• Journal of Forest and Environmental Science
• /
• v.29 no.1
• /
• pp.1-14
• /
• 2013

Acacia mangium is an evergreen fast-growing tropical tree, which can grow up to 30 m tall and 50 cm thick, under favorable conditions. It is a low-elevation species associated with rain forest margins and disturbed, well-drained acid soils. It is native to Papua, Western Irian Jaya and the Maluku islands in Indonesia, Papua New Guinea and north-eastern Queensland in Australia. Due to its rapid growth and tolerance of very poor soils, A. mangium was introduced into some Asian, African and western hemisphere countries where it is used as a plantation tree. A. mangium has good quality wood traits, such as a comparatively low proportion of parenchymatous cells and vessels, white and hard wood, and high calorific value. Therefore, it is useful for a variety of purposes, such as furniture, cabinets, turnery, floors, particleboard, plywood, veneer, fence posts, firewood, and charcoal. It is also being used in pulp and paper making because it has good pulp traits, with high yields of pulp, quality of kraft, and produces paper with good optical, physical and surface properties. Because there are significant provenance differences in growth rate, stem straightness, heartwood formation and frequency of multiple leaders, the productivity and quality also varies depending upon environmental conditions, so genetic improvement programmes have been undertaken in countries like Australia, India, Indonesia, Malaysia, the Philippines, Taiwan and Thailand. The programme includes provenance identifications and testing, plus tree selection and clonal multiplication, establishment of seed orchards and hybridization. The phenology, reproductive biology, fruit characteristics, silvicultural practices for cultivation, pest and diseases problems, production of improved planting stock, harvesting, wood properties and utilization have been discussed in this paper.

• Journal of Plant Biology
• /
• v.17 no.4
• /
• pp.158-162
• /
• 1974

Some ecological attributes of perennial plants and Pb contamination were analyzed for study plots near an entrance of Nevade Test Site at Mercury Valley, Nye County, Nevada. The surface of the desert pavement soil was composed of stones (1 to 4cm diameter). The underside of each stone was coated with coarse and fine sand (about 90%). The profiles of soil were constituted with the A-horizon and C-horizon only. The soil pH at the plots ranges from 7.6 to 8.5, C/N was 13 and cation exchange capacity showed 15me/100g. Nine species and 42 number of individuals were found in all plots. Franseria dumosa and Larrea divaricata were dominant species. The discrete clumps of vegetation were consisted of 9 species of common perennials and these were covered about 25% on desert pavement, on the other words, bare area without vegetation was about 75%. The size and spacing of the plants was irregular. Community coefficient as comparison between shrub species in these study area and those in near the low elevation desert indicated a low degree of similarity. Density, cover and productivity in the study plots as compared with those in the nearest study areas in Mercury Valley showed a higher value. The soils in the studied area involved high heavy metal contents in the plant tissue was higher than those of its soil. The leavds of Lycium andersonii tended to accumulate more Zn and Mo than those of the other species. Larrea divaricata leaves accumulated very high leaves of Fe and Ephedra nevadensis were generally high in Mn. Lead contamination was apparent in foliage of desert vegetation collected alongside the roadway, reflecting the variation in traffic volume. Lead contents greater than fifteen-fold of normal (low traffic) were found in plant foliage alongside the heavily traveled roadway. Lead content of old foliage by the heavily traveled roadway was as much as 129 ppm but that of new foliage 17 ppm only.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.1
• /
• pp.103-113
• /
• 2015

Korean pines(Pinus koraiensis) are one of the major plantation species in the Republic of Korea and their natural habitats range from Japan and China to Siberia. The seed of Korean pines, pine nuts, are well know for good food reserves. Due to the global changes which drive the Korean peninsula into the semi-tropical climate, current plantations and natural habitats of Korean pines are faced with the change in the environmental conditions to some extent. To anticipate suitable sites for Korean pines in the future, the location of Korean pines were extracted from the 'Map of suitable trees on a site' that provides the map of suitable trees on a site considering tree species for timber and special uses, and then MaxEnt modelling was used for generating a prediction map on the basis of statistical analysis. As a result, the order of predicted suitable sites were Kangwon-do, Kyungsangbuk-do and Chungcheongbuk-do provinces and sites with high elevation within those provinces were considered most suitable in common. The prediction map of suitable sites for Korean pines presented that suitable sites in the future decreased by 72.2% by 2050's and almost disappeared with a decrease of 92.1% by 2070's on a nationwide scale. In relation to the major production regions of pine nuts in South Korea - Gapyung gun and Yangpyung gun, Kyunggi province and Hongcheon gun, Kangwon province, suitable sites within their areas were predicted to increase by 2050's but become extinct in South Korea by 2070's. To establish a long-term countermeasures against the improvement on forest productivity quality in terms of managing national food security, the result from this study can be considered as a firm basis of predicting plantation suitability. Also, it can be used to predict the changes in supply of forest products and thereby market values in accordance with climate change scenarios.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.143-148
• /
• 2008

