• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.12a
• /
• pp.31-42
• /
• 2007

Dc resistivity monitoring has been increasingly used in order to understand the changes of subsurface conditions in terms of conductivity. The commonly adopted interpretation approach which separately inverts time-lapse data may generate inversion artifacts due to measurement error. Eventually the contaminated error amplifies the artifacts when reconstructing the difference images to quantitatively estimate the change of ground condition. In order to alleviate the problems, we defined the subsurface structure as four dimensional (4-D) space-time model and developed 4-D inversion algorithm which can calculate the reasonable subsurface structure continuously changing in time even when the material properties change during data measurements. In this paper, we discussed two case histories of resistivity monitoring to study the ground condition change when the properties of the subsurface material were artificially altered by injecting conductive materials into the ground: (1) dye tracer experiment to study the applicability of electrical resistivity tomography to monitoring of water movement in soil profile and (2) the evaluation of cement grouting performed to reinforce the ground. Through these two case histories, we demonstrated that the 4-D resistivity imaging technique is very powerful to precisely delineate the change of ground condition. Particularly owing to the 4-D inversion algorithm, we were able to reconstruct the history of the change of subsurface material property.

• The korean journal of orthodontics
• /
• v.29 no.3 s.74
• /
• pp.285-301
• /
• 1999

There is a need for more accurate prediction in surgical orthodontic treatment. Video imaging is an important technology in planning orthognathic surgery and educating patients about the esthetic results after treatment. Preoperative and postoperative lateral cephalogram of 30 patients who had one piece Le Fort I osteotomy advancement and mandibular set back by bilateral intraoral vertical ramal osteotomy with or without genioplasty were used in this study. The computer generated soft tissue line drawing prediction were compared with the actual postoperative cephalograms .The results are as follows. 1. 14 variables showed Statistically significant differences from 24 variables between computer predicted profile and post operative profile 2. Most of the differences were found in the maxilla-related soft tissue landmarks. 3. The predicted results were more accurate in the groups who had small amount of mandibular set back. 4. The predicted results were more accurate in the groups who had no genioplasty. Most of these differences were within 2mm ranges. Therefore profile change prediction by video imaging could be considered clinically acceptable.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.3
• /
• pp.171-176
• /
• 1991

Field experiment was conducted to investigate the seasonal change in inorganic nitrogen content in grassland soil profile after urea application. Urea was applied at the levels of 0 (0N), 14 (14N), and 28 (28N) Kg N per 10a. Soil samples were taken at every 20 cm interval upto 100 cm soil depth in spring (May 26), summer (July 27), and autumn (October 18) and analysed for total and inorganic nitrogen ($NH_4-N$ and $NO_3-N$). The results obtained are as follows ; 1. In spring, the $NH_4-N$ content of ON treatment was higher than $NO_3-N$ content both in surface and subsoil. The urea application increasing both $NH_4-N$ and $NO_3-N$ contents in the surface soils and these contents decreased with soil depth. 2. In summer, increase in urea application rate elevated the $NO_3-N$ content in soil profile of 0 to 100cm and the content reached upto 42 ppm in the 28N treatment. 3. The seasonal difference in $NH_4-N$ content between summer and autumn was insignificant throughout soil profile. Soil $NO_3-N$ content in autumn were 7 and 14 ppm for 14N and 28N respectively, showing very low values compared with that of summer. 4. The ratio of inorganic nitrogen to total nitrogen increased with soil depth and with urea application rates.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1611-1615
• /
• 2006

The purpose of this study is to simulate the riverbed profile changes downstream of Daecheong re-regulation dam from 1988 to 2001, to evaluate the model's applicability and to predict a long-term riverbed-level variation between 2002 and 2017. As a result of simulation 14 sediment transport equations provided by GSTAR-1D, it was found that Acker's & White formula was the most stable relatively. The interval used to calculate its stability was 7 days for bankful discharge$(1,000m^2/s)$, 3 days for daily maximum flow$(4,273m^2/s)$, 1 day for hourly maximum flow$(7,605m^2/s)$ and minimum flow$(8.5m^2/s)$. The simulation results of river bed changes were evaluated and compared to its measure data from 1988 to 2001. It was showed that there was the degradation for a section between Daecheong re-regulation dam and Maepo water stage gage station due to bed-material, and the degradation for a reach between Maepo and Gongju water stage gage station due to massive aggregate collection. Also, as a result of simulating the river profile change for 2002 to 2017, it was predicted that the section between Daecheong re-regulation dam and Geumnam Bridge would remain as the present profile and the reach between Maepo and Gongju water stage gage station would have some degradations in several parts, which would be stable as a whole unless it was due to artificial river profile change.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.1
• /
• pp.63-68
• /
• 2009

Purpose: TiN films were deposited on sus304 by unbalanced magnetron sputtering system which was designed and developed as unbalancing the strength of the magnets in the magnetron electrode. The effect of oxygen incorporation in the fabrication of deposited films was investigated. Methods: The cross sections of deposited films on Silicon wafer were observed by SEM to measure the thickness of the films, the components of the surface of the films were identified by XPS survey spectra, the compositional depth-profile of deposited films was examined by an XPS apparatus. Results: From the data of XPS depth profile of films, it could be seen that the element O as well as the elements Ti and N present in the surface of the film and the relative percentage of the element O was constant at 65 at.% with respect to the depth of film. Conclusions: The color change with thickness of the films had something to do with the change of Ti $ 2p_{3/2}$ peak intensity and shape mixed of $ TiO_2$, TiN, $ TiO_{x}N_{y}$ compound.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.4
• /
• pp.365-371
• /
• 2005

In esthetic treatment of bimaxillary protrusion, it is important to move backward the anterior teeth segment. For the backward movement of the anterior teeth segment, orthodontic force and segmental osteotomy have been applied on the clinical treatment until recently. These methods caused long treatment time, anchorage loss, the possibility of root resorption and the complication followed by segmental osteotomy. Therefore, corticotomy has become a major concern lately. This research has been conducted to study the efficiency of corticotomy in the treatment of bimaxillary protrusion comparing the profile change, canine retraction velocity and space closing time. The research compared and analyzed space closing time, canine retraction velocity and profile change in two groups of patients. Both groups were formed out of patients over 18 years old who visited the department of dentistry in Hanyang University for treatments. The experimental group who was treated by corticotomy and Skeletal Anchorage System(SAS). The control group who received orthodontic treatment using SAS. The following results are produced after analyzing both groups. The significant statistic difference in space closing time has been observed in the experimental group as compared with the control group(p<0.05). In the experimental group, the significant statistic increase in canine retraction velocity was also observed(p<0.05). There was no significant difference in profile change between the control group and the experimental group(p<0.05). As a result, orthodontic treatment using corticotomy has a reasonable efficiency in space closing time as compared with the existing orthodontic treatment. Therefore, it is concluded that corticotomy with orthodontic treatment can be reasonably applied to dentofacial abnormality.

• The korean journal of orthodontics
• /
• v.30 no.3 s.80
• /
• pp.355-365
• /
• 2000

The treatment plan for orthognathic surgery must be based on accurate predictions, and this can be produced the most esthetic results. Treatment of prognathic mandible in adult is usually orthognathic surgery using mandible set back, but mandible with retruded chin point is needed additional chin augmentation. In this case, the directions between mandible and chin point are different therefore, the prediction of soft tissue reactions must be modified. In this study, we materialize the patients who was taken orthognathic surgery due to prognathic mandible, 11each(Group A) was taken only Bilateral Sagittal Sprit Ramus Osteotomy (BSSRO), 9each(Group B) was taken additional advancement genioplasty. The lateral cephalometric radiography taken 8 months later after orthognathic surgery by this patients were used. The results of this study were as follows : 1. The profile of lips was favorable after surgery due to upper lip to I-line became prominent and lower lip tc E-line was retruded. 2. In both group, upper lip moved posteriorly and nasolabial angle was increased. 3. The ratio of the soft tissue profile change in POGs point to skeletal B point movement was $84\%$ in group A and $66\%$ in group B, and there was statistical significance between group A and group B. 4. Vertical movement of hard tissue points is decreased in group A.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.3
• /
• pp.313-321
• /
• 2004

