• Journal of the Korean Institute of Gas
• /
• v.22 no.3
• /
• pp.74-83
• /
• 2018

Anyone who wants to install local ventilation system must obtain a permission from the Ministry of Employment and Labor even if he has permission from the Ministry of Environment. This is because not only the Atmospheric Environmental Protection Act, but also the manufacturing industry's hazardous risk prevention plan under Article 48 Clause 2 of the Industrial Safety and Health Act is to be submitted by 15 days before the construction. Under the current Environmental Protection Act, the Ministry of Environment regulates only the emission of pollutants from local exhaust ventilation systems into the atmosphere and the contents of workers' safety and health within industrial sites are managed by the Ministry of Employment and Labor. Even with the approval of the Ministry of Environment, the number of unsuccessful cases by the Ministry of Employment and Labor has increased, causing a growing discontent among the sites due to production delays and additional costs of improvement. In addition, local exhaust systems that are at greater risk of fire explosion have increased the risk of severe industrial accidents due to fire explosion. This is due to insufficient design of air volume, control speed, return speed, duct size, and risk of fire explosion. This is because the criteria and procedures for approval of local exhaust ventilation systems are similar, but the Industrial Safety and Health Act adds additional screening items for safety and safety of workers and fire and explosion. In this study, the Environment Ministry and the Employment and Labor Ministry seek to find a reasonable way to operate the system by comparing local exhaust ventilation system installation approval standards.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.5
• /
• pp.837-847
• /
• 2000

For the treatment of wastewaters generated from beer industry and petrochemical company with high organic and nitrogen contents, laboratory scale of A/O Pure-Oxygen Biofilm (POB) process was developed and studied by means of the comparative economic analysis with extended aeration process. When the wastewater of beer company was initially treated by the A/O POB process in the ranges of 70 to 150 mg TOC/L diluted with tap water, higher than 92% of TOC removal was accomplished in the all ranges. In case of petrochemical wastewater, the initial TOC removal was as low as 52%, though, it increased to 86% after 32 days of operation and also the TKN removal marked 71% after 27 days. Continuous high removal rates were monitored in both the TOC and TKN parameters during the experimental period. Due to the cost for PSA (Pressure Swing Adsorption) setting and biomass supporting media installation, the initial construction cost of A/O POB process was 2.9 times higher than that of extended aeration process. However, the advantages such as low sludge production, no need for sludge recycling and low energy consumption allow the A/O POB process to have 2.5 times lower operation and maintenance costs. Consequently, in the long term of operation, it is likely that A/O POB process would show higher performance as well as cost effectiveness compared to extended aeration process.

• Journal of the Economic Geographical Society of Korea
• /
• v.6 no.1
• /
• pp.45-60
• /
• 2003

As the process of economic globalization deepens market uncertainty and severe competition, modern companies are tend to rely on non-market, socio-economic mechanisms such as trust, collaboration, and interdependence, They are being more influenced by cultural economic mechanisms like networks, embeddedness, and placeness rather than explicit cost-reductions. This paper analyzes the characteristics of industrial clusters, the formation of social capital, and the process of institutionalization by comparing two distinctive types of clusters, say Teheran and East-Gate Valleys in Seoul, Korea. The one is mainly consisted of IT industries with increasing vertical integration supported by venture capitals and favorable business infrastructures. The other cluster has long been a traditional CBD frame of Seoul and has transformed to the most dynamic and productive area, characterized by one-stop 'R&D-production-distribution-consumption-after sales services'. The study of the developmental trajectory and key characteristics for these kinds of clusters can give us insight for the cluster theory. This paper firstly reviews the similarities and differences between the social capital in general and that of industrial clusters. It then profiles the growth of the two clusters over the past decade, and compares the current spatial and business structure of the two clusters, focusing on transactions costs, the creation and flow of information, and the local institutions. The paper concludes with some comments about the prospects and perils of the two types industrial clusters of Seoul.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.12
• /
• pp.1729-1735
• /
• 2015

This study was conducted to evaluate the effect of medicinal plant by-products (MPB) supplementation to a total mixed ration (TMR) on growth, carcass characteristics and economic efficacy in the late fattening period of Hanwoo steers. Twenty seven steers (body weight [BW], $573{\pm}57kg$) were assigned to 3 treatment groups so that each treatment based on BW contained 9 animals. All groups received ad libitum TMR throughout the feeding trial until slaughter (from 24 to 30 months of age) and treatments were as follows: control, 1,000 g/kg TMR; treatment 1 (T1), 970 g/kg TMR and 30 g/kg MPB; treatment 2 (T2), 950 g/kg TMR and 50 g/kg MPB. Initial and final BW were not different among treatments. Resultant data were analyzed using general linear models of SAS. Average daily gain and feed efficiency were higher (p<0.05) for T1 than control, but there was no difference between control and T2. Plasma albumin showed low-, intermediate- and high-level (p<0.05) for control, T1 and T2, whereas non-esterified fatty acid was high-, intermediate- and high-level (p<0.05) for control, T1 and T2, respectively. