• Journal of the Korean Data and Information Science Society
• /
• v.17 no.4
• /
• pp.1299-1307
• /
• 2006

This study investigates solving production problems in an automotive stamping plant using Finite Element (FE) analysis. The fundamentals of stamping, metal plasticity and FE analysis are developed. In this paper, we provide the basis for a simulation of the stamping of a production part, the automotive rear floorpan. On-plant factorial Design of Experiments (DoE) were simulated using the floorpan model. The accuracy of the simulations was undetermined because of variability in the DoE results. Predictions of flange shape, wrinkling and thickness show qualitative agreement with manufactured parts and indicate that simulating an industrial part is feasible.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.80-85
• /
• 2002

The progressive die for U-bending production part is a very specific division. This study reveals the Sheet metal forming process with multi-forming die by Center Carrier type feeding system. Through the FEM simulation by DEFORM it was accepted to u-bending process as the first performance to design in strip process layout design. The next process of die development was studied according to sequence of die development.

• 연구논문집
• /
• s.26
• /
• pp.57-68
• /
• 1996

Recently, a lot of researches on material handling system are actively studied for realization of FA(Factory Automation), FMS(Flexible Manufacturing System) and CIM(Computer Integrated Manufacturing). Management and application of material handling system are precondition technologies playing an important part in integration of production system including manufacturing. assemhly, and inspection cell. In this paper, the general situation of automation technology is investigated and technology level is analyzed in comparision with an advanced country. And the operation trend and part of material handling system including AS/RS, AGV, and Conveyor, are studied. And also technologies related to material handling system in the inside and outside of the country are studied.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.231-235
• /
• 2000

Precision progressive die have used for above ten thousand pieces of lot size production part. In the field of design and making tool for press working, the progressive die for sheet metal (SPC, thickness : 2mm) is a specific division. In order to prevent the defects, the optimum design of the U-bending production part, strip layout, die design, die making and tryout etc. are necessary. They require analysis of many kinds of important factors, i.e. theory and practice of metal pres working and its phenomena, die structure, machining condition for die making, die materials, heat treatment of die component, know-how and so on. In this study, we designed and constructed a progressive die of multi-stage and performed try out. Out of these processes the die development could be taken for advance. Especially the result of tryout and its analysis become the characteristics of this paper (part 1 and part 2) that nothing might be ever seen before such as this type of research method on all the processes. In the part 2 of this study we treated die making and tryout mostly.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.218-223
• /
• 2000

Ultra precision progressive die have used for above one million's lot size of production part. In the field of design and making tool for press working, the progressive die for sheet metal (STS 304, thickness : 0.5mm) is a specific division. In order to prevent the defects, the optimum design of the production part, strip layout, die design, die making and tryout etc. are necessary. They require analysis of many kinds of important factors, i.e. theory and practice of metal press working and its phenomena, die structure, machining condition for die making, die materials, heat treatment of die component, know-how and so on. In this study, we designed and constructed a progressive die of multi-stage and performed try out. Out of these processes the die development could be taken for advance. Especially the result of tryout and its analysis become the characteristics of this paper (part 1 and part 2) that nothing might be ever seen before such as this type of research method on all the processes. In the part 2 of this study we treated die making and tryout mostly.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.68-74
• /
• 2000

The STL file format is an approximation of 3-D model with triangular facets. STL is a standard input file format of Rapid Prototyping(RP) equipment In computer graphics a circle has been approximated with an inscribed polygon which causes an error between the real and approximated circles. In this study an intersecting polygon has been used to approximate the circle and applied to produce more accurate RP part. The newly proposed method shows it's excellence in part accuracy.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1977.10a
• /
• pp.197.4-197
• /
• 1977

Efficient utilization of cellulosic material as renewable resources is drawing an increasing degree of attention in the scientific community. As part of our endeavor to improve the production of cellulase complex system, several factors that influence production of cellulolytic enzyme system have been studied.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.548-556
• /
• 2013

A tapered production tubing with two different inner diameters has been suggested to increase production rates. In this research, various tapered tubing combinations are taken into account and possible tubing combinations are proposed to satisfy each objective. In previous studies, production enhancement was the main goal. However, this research also considers flow stability by analyzing tubing pressure traverse, liquid holdup, and operating conditions. For a reservoir assumed in this research, a tapered tubing of, 4.5 inch inner diameter(ID) and 2000 ft in length in the lower part and 5.5 inch ID and 8000 ft in the upper part, shows the highest net present value. Compared to a mono tubing, tapered tubings enable various tubing designs because they have smaller differences in frictional pressure loss. It is important to maintain low liquid holdup to prevent liquid loading. Smaller ID of tapered tubing in the lower part enables to achieve the object. In conclusion, it is identified that various tubing designs are achievable from the analyses of overall production operations depending on purposes specified.

• Journal of Community Nutrition
• /
• v.4 no.2
• /
• pp.130-135
• /
• 2002

The purposes of this study were to quantify and compare the kind and amount of solid waste generated in two school foodservice operations located in urban and rural areas. A waste stream analysis was conducted to quantify and characterize the kind of waste in the production and service parts of each operation. The SPSS 10.0 for window was used for data analysis. Non-parametric test (Mann-Whitney) was adopted to determine if significant differences exist in amounts of waste generated in the urban school and the rural school. An average of 415 meals, including 43 adult meals, were served daily in the urban school, while an average of 177 meals, including 24 adult meals, were served daily in the rural school. Food waste generated in the production part in the urban school composed approximately 87% and 45%, while that in the rural school composed 71% and 28% by weight and volume, respectively. Waste per meal was not significantly different between the urban school and the rural school in the production part except the cardboard waste. The total waste per meal at lunch was 154g or 465m1 in the urban school and 51g or 334m1 in the rural school. Students in the urban school discarded significantly more food waste and milk than students in the rural school did. The research results suggest that school foodservice dietitians should evaluate the acceptability of menu items based on food waste per meal, and assess the feasibility of implementing a plan for recycling packaging waste and composting organic waste.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.3
• /
• pp.137-148
• /
• 2008

This article investigates the production process of knitwear focused on patterns and armhole forms in order to provide basic data for its value-added production. This study was based on empirical data obtained by questionnaires given to 51 respondents employed at knitwear companies. The data had been statistically analyzed with frequency analysis, one-way ANOVA, and Duncan test. The results of this study are the following: First, many knitwear companies used knitting machines, which had gauges as high as 14G. Second, most knitwears companies did not use patterns in the production process. Third, most knitwear companies produced knitwears in which armhole lines were different between the front part and back part of the body, while identical between the front and back parts of the sleeves. Fourth, people with experience in the knitwear industry had the tendency to recognize that armhole lines should be different between the front part of both the body and sleeves and their back part as well, and workers in charge of knitting recognized better than programmers and designers did. Considering the opinions of experienced workers that armhole lines differ between the front and back parts of both the body and sleeves would improve the appearance of knitwear, this study also suggests knitwear patterns of 10G and 16G by using ESMODE's basic knitwear pattern.