This study is VE LCC case analysis on two school BTL projects which is constructed by Private sector and rented to government. Then private sector payback their initial cost and profit by rental fee from government. The VE in Korea, revised by the method of the Construction Technique - Enforcement Ordinance in 2005 is applicable to construction business which size is over 10 billion won. The VE well known as a way of productivity elevation is already proven and outstanding management method In construction industry inside and outside of the courtly. As its unique personality of BTL business, VE workshop period is too short. There is a few accomplished BTL project and data base, because BTL business begun from year of 2006. So we are trying to proof effect of VE LCC through case study of school BTL projects.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.159-166
• /
• 2007

The Value Engineering(VE) well known as a way of Productivity Elevation is already the proven and outstanding management method in Construction Industry the inside and outside of country. The Value Engineering in domestic, revised by the method of the Construction Technique - Enforcement Ordinance ("the Examination of Design Economy") in 2005, is usually applicable to the Construction Work which cost over 10 billon won. But It is true that there is some differences between theory and reality to apply the Value Engineering in domestic. Therefore the differences are blocking process to enlarge and supply the VE in domestic. In this Study, through a case-analysis of the recently accomplished Design Value Engineering, we give a careful consideration to the problem and cause. And we are inclined to contribute to a successful stay of the Design Value Engineering in domestic as offering the solution about those.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.2
• /
• pp.97-106
• /
• 2006

Site index is an essential tool to estimate forest productivity. Generally, a site index equation is developed and used from the relationship between stand age and dominant tree heights. However, there is a limit to the use of the site index equation in the application of variable ages, environmental influence, and estimation of site index for the unstocked forest. Therefore, it has been attempted to develop a new site index equation based on various environmental factors including site, climate, and topographical variables. This study was conducted to develop a site index equation based on the relationship between site index and environmental factors for the species of Pinus koraiensis in Yangpyung-Gun, Gyunggi Province. The influence of climatic factors (temperature and solar irradiation ratio), topographical factors (elevation, slope, ratio of slope to valley and aspect) and soil profiles (soil depth by layer and soil consistency) on site index were evaluated by multiple regression analysis. Five environmental factors were selected in the final site index equation for Pinus koraiensis. The site index equation developed in this study was also verified by three evaluation statistics: model's estimation bias, model's precision, and mean square error of measurement. Based on the site index equation, the number of productive areas for Pinus koraiensis were estimated by applying GIS technique to digitized forest maps. In addition, the distribution of productive areas was compared with the areas of current distribution of Pinus koraiensis. It is expected that the results obtained in this study could provide valuable information about the amount and distribution of productive areas for Pinus koraiensis reforestation.

• Korean Journal of Breeding Science
• /
• v.43 no.5
• /
• pp.442-447
• /
• 2011

This study was carried out to assess the potential of hypocotyl explants for multiple-propagation by intensive sweetener variety with high yielding in stevia of self-fertilization. Agronomical character of self-fertilization shown a height range 72.0~120.7 cm, branch's 4.9~56.6 in stevia. Selection of high content of Rebaudioside A (RA) from segregating population in mixing variety have a variety, 'DA1' (55.2%) from HPLC analysis. On a developing of multiple-propagation in stevia, hypocotyl explants used to select for reasonable medium under the influence of each plant growth regulators concentrations. In a Mix treatment of plant growth regulators, as Murashige and Skoog medium with 1.5 mg/L BA and 0.5 mg/L Kinetin showed the most favorable. We got the multiple-propagation of 30 shoots from one inoculated hypocotyl explants as the result of these bases. Rooting induced superbly on MS medium with 0.1 mg/L IBA with inoculated shoots. All of the rooting plants were adapted to a normal seedling. This method of multi-propagation is used effectively in Rebaudioside A productivity elevation.

• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.91-102
• /
• 1985

Growth and biomass production of natural stands of Quercus variabilis in relation to tree density were studied to obtain basic guide lines for future tending operation. Two natural stands of Quercus variabilis located at 900m (A stand: 6,600trees/ha, $15.84m^2/ha$, $\frac{19}{17-20}$) and 800m (B stand: 4,300trees/ha, $16.65m^2/ha$, $\frac{20}{17-21}$) elevation in Sancheong, Kyongnam Province were selected for the comparative study and following results were obtained through a sample plot method. After diameter of individual trees in the sample plots was measured, twelve average trees from each diameter class were cut felled to measure dry weight of $W_S$, $W_B$, $W_L$, $W_{Ba}$, and standing biomass and biomass production rates by a allometrior regressions related to $D^2H$. Vertical distribution of leaves along the stems indicated that photosynthesis was carried out 2.2m above the ground in Stand A and 1.2m in Stand B. Maximum photosynthesis was located 4.2m and 6.2m above the ground in Stand A and B, respectively. Leaf area index was 4.25ha/ha for Stand A, and 3.89ha/ha for Stand B. Above-ground standing biomass was 49.51 ton/ha for Stand A and 59.20 ton/ha and net annual production was 6.75 ton/ha/yr. for Stand A and 8.99 ton/ha/yr. for Stand B. The ratio of net annual production to standing biomass was 17.5% for Stand A and 16.7% for Stand B. Net assimilation rate was 2.75kg/kg/yr. for Stand A and 3.58kg/kg/yr. for Stand B. Stem wood production rate was 1.46kg/kg/yr. for Stand A and 2.09kg/kg/yr. for Stand B. Bark production rate was 0.60 kg/kg/yr. for Stand A and 0.34kg/kg/yr. for Stand B. Above data indicated that Stand B utilized growing spaces and sites more efficiently than Stand A. It is concluded chat productivity of natural stands of Quercus variabilis can be enhanced through optimization of basal areas and number of tree per hectare and that sound management of natural oak stands should be based on systematic sampling of the area for periodic productivity estimation.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.346-346
• /
• 2017

In Northern Laos, maize is cultivated in continuous cropping without fertilizer, fallowing nor any other soil conservation practice. It is expected that this inadequate management in maize cultivation will degrade soil and decrease yield. However, there is limited information about the change of soil condition and yield under continuous maize cultivation. We tried to evaluate the change of soil condition and yield under continuous maize cultivation in Northern Laos. Our study was conducted in farmer's flat and slope fields in Sainyabuli province where maize cultivation had been introduced earlier than the other provinces of Northern Laos. Our study was conducted in 21 fields in 2014, and in 19 fields in 2015. We analyzed grain yield and soil characteristic (total carbon (TC), total nitrogen (TN), available phosphorus (Av-P), exchangeable cation, pH, soil texture) at 3 places in each field. The 3 places were set at different elevation level (lower position, middle position, upper position) in slope fields. Further, the period of continuous maize cultivation and crop management practice were investigated. Then, by evaluating the relation between the period of continuous maize cultivation and yield and the soil characteristics, the effect of maize cultivation was estimated. Crop management practices were similar among the investigated fields. Maize was cultivated in rain season. Grain seed and cob were harvested on September or October, but shoot was left on the fields. No crop was cultivated during dry season. Fertilization and fallowing has never been conducted under continuous maize cultivation. On the other hand, the period of maize cultivation was different among the fields, and ranged from 2 years to 30 years. In the slope fields, as the period of continuous maize cultivation was longer, the contents of TC and TN were lower at all 3 positions, Av-P content was lower at the upper position, exchangeable potassium (Ex-K) content was lower at the middle and the upper positions. The other soil characteristics weren't related with the period of maize cultivation in the slope fields. In contrast, soil characteristics weren't related with the period of maize cultivation in the flat fields. Yield was lower as the period of maize cultivation was longer at the upper position of the slope fields. At middle position of slope fields, yield tended to be low with increase of the period of maize cultivation. In contrast, yield wasn't related with the period of continuous maize cultivation in flat fields. From the results about crop management, it was presumed that the period of maize cultivation was one of the main factors causing the difference of yield and soil characteristics among the fields. Therefore, from the result of yield and soil condition, it was considered that the continuous maize cultivation decreased soil productivity in the slope fields with decline of TC, TN, Av-P, Ex-K and yield at upper position of slope fields, and decline of TC and TN in the other positions in Sainyabuli province.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.