• 수산해양기술연구
• /
• 제47권3호
• /
• pp.248-256
• /
• 2011

The inherent efficiency of a ship would be prior to any other quality factors in ship's safety, because lack of it may give rise to a serious sea casuality even if it were a light mistake in operation. And the representative casualty comes from a deficiency of stability and an operating error combined would be capsizing. The Korean offshore large purseiner looks to have a structural weak point with small range of stability in spite of her big initial metacentric height, and have various type of roll reduction devices in order to cover up the defect. The aim of this study is to grasp for the roll reduction characteristics of the purseiner with bilge keel only and a stern keel additionally attached. The results are summarized as follows; The rolling angle of the model ship was increased in accordance with increase of the wave period and height, especially at close to the natural wave period of her, and the trends were more distinguished in the situation of bilge keel only installation than in the stern keel additionally installed. And stern keel has not noticeable effect on the reduction of the roll in the light ship condition, but has a little effect in full load condition.

• Korean Chemical Engineering Research
• /
• 제48권1호
• /
• pp.10-15
• /
• 2010

다양한 원료유로부터 바이오디젤을 효율적으로 생산할 수 있는 고체촉매 개발을 위한 연구가 활발하게 진행되고 있다. 다양한 고체촉매 중 금속산화물계 촉매와 이온교환수지 촉매가 특히 유망한 것으로 평가되고 있다. 금속 산화물계 촉매의 경우 고체 촉매의 활성을 높이기 위해 반응 활성이 높은 촉매성분과 지지체의 탐색 및 촉매 성분을 지지체에 안정적으로 담지할 수 있는 기술이 주로 연구되고 있다. 특히 금속 산화물 촉매는 열적 안정성이 우수하여 고온이 요구되는 폐유지의 전이에스테르화- 에스테르화 동시 반응 시스템에서 활용성이 높을 것으로 평가된다. 이온교환수지 촉매는 반응 온도가 제한되므로 유리지방산의 에스테르화 반응 연구에 주로 적용되고 있다. 두 가지 고체촉매 모두 상용화 공정에 적용을 위해서는 보다 많은 연구가 진행되어야 한다. 특히 고체 촉매의 재사용에 따른 활성 저하 문제 해결이 주 과제가 될 것으로 보인다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권9호
• /
• pp.1363-1372
• /
• 2019

Objective: This study was designed to investigate the effect of diet supplementation with rubber seed oil and flaxseed oil on serum fatty acids profile, oxidation stability of serum and milk, and immune function of dairy cows. Methods: Forty-eight mid-lactation Holstein dairy cows were randomly assigned to one of four treatments for 8 wk, including basal diet (CON) or the basal diet supplemented with 4% rubber seed oil (RO), 4% flaxseed oil (FO) or 2% rubber seed oil plus 2% flaxseed oil (RFO) on a dry matter basis. Results: Compared with CON, all the oil groups increased the levels of trans-11 C18:1 (vaccenic acid), cis-9, trans-11 C18:2 (conjugated linoleic acid, CLA) and C18:3 (${\alpha}$-linolenic acid, ALA) in serum. Both the activity of glutathione peroxidase and catalase in serum and milk in oil groups were decreased, which were negatively correlated with the levels of cis-9, trans-11 CLA and ALA. The concentrations of proinflammatory factors (tumor necrosis factor ${\alpha}$ and interferon ${\gamma}$) in serum of oil groups were lower than that from the CON cows. Conclusion: These results indicate that diet supplementation with RO or FO could alter serum fatty acid profile and enhance the immune function of dairy cows. However, the negative effect on milk oxidation stability should be considered when feeding these n-3 polyunsaturated fatty acid-enriched oils in dairy production.

• 한국전기전자재료학회논문지
• /
• 제37권4호
• /
• pp.400-406
• /
• 2024

Next-generation wide-bandgap semiconductors such as SiC, GaN, and Ga2O3 are being considered as potential replacements for current silicon-based power devices due to their high mobility, larger size, and production of high-quality wafers at a moderate cost. In this study, we investigate the gradual modulation of chemical composition in multi-stacked metal oxide semiconductor thin films to enhance the performance and bias stability of thin-film transistors (TFTs). It demonstrates that adjusting the Ga ratio in the indium gallium oxide (IGO) semiconductor allows for precise control over the threshold voltage and enhances device stability. Moreover, employing multiple deposition techniques addresses the inherent limitations of solution-processed amorphous oxide semiconductor TFTs by mitigating porosity induced by solvent evaporation. It is anticipated that solution-processed indium gallium oxide (IGO) semiconductors, with a Ga ratio exceeding 50%, can be utilized in the production of oxide semiconductors with wide band gaps. These materials hold promise for power electronic applications necessitating high voltage and current capabilities.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권9호
• /
• pp.1278-1284
• /
• 2017

