 정보를 기초로, 다양한 색상의 패턴들에 대해 각각의 색에 따른 정확한 높이 분석 및 그 패턴 분리, 색깔과 매칭되는 3D 이미지 구현 등과 같은 분석이 가능하여, 이를 활용하여 다양한 분야에서 활발히 사용되고 있다. 실제 현장에서 측정된 다양한 3D 이미지를 소개하며, 이를 통해 광학 3D-Profiler에 대한 전반적인 성능 소개와 그 이해를 돕고자 한다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.769-769
• /
• 2003

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.167-174
• /
• 1995

The anomlous signal, anomaly, recorded by a sub-bottem profiler is analized for exploration of buried objects in the ocean, This anomaly is known as a signal diffracted from the edge of the buried object. Signals obtained from model that and numerical simulation are analized for investigating characteristics of the diffracted signal. From this study a diffracted signal and a non-diffracted signal can be identified, and the location of the object can be obtained. In order to identify an object in the seafloor the dimension of the object should be greater than the wave length used for exploration, and the acoustic impedance should be much greater than that of sediments. A 2-trace stacking of the signals can enhance the feature of strongly diffracted signals whereas it can diminish weak signals.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.192-197
• /
• 2003

The ‘AEIPR’(Accelerometer Established Inertial Profiling Reference) method has been applied to measure the road profile. The dynamic road profiling method using AEIPR has the advantages of cost effectiveness, measuring speed and relatively high reliability. However, it is required to improve the double integration algorithm to get the measurement results with the accuracy of hither level. In the first part of this paper, the effective double integration algorithm is suggested and the ‘Road Profiler’ software is developed on the basis of the algorithm. Road profiling tests are performed using the developed ‘Road Profiler’ system on the specially designed tracks for the durability tests and the various types of pubic roads. Test results are shown and evaluated by the international road evaluation indicies and classification.

• 한국안광학회지
• /
• 제11권2호
• /
• pp.115-119
• /
• 2006

전자파 차폐 기능을 가지고 있는 ITO 코팅층을 안경 유리 기판위에 마그네트론 스퍼터링 방법으로 제조하였다. 코팅된 ITO 층을 surface, profiler, four-point probe, XRD, spectrophotometer 및 Auger electron spectroscopy를 사용하여 기판 온도가 코팅층의 특성 변화에 미치는 영향을 조사하였다. 기판의 온도가 높을수록 전자의 농도가 증가하였으며 가시영역에서 광투과율도 향상되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1575-1577
• /
• 2002

In this research we propose a method far rain rate estimation by using Doppler spectrum's data of wind profiler. The Doppler spectrum is used to calculate the wind velocity and wind direction. But in this research uses the parameters from Doppler spectrum, it calculates the rain rate. The rain rate estimation in this method will be compared to the obtained rain rate from the surface rain gauge. Two equipments are installed in the same area. The correlation coefficient between rain rate measuring method is 0.65.

• Transactions on Electrical and Electronic Materials
• /
• 제3권3호
• /
• pp.1-7
• /
• 2002

The developed patterns by direct writing of electron beam are measured by AFM, FESEM and optical profiler of WYKO NT3300. From different measurement methods, the measured linewidths of the patterns are shown a little bit wider than designed pattern size due to electrons scattering effect during direct writing of electron beam. The optimized conditions of these experiments are suggested and explained for the forming of structures below 0.1 ㎛ dimension size. Because of electron scattering effects from the different under layers such as Si, Si$_3$N$_4$ and aluminum, the developed pattern size is also influenced by the accelerated energy of electrons, dose, resist and soft and hard bake conditions in PMMA. The distributions of electron beam and calculations of backscattering coefficient are demonstrated by Monte Carlo simulation. From the measured results, the developed linewidth of PMMA/Al /silicon is shown a little bit wider than that of PMMA/Si$_3$N$_4$/silicon structure due to the backscattering effects.

• Current Optics and Photonics
• /
• 제2권2호
• /
• pp.172-178
• /
• 2018

We propose a precise 3D endoscopic technique for medical and industrial applications. As the 3D measuring principle, the continuously scanning structured illumination microscopy (CSSIM), which enables to obtain 3D sectional images by the synchronous axial scanning of the target with the lateral scanning of the sinusoidal pattern, is adopted. In order to reduce the size of the probe end, the illumination and detection paths of light are designed as coaxial and a coherent imaging fiber bundle is used for transferring the illumination pattern to the target and vice versa. We constructed and experimentally verified the proposed system with a gauge block specimen. As the result, it was confirmed that the 3D surface profile was successfully measured with $16.1{\mu}m$ repeatability for a gauge block specimen. In order to improve the contrast of the sinusoidal illumination pattern reflected off on the target, we used polarizing optical components and confirmed that the visibility of the pattern was suitable in CSSIM.