• Title/Summary/Keyword: production part

Search Result 2,544, Processing Time 0.04 seconds

Studies on the Petroleum hydrocarbon-utilizing Microorganisms(Part 1) -On the Production of Protein from the Yeast-cell- (석유(탄화수소) 이용미생물에 관한 연구(제 1보) -효모세포에 의한 석유로부터 단백질 생성에 관하여-)

  • Lee, Ke-Ho;Shin, Hyun-Kyung
    • Applied Biological Chemistry
    • /
    • v.13 no.1
    • /
    • pp.43-50
    • /
    • 1970
  • To study the productivity of single cell protein from the petroleum hydrocarbon utilizing yeasts, 242 soil samples, such as oil soaked soil of gas stations and garage, coal, farm soil, and sewage, from 135 places in Korea were collected. From these samples 468 yeast strains which utilize petroleum hydrocarbon as a sole organic carbon source were isolated and identified by observing the growth rates. For the identified strains optimum culture conditions were determined and analysis of cell components were performed. 1. 90.8% of petroleum hydrocarbon utilizing yeast strains were found from oil soaked soil and about 10% from coal, farm soil and sewage etc. 2. The yeast strain of the highest cell productivity was isolated from oil soaked soil and was identified as Candida curvata HY-69-19. 3. The optimum culture conditions for the selected yeast strain were found to be pH 5.0, $28^{\circ}C$ and affluent aerated state. 4. Candida curvata HY-69-19 was found to utilize favorably the heavy gas oil fractionated at above $268.9^{\circ}C$ as carbon source and urea as inorganic nitrogen source. 5. The growth curve of this strain on heavy gas oil medium showed that the yeast has a lag phase up to 18 hours and logarithmic growth phase between 24 to 42 hours. Generation time was found to be between 3.8 and 4.5 hours during the logarithmic growth phase. 6. About 300 mg dried cells per heavy gas oil was harvested under the culture conditions of adjusted pH to 5.0 at time intervals of 6 hours for 54 hours and heavy gas oil urea for shaking culture medium. 7. Chemical composition of the yeast cell was found to be 40.25%, 14.81%, 24.32% and 10.63% for crude protein, crude lipid, carbohydrate and ashes, respectively.

  • PDF

Development of Heat Exchanger for Fermentation Heat Utilization from Waste Woody Biomass (목질계 폐바이오메스의 발효열이용 열교환기의 개발)

  • Cho, Nam-Seok;Choi, Tae-Ho;Kim, Hong-Eun;Lee, Suk-Ho;Lee, Chung-Koo
    • Journal of the Korean Wood Science and Technology
    • /
    • v.37 no.1
    • /
    • pp.94-104
    • /
    • 2009
  • It is urgently required to develop the production of fermentation-heat energy from the waste agricultural and forest biomass and its effective heat exchanging system for the supply of warm water to rural households and greenhouses. In this study 3 helical-type and 1 plate-type heat exchangers using 3 different waste biomasses [e.g. hardwood (HW) sawdust (100%), softwood (SW) sawdust : HW sawdust (50 : 50) and HW sawdust : grass (90 : 10)] were applied in order to find out the best heat recovery system. The heat exchanger was basically considered to improve the overall heat recovery efficiency, to minimize heat loss and to simplify manufacturing, assembling and breaking up the fermenting beds. The helical-type heat exchanger (HX-H3) installed in fermenting bed of HW sawdust : grass (90 : 10) showed relatively higher temperature profiles, in particular mid- and upper-parts than lower and surface parts during 45-day fermentation process. The maximum temperature was ranged from $40^{\circ}C$ to $65^{\circ}C$ with average $60^{\circ}C$. The water temperature of tank outlet was ranged to $33{\sim}48^{\circ}C$ during whole measuring periods. By the way plate-type one (HX-P) installed in same biomass compositional fermenting bed showed $64.5{\sim}76.5^{\circ}C$ at center part, and $43{\sim}56^{\circ}C$ and $42{\sim}58^{\circ}C$, water tank and tank outlet temperatures, respectively, during 100 day measurement. It could be concluded that the plate-type heat exchanger (HX-P) provides not only the effective heating for the rural households and greenhouses, but also having the best heat recovery performance, easy manufacturing, assembling and breaking up the systems.