Separation-concentration of sulfur containing heterocyclic compounds(SCHC) from many reaction meat flavors manufactured with Maillard reaction was carried out. Profile of SCHC was identified and analyzed by GC and GC-MSD. The results were as follows. 1. Profile of SCHC could be identified 7 kinds thiazole and 11 kinds thiophene, the major produced compounds were thiophene, thiazolidine, 4-methyl-5-thiazole ethanol. 2. In the case of SCHC, relationship between changes of reaction conditions and the kind of produced components were as same, but produced amounts appeared the difference. Producing amount of complexed SCHC and caramellike note as well as oxygen containing heterocyclic compounds were high level more than high reaction temperature and long time reaction period. 3. Producing ratio of comparative simple structural SCHC were the highest level at reaction conditions of moisture content 50%, reaction temperature 100$^{\circ}C$ and reaction time 2 hours. Reaction conditions for the revelation of reaction meat flavor were below 110$^{\circ}C$ and less than 2 hours. 4. Relationship between moisture content and reaction temperature as well as reaction time had very relative relation. From the change of moisture content and reaction conditions could be obtained the simultaneously profile. Signal presentation for production of reaction meat flavor could be from extraction-separation-concentration of SCHC through simplification of raw-materials in the flavor and seasoning food industry.

• Journal of Sensor Science and Technology
• /
• v.23 no.3
• /
• pp.185-191
• /
• 2014

The width of depletion region in a varactor diode can be modulated by varying a reverse bias voltage. Thus, the preferred characteristics of depletion capacitance can obtained by the change in the width of depletion region so that it can select only the desirable frequencies. In this paper, the TV tuner varactor diode fabricated by hyper-abrupt profile control technique is presented. This diode can be operated within 3.3 V of driving voltage with capability of UHF band tuning. To form the hyperabrupt profile, firstly, p+ high concentration shallow junction with $0.2{\mu}m$ of junction depth and $1E+20ions/cm^3$ of surface concentration was formed using $BF_2$ implantation source. Simulation results optimized important factors such as epitaxial thickness and dose quality, diffusion time of n+ layer. To form steep hyper-abrupt profile, Formed n+ profile implanted the $PH_3$ source at Si(100) n-type epitaxial layer that has resistivity of $1.4{\Omega}cm$ and thickness of $2.4{\mu}m$ using p+ high concentration Shallow junction. Aluminum containing to 1% of Si was used as a electrode metal. Area of electrode was $30,200{\mu}m^2$. The C-V and Q-V electric characteristics were investigated by using impedance Analyzer (HP4291B). By controlling of concentration profile by n+ dosage at p+ high concentration shallow junction, the device with maximum $L_F$ at -1.5 V and 21.5~3.47 pF at 0.3~3.3 V was fabricated. We got the appropriate device in driving voltage 3.3 V having hyper-abrupt junction that profile order (m factor) is about -3/2. The deviation of capacitance by hyper-abrupt junction with C0.3 V of initial capacitance is due to the deviation of thermal process, ion implantation and diffusion. The deviation of initial capacitance at 0.3 V can be reduced by control of thermal process tolerance using RTP on wafer.

• Journal of Applied Biological Chemistry
• /
• v.55 no.2
• /
• pp.79-83
• /
• 2012

It has been known that the proteome profiles in the period of growth and development of rice are changed by the growth conditions including temperature, soil, and fertilization. In this study, the proteome profiles of Odae polished white rice grown in Chulwon and Chilgog were compared on 2-dimensional(D) gels. The differentially expressed proteins were selected from the 112 identified total proteins and classified into functional groups. The most significantly differentially expressed proteins were stress responsive proteins; Ent-kaur-16-ene synthase, which is responsible for synthesizing a plant hormone gibberellin, was expressed in Chulwon rice and heat shock proteins were in Chilgog rice, respectively. Xylanase inhibitor protein, which inhibits the enzyme xylanase produced by pathogenic fungi and Bacilli, was expressed significantly high in Chilgog rice grown at high temperature. Differential expressions of transporter proteins were observed both in Chulwon and Chilgog rice. Regarding the facts that Chilgog rice contained relatively higher amount of proteins than Chulwon rice and Chulwon rice showed large number of proteins were differentially expressed, it can be concluded that different cultivation conditions could change the protein expression profiles in rice in various ways, including elevation of protein amount or differential expressions of specific proteins, etc. The results suggest that the characteristics of the profiles of the proteome in the polished white rice are definitely changed by the environmental factors including high temperature. The results can be utilized for the development of the proper cultivation conditions for the production of high quality rice with good palatability.