Objective: To assess the potency of calcium propionate (CAP) used as silage additive, an experiment was carried out to evaluate the effect of CAP on the nitrogen transformation, fermentation quality and aerobic stability of alfalfa silages. Methods: Alfalfa was ensiled with four levels of CAP (5, 10, 15, and 20 g/kg of fresh weight [FW]) in laboratory silos for 30 days. After opening, the silages were analyzed for the chemical and microbiological characteristics, and subjected to an aerobic stability test. Results: The increasing proportion of CAP did not affect pH, lactic acid (LA) concentrations and yeast counts, while linearly decreased counts of enterobacteria (p = 0.029), molds (p<0.001) and clostridia (p<0.001), and concentrations of acetic acid (p<0.001), propionic acid (p<0.001), butyric acid (p<0.001), and ethanol (p = 0.007), and quadratically (p = 0.001) increased lactic acid bacteria counts. With increasing the proportion of CAP, the dry matter (DM) loss (p<0.001), free amino acid N (p<0.001), ammonia N (p = 0.004), and non-protein N (p<0.001) contents were linearly reduced, whereas DM (p = 0.048), water soluble carbohydrate (p<0.001) and peptide N (p<0.001) contents were linearly increased. The highest Flieg's point was found in CAP10 (75.9), represented the best fermentation quality. All silages treated with CAP improved aerobic stability as indicated by increased stable hours compared with control. Conclusion: The addition of CAP can suppress the undesirable microorganisms during ensiling and exposure to air, thereby improving the fermentation quality and aerobic stability as well as retarding the proteolysis of alfalfa silage. It is suggested that CAP used as an additive is recommended at a level of 10 g/kg FW.

• Journal of Microbiology and Biotechnology
• /
• 제11권2호
• /
• pp.222-228
• /
• 2001

Vibrio metschnikovii strain RH530 is a non-pathogenic, industrially-important alkaline protease producer which has been isolated from wastewater. In this paper, we report on the transformation of this strain by using the method of electroporation. A field strength of $7.5\;kVcm^{-1}$ and $25\;{\mu}F$, and using a 0.2-cm cuvette, appeared to be the optimal conditions for electroporation of the cells with the recombinant pSBCm plasmid carrying the vapK alkaline protease gene and the ColE1 replicon. Cells were subjected to osmotic shock in order to remove extracelluar DNase, and adding 200 mM of sucrose to electroporation buffer cells showed an increased transformation efficiency. Maximum efficiency of transformation was obtained at an early exponential growth phase. Using all of the conditions mentioned above, we routinely obtained a transformation efficiency of more than $10^4{({\mu}g\;plasmid\;DNA)}^{-1}$. The stability of the plasmid pSBCm in V. metschnikovii RH530 was 25% after 18h of growth (27 generations) in the medium without antibiotic selection. The insertion of the par locus to the pSBCm increased the stability of the plasmid up to 42% without selective pressure. The increase in plasmid stability was accompanied by the increase in the productivity of alkaline protease in the recombinant V. metschnikovii strain RH530. Determining optimal conditions for the transformation of the industrially-important, nonpathogenic Vibrio strain, and the improvement of plasmid stability by introducing the par locus into the high copy number plasmid vector, will allow the development of procedures involved in the genetic manipulation of this strain, particularly for its use in the production of industrial enzymes such as alkaline protease.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.484.2-484.2
• /
• 2014

There are many efforts to improving the power conversion efficiencies (PCEs) of dye-sensitized solar cells (DSCs). Although DSCs have a low production cost, their low PCE and low thermal stability have limited commercial applications. This study describes the preparation of a novel multifunctional polymer gel electrolyte in which a cross-linking polymerization reaction is used to encapsulate $TiO_2$ nanoparticles toward improving the power conversion efficiency and long-term stability of a quasi-solid state DSC. A series of liquid junction dye-sensitized solar cells (DSCs) was fabricated based on polymer membrane encapsulated dye-sensitized $TiO_2$ nanoparticles, prepared using a surface-induced cross-linking polymerization reaction, to investigate the dependence of the solar cell performance on the encapsulating membrane layer thickness. The ion conductivity decreased as the membrane thickness increased; however, the long term-stability of the devices improved with increasing membrane thickness. Nanoparticles encapsulated in a thick membrane (ca. 37 nm), obtained using a 90 min polymerization time, exhibited excellent pore filling among $TiO_2$ particles. This nanoparticle layer was used to fabricate a thin-layered, quasi-solid state DSC. The thick membrane prevented short-circuit paths from forming between the counter and the $TiO_2$ electrode, thereby reducing the minimum necessary electrode separation distance. The quasi-solid state DSC yielded a high power conversion efficiency (7.6/8.1%) and excellent stability during heating at $65^{\circ}C$ over 30 days. These performance characteristics were superior to those obtained from a conventional DSC (7.5/3.5%) prepared using a $TiO_2$ active layer with the same thickness. The reduced electrode separation distance shortened the charge transport pathways, which compensated for the reduced ion conductivity in the polymer gel electrolyte. Excellent pore filling on the $TiO_2$ particles minimized the exposure of the dye to the liquid and reduced dye detachment.