A Study of the Training for the Literary Scholars and of the Compilation and the Publication of Anthologies during the Reign of the King Sungjong in Chosun Dynasty (성종조의 문사양성과 문집편간)

  • Shin Seung-woon
    • Journal of the Korean Society for Library and Information Science
    • /
    • v.28
    • /
    • pp.301-390
    • /
    • 1995
  • In this paper, I intended to study the policy executed by the king Sungjong(성종), the ruler of the early Chosun(조선) Dynasty, for the purpose of the training for the literary scholars under the diplomatic necessity and from his own interest in literature, and the compilation and the publication of anthologies of the famous civil officials in those days under the influence of this policy. The overall findings of the study can be summarized as follows : 1. Sungjong was comparable with the Sejong(세종) in his studiousness and especially, he was very interested in literature. He composed verses personally, showed them to his civil officials and demanded their poems in response to his own ones. Futhermore, he executed steadily the institutions of Eung-je(응제), Kaw-si(과식) and Weol-kwa(월과) that demanded creative writings from his civil officials. The purpose of these institutions which was propelled by the king Sungjong was the training for the literary scholars under the diplomatic necessity. 2. Chosun Dynasty exchanged envoys with Myeong(명) Dynasty during the time of the king Sungjong as many as 100 times. The training for the excellent literary scholars was nationally urgent problem because the competent literary scholars were needed whenever Myeong Dynasty dispatched the envoys to Chosun Dynasty. Eung-je, Kwa-si and Weol-kwa were executed from practical demand and 1 - 3 persons at the minimum, 60 - 70 persons at the maximum took part in this institution at a time. This means that 60 - 70 literary works were produced at a time. Therefore, the steady execution of Eung-je, Kwa-si and Weol-kwa inevitably resulted in mass production of literary works. 3. The king Sungjong instructed his civil officials to compile the anthologies of the then representative civil officials as a means to encourage literary compositions, read it himself and took actions to publish them at the expense of government. There were six anthologies compiled and published under this policy of the king Sungjong, Kang Heui­maeng's Sasukjejib(강희맹, 사숙제집), Shin Suk-ju's Bohanjaejib(신숙단, 보한제집), Kim Su-on's Shikujib (김수온, 식우집), Choe Hang's Taeheojeongjib(최항, 태허정집), Seo Keo-jeong's Sagajib (서거정, 사가집), Lee Seok-hyeong's Jeoheonjib(이석형, 저헌집). Yu Ho-in's Noekyejib(유호인, 뇌계집+CZ48), Lee Seung-so's Samtanjib(이승소, 삼탄집), Kim Jong-jik's Jeompiljaejib(김종직, 점필제집) of three were examined by the king Sungjong, but published later because of the death of the king. 4. jeompiljaejib was compiled by order of the king Sungjong and passed Eulram (을람 : king reads an anthology personally) which contained Joeuijemoon(조의제문) that criticized the king Sejo(세조) who had usurped a throne. The recording of Joeuijemoon became an issue in process of Muosahwa(무오사화), and it was ordered that the printing blocks should be broken and the published books should be collected and be burnt up. These procedures destroyed the social atmosphere that people considered it an honor writing literary compositions, compiling and publishing anthologies thanks to the steady efforts of the king Sungjong. 5. It had an important effect on the compilation and the publication of anthologies after that, breaking the printing blocks, collecting and burning up the pulished books of Jeompiljaejib because of recording of Joeuijemoon. Namely, it got universalized to delete compositions that can cause problems in the future as well as the parts related to political issue, from the objects of recording. Such tendency became one of the important principles of the anthological compilation after that.

  • PDF

Trend and Further Research of Rice Quality Evaluation (쌀의 품질평가 현황과 금후 연구방향)

  • Son, Jong-Rok;Kim, Jae-Hyun;Lee, Jung-Il;Youn, Young-Hwan;Kim, Jae-Kyu;Hwang, Hung-Goo;Moon, Hun-Pal
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.47
    • /
    • pp.33-54
    • /
    • 2002
  • Rice quality is much dependent on the pre-and post harvest management. There are many parameters which influence rice or cooked rice qualitys such as cultivars, climate, soil, harvest time, drying, milling, storage, safety, nutritive value, taste, marketing, eating, cooking conditions, and each nations' food culture. Thus, vice evaluation might not be carried out by only some parameters. Physicochemical evaluation of rice deals with amy-lose content, gelatinizing property, and its relation with taste. The amylose content of good vice in Korea is defined at 17 to 20%. Other parameters considered are as follows; ratio of protein body-1 per total protein amount in relation to taste, and oleic/linoleic acid ratio in relation to storage safety. The rice higher Mg/K ratio is considered as high quality. The optimum value is over 1.5 to 1.6. It was reported that the contents of oligosaccharide, glutamic acid or its derivatives and its proportionalities have high corelation with the taste of rice. Major aromatic compounds in rice have been known as hexanal, acetone, pentanal, butanal, octanal, and heptanal. Recently, it was found that muco-polysaccharides are solubilized during cooking. Cooked rice surface is coated by the muco-polysaccharide. The muco-polysaccharide aye contributing to the consistency and collecting free amino acids and vitamins. Thus, these parameters might be regarded as important items for quality and taste evaluation of rice. Ingredients of rice related with the taste are not confined to the total rice grain. In the internal kernel, starch is main component but nitrogen and mineral compounds are localized at the external kernel. The ingredients related with taste are contained in 91 to 86% part of the outside kernel. For safety that is considered an important evaluation item of rice quality, each residual tolerance limit for agricultural chemicals must be adopted in our country. During drying, rice quality can decline by the reasons of high drying temperature, overdrying, and rapid drying. These result in cracked grain or decolored kernel. Intrinsic enzymes react partially during the rice storage. Because of these enzymes, starch, lipid, or protein can be slowly degraded, resulting in the decline of appearance quality, occurrence of aging aroma, and increased hardness of cooked rice. Milling conditions concerned with quality are paddy quality, milling method, and milling machines. To produce high quality rice, head rice must contain over three fourths of the normal rice kernels, and broken, damaged, colored, and immature kernels must be eliminated. In addition to milling equipment, color sorter and length grader must be installed for the production of such rice. Head rice was examined using the 45 brand rices circulating in Korea, Japan, America, Australia, and China. It was found that the head rice rate of brand rice in our country was approximately 57.4% and 80-86% in foreign countries. In order to develop a rice quality evaluation system, evaluation of technics must be further developed : more detailed measure of qualities, search for taste-related components, creation and grade classification of quality evaluation factors at each management stage of treatment after harvest, evaluation of rice as food material as well as for rice cooking, and method development for simple evaluation and establishment of equation for palatability. On policy concerns, the following must be conducted : development of price discrimination in conformity to rice cultivar and grade under the basis of quality evaluation method, fixation of head rice branding, and introduction of low temperature circulation.

Uptake and Translocation of Heavy Metals to Rice Plant on Paddy Soils in "Top-Rice" Cultivation Areas (탑라이스 생산지역 논 토양 중 잔류중금속의 벼 흡수이행)