• Journal of Microbiology and Biotechnology
• /
• 제2권1호
• /
• pp.26-34
• /
• 1992

The effect of induction temperature on fermentation parameters has been investigated extensively using Escherichia coli M5248[pNKM21], a producer of recombinant human interleukin-2 (rhIL-2). In this recombinant microorganism, the gene expression of rhIL-2 is regulated by the cI857 repressor and $P_L$ promoter system. The recombinant fermentation parameters studied in this work include the cell growth, protein synthesis, cell viability, plasmid stability, $\beta$-lactamase activity, and rhIL-2 productivity. Interrelationships of such fermentation parameters have been analyzed through a quantitative assessment of the experimental data set obtained at eight different culture conditions. While the expression of rhIL-2 gene was repressed at culture temperatures below $34^\circ{C}$ with little effect on other fermentation parameters, under the conditions of rhIL-2 production $>(36~44^\circ{C})$ the cell growth, plasmid stability, and $\beta$-lactamase activity were, as induction temperature was increased, more profoundly reduced. Although the rhIL-2 content in the insoluble protein fraction was maximum at $40^\circ{C}$, total rhIL-2 production in the culture volume was found to be highest at the induction temperature of $36^\circ{C}$. This was in contrast to the previously known optimum induction temperature of the P$_{L}$ promoter system $>(40~42^\circ{C})$.Explanations for such a discrepancy have been proposed based on a product formation kinetics, and their implications have been discussed in detail.l.

• Journal of Microbiology and Biotechnology
• /
• 제8권4호
• /
• pp.353-360
• /
• 1998

A bacterial strain PN33 producing large amounts of extracellular pectin lyase (PNL, EC 4.2.2.10) was isolated from soil. The isolated bacterium was identified as a strain of Bacillus sp. Production of PNL by the strain was induced only by pectins, with a higher degree of esterification, which had been added to the culture medium as a sole carbon source. The optimal medium for PNL production was determined to consist of 10 g pectin, 2 g yeast extract, 4 g $K_2HPO_4{\cdot}3H_2O$, 0.6 g $MgSO_4$, and 0.11 g $CaCl_2$ per liter (pH 7.0). The PNL activity in the culture supernatant reached the highest level of 132 mU/ml after 32 h cultivation at $37^{\circ}C$ in the optimal medium. The PNL produced was purified to homogeneity by ammonium sulfate fractionation (50~80%), and cation exchange and size exclusion chromatographies. The molecular mass of the enzyme was estimated to be approximately 52 kDa by SDS-PAGE. Almost the same mass was determined by nondenaturing PAGE, indicating that the functional enzyme had a monomeric structure. As expected, the PNL exhibited higher activities on the highly esterified pectins whereas it gave no detectable activity on polygalacturonic acid. The enzyme showed the highest activity at the acidic pH of 6.0, exceptional for a bacterial PNL. Maximum activity was measured at $40^{\circ}C$, although the stability f the purified enzyme was poor at this temperature. alcium (1 mM) was found to activate the PNL activity by $50\%$, and also remarkably increased the thermal stability f the enzyme. Phenylmethylsulfonylfluoride (PMSF) and iethylpyrocarbonate (DEPC) inhibited the PNL activity lmost completely at the concentration of 5 mM. This result ndicates that some serine and histidine residues of the nzyme may play an essential role for catalytic function of he enzyme.

• KSBB Journal
• /
• 제15권2호
• /
• pp.181-187
• /
• 2000

본 연구에서 갈락토즈를 거의 사용하지 않고 glucose repression 정도가 줄어든 변이주를 이용하여 fed-batch를 통한 발현최적화를 수행하였다. 두 균주에서의 GAL promoter에 의한 외래단백질 생산시 glucose repression 정도에 대해 조사하였는데 대조구 Y2805는 글루코즈가 다 소비된 후 2∼3시간 지난 후 발현이 시작되나 변이주 Y334는 약 0.5 g/L 글루코즈 농도에서 25%정도의 발현이 이루어짐에 따라 변이주 Y334는 GAL promoter에 미치는 glucose repression 정도가 매우 약한 장점을 확인하였다. 배양 중 재조합 미생물인 두균주 변이주 Y334와 대조구 효모 Y2805의 plasmid stability에 대해 안정한 균주임을 알 수 있었으며 대조구 Y2805의 경우도 plasmid stability는 90%로 유지됨을 알 수 있었다. GAL promoter에 의한 외래 단백질 생산시 글루코즈와 갈락토즈, 에탄올의 소비속도를 조사하였는데, 글루코즈와 에탄올의 소비속도는 거의 비슷하였으나 갈락토즈 소비속도는 Y2805는 0.1232 g/L/hr/O.D.이고 변이주 Y334는 0.0131 g/L/hr/O.D. 이다. 또한 mutant Y334와 대조구 효모 Y2805의 Fed-batch 시의 올바른 feeding 방법을 구하기위한 실험을 수행하여 각 균주의 Fed-batch 실험에서의 최적 발현 방법을 획득하였다.