  • Park, Sang-Won;Yang, Ju-Seok;Ryu, Seung-Won;Kim, Dae-Yeon;Shin, Joung-Du;Kim, Won-Il;Choi, Ju-Hyeon;Kim, Sun-Lim;Saint, Andrew Flynn
    • Korean Journal of Environmental Agriculture
    • /
    • v.28 no.2
    • /
    • pp.131-138
    • /
    • 2009
  • Heavy metal residues in soil, rice straw, unhulled rice, rice hull, polished rice, and rice barn on the rice paddy in the "Top rice production complex which is non-contaminated area were evaluated. It was observed that the average concentrations of As, Cd, Cu, Pb, and Hg in the paddy soils were 1.235, 0.094, 4.412, 4.728 and 0.0279 mg/kg, respectively. There were no cultivation areas exceeded of the threshold for soil contamination designated by "The Soil Environment Conservation Law" in Korea. For the polished rice, there were no samples exceeded of a permissible level of heavy metal residues such as 0.051 mg/kg of As, 0.040 mg/kg of Cd, 0.345 mg/kg of Cu, 0.065 mg/kg of Pb and 0.0015 mg/kg of Hg. For the uptake and translocation of heavy metals to rice plant, a main part of heavy metal accumulation was rice straw, and then rice bran. Furthermore, it shown that accumulation of heavy metals in unhulled rice, rice hulls, brown rice, and polished rice was approximately similar as low. The slopes of translocation of heavy metals from soil to polished rice were following order as Cd, 0.4321 > Cu, 0.054 ${\fallingdotseq}$ Hg, 0.052 > As, 0.021 > Pb, 0.008. It was observed that potential ability of Cd uptake in rice plant and then its translocation into polished rice was very high. Concentrations of copper and mercury absorbed in the rice plant were moderate for translocating into the polished rice, while the arsenic and lead in the plant were scarcely translocated into the polished rice. The distribution of heavy metals absorbed and translocated into aboveground parts of rice plant was appeared that there were remained at 63.3-93.4% in rice straw, 6.6-36.9% in unhulled rice, 0.6-5.7% in rice hulls, 3.2-31.3% in brown rice, 0.8-4.6% in rice bran and 1.1-26.7% in polished rice. The accumulation ratio of Cd in the aboveground parts of rice plant was remained at 26.7-31.3% in brown and polished rice.

Urban Climate Impact Assessment Reflecting Urban Planning Scenarios - Connecting Green Network Across the North and South in Seoul - (서울 도시계획 정책을 적용한 기후영향평가 - 남북녹지축 조성사업을 대상으로 -)

  • Kwon, Hyuk-Gi;Yang, Ho-Jin;Yi, Chaeyeon;Kim, Yeon-Hee;Choi, Young-Jean
    • Journal of Environmental Impact Assessment
    • /
    • v.24 no.2
    • /
    • pp.134-153
    • /
    • 2015
  • When making urban planning, it is important to understand climate effect caused by urban structural changes. Seoul city applies UPIS(Urban Plan Information System) which provides information on urban planning scenario. Technology for analyzing climate effect resulted from urban planning needs to developed by linking urban planning scenario provided by UPIS and climate analysis model, CAS(Climate Analysis Seoul). CAS develops for analyzing urban climate conditions to provide realistic information considering local air temperature and wind flows. Quantitative analyses conducted by CAS for the production, transportation, and stagnation of cold air, wind flow and thermal conditions by incorporating GIS analysis on land cover and elevation and meteorological analysis from MetPhoMod(Meteorology and atmospheric Photochemistry Meso-scale model). In order to reflect land cover and elevation of the latest information, CAS used to highly accurate raster data (1m) sourced from LiDAR survey and KOMPSAT-2(KOrea Multi-Purpose SATellite) satellite image(4m). For more realistic representation of land surface characteristic, DSM(Digital Surface Model) and DTM(Digital Terrain Model) data used as an input data for CFD(Computational Fluid Dynamics) model. Eight inflow directions considered to investigate the change of flow pattern, wind speed according to reconstruction and change of thermal environment by connecting green area formation. Also, MetPhoMod in CAS data used to consider realistic weather condition. The result show that wind corridors change due to reconstruction. As a whole surface temperature around target area decreases due to connecting green area formation. CFD model coupled with CAS is possible to evaluate the wind corridor and heat environment before/after reconstruction and connecting green area formation. In This study, analysis of climate impact before and after created the green area, which is part of 'Connecting green network across the north and south in Seoul' plan, one of the '2020 Seoul master plan'.

Improvement of Energy Efficiency of Plants Factory by Arranging Air Circulation Fan and Air Flow Control Based on CFD (CFD 기반의 순환 팬 배치 및 유속조절에 의한 식물공장의 에너지 효율 향상)

  • Moon, Seung-Mi;Kwon, Sook-Youn;Lim, Jae-Hyun
    • Journal of Internet Computing and Services
    • /
    • v.16 no.1
    • /
    • pp.57-65
    • /
    • 2015
  • As information technology fusion is accelerated, the researches to improve the quality and productivity of crops inside a plant factory actively progress. Advanced growth environment management technology that can provide thermal environment and air flow suited to the growth of crops and considering the characteristics inside a facility is necessary to maximize productivity inside a plant factory. Currently running plant factories are designed to rely on experience or personal judgment; hence, design and operation technology specific to plant factories are not established, inherently producing problems such as uneven crop production due to the deviation of temperature and air flow and additional increases in energy consumption after prolonged cultivation. The optimization process has to be set up in advance for the arrangement of air flow devices and operation technology using computational fluid dynamics (CFD) during the design stage of a facility for plant factories to resolve the problems. In this study, the optimum arrangement and air flow of air circulation fans were investigated to save energy while minimizing temperature deviation at each point inside a plant factory using CFD. The condition for simulation was categorized into a total of 12 types according to installation location, quantity, and air flow changes in air circulation fans. Also, the variables of boundary conditions for simulation were set in the same level. The analysis results for each case showed that an average temperature of 296.33K matching with a set temperature and average air flow velocity of 0.51m/s suiting plant growth were well-maintained under Case 4 condition wherein two sets of air circulation fans were installed at the upper part of plant cultivation beds. Further, control of air circulation fan set under Case D yielded the most excellent results from Case D-3 conditions wherein air velocity at the outlet was adjusted to 2.9m/s.

A Study on the Plant Planning in Landscape Space Considering the Characteristics of the Gender Determination of Pine Tree (소나무 성 결정 요인의 특성을 고려한 조경공간 식재계획)

  • Lee, Chang-Hun
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.38 no.1
    • /
    • pp.45-52
    • /
    • 2020
  • This study analyzed the components contained in the pine needles of first and second-year-olds to analyze the factors that the in vivo content of inorganic elements affects the sex determination of pine trees. In response, the plan for pine tree plant and maintenance was intended to be presented in consideration of the reproductive environment and physiological characteristics. The results are as follows. First, last year, when there were many encyclopedias, the analyzed N(%) content was found to be high. The nitrogen content of the previous year's soil was found to affect the production of the spheres the following year. This is believed to be possible to reduce the rate of Pine pollen produced in the new plant in the following year through a dispute over quality consumption in the spring of the previous year. Second, the weapons elements involved in the Pine cones and the generation of the Pine pollen in the new plant appeared to be P(%), K(%), Ca(%), and Fe(%). However, the nutrients from the previous year's leaves of Ca(%) and Fe(%) were found to have a low influence on the sex determination of first-year pine trees. Because Ca(%) and Fe(%) are not able to move nutrients accumulated in aging organs due to the nature of the components, feeding nutrients in the fall when the growth of the previous year's branches is reduced is expected to affect oral generation. Third, pine trees are extremely positive and Pine pollen is related to the time of the northeast wind. Therefore, it is believed that it would be good to be located in the northern direction, where the sunlight is good, in an outdoor space. In addition, it is important to use vaginal consumer products in spring and carry out a quarrel involving Mg and Fe during fall to reduce the effect of the Pine pollen, which is an outdoor plant. This is an important part of maintaining and managing pine trees in outdoor spaces as well as the sex determination of pine trees. This study suggested that plant planning, which derives the correlation between pine inorganic element content on sexual determination and takes into account the physiological characteristics of pine trees, is an important issue in the creation of outdoor space. Follow-up research on other factors affecting pine tree sex determination is expected.

Studies on the Behaviors of Urea in Soils [Part I]-Effects of some pesticides on the urea decomposition and nitrogen transformation in flooded paddy soil- (농경지(農耕地) 토양중(土壤中)에서 요소(尿素)의 동태(動態)에 관(關)한 연구(硏究) 제1보[第一報]-답토양(沓土壤)에서 농약제(農藥濟)가 효소(酵素)의 분해(分解) 및 전환(轉換)에 미치는 영향-)

  • Lim, Sun-Uk;Kang, Kyu-Young;Park, Sung-O
    • Applied Biological Chemistry
    • /
    • v.20 no.1
    • /
    • pp.58-65
    • /
    • 1977
  • A laboratory experiment was carried out with loamy paddy soily under Hooded condition to study the effects of some pesticides on the decomposition rate of urea and the transformation of nitrogen. The pesticides used in this study are ten kinds, which are usually applicable for rice cropping. The soil was treated with 200ppm of fertilizer urea-N and different levels of pesticides and then incubated at $28{\pm}1^{\circ}C$ for two weeks. The kinds of pesticides used in this study were three kinds of herbicides (2,4-D, Machete and TOK), three kinds of fungicides (Rabcide, Neo-asozine and Phenazine) at the levels of 20,100 and 200ppm and four kinds of insecticides (Birlane, Diazinon, Sumithion and Bux) at the levels of 50,250 and 500ppm. respectively. The results obtained may be summarized as follows. 1. The treatments of herbicides and fungicides show little effect on the decomposition rate of urea at the levels of 20 and 100ppm, but by the treatment of 200ppm it was retarded markedly after one day incubation aside from Rabcide and Neo-asozine. The decomposing rate of urea was inhibited weakly by the treatment with 250ppm of Sumithion and Bux, however, 500ppm of all kinds of insecticides treated in this study brought about strong inhibitory effect (over 50%) after only one day incubation. The applied urea was disappeared nearly completely in three days in all cases with and without pesticides. 2. The production of ammonium-N was increased with the increase of pesticide concentrations gradually through two weeks and otherwise in the control sample a loss of inorganic-N resulted in about 20% extent. 3. The inhibitory effect of the all applied pesticides on_the_ nitrification under flooded condition was observed markedly and may be ordered as insecticides, herbicides and fungicides according to its inhibiting action.

  • PDF

Anti-inflammatory Activity of Peel Extracts in Color-fleshed Potatoes (컬러감자외피 추출물의 항염활성)

  • Nam, Jung-Hwan;Jeong, Jin-Cheol;Kwon, Oh-Keun;Hong, Su-Young;Kim, Su-Jeong;Soh, Hwang-Bae;Lee, Jong-Nam;Lee, Kyung-Tea;Park, Hee-Jhun
    • Korean Journal of Plant Resources
    • /
    • v.26 no.5
    • /
    • pp.533-538
    • /
    • 2013
  • Potatoes were first introduced outside the Andes region four centuries ago, and have become an integral part of much of the world's food. Potatoes were first introduced into Europe in the 16th century and Korea in the early 19th century. In the nutritional aspects, potatoes contain abundant vitamins and minerals, as well as an assortment of phytochemicals such as carotenoids and natural phenols. Chlorogenic acid constitutes up to 90% of potato natural phenols. Due to the high content of potato functional compounds, it has known that potatoes are effective in the prevention of various human diseases. Recently, color-fleshed potatoes 'Hongyoung' and 'Jayoung' were developed by RDA, and it has reported that they have high content of anthocyanin. Additionally they show higher radical scavenging activity compared to white or yellow fleshed potatoes. So it will be expected that the consumption of color-fleshed potatoes grandually increase by pre-peeled potatoes and color potato chips. This study was conducted to enhance the peel of color-fleshed potatoes utilization and to determine the biological activity of peel of color-fleshed potatoes extract. The anti-inflammatory effects on ethanol extract and its solvent fraction were also evaluated. The anti-inflammatory activities of $CHCl_3$ fraction was evaluated for inhibitory activities against lipopolysacchride(LPS) induced nitric oxide(NO) and prostaglandin $E_2(PGE_2)$ production as well as inducible nitric oxide synthase(iNOS) and cyclo oxygenase-2(COX-2) protein expressions in RAW264.7 cell lines. The fraction inhibitory activity for both tests with $IC_{50}$ values showed in the ranges of $25{\sim}50{\mu}g/ml$. This result revealed that $CHCl_3$ fraction of Jayoung's peel is expected to be good candidate for development into source of anti-inflammatory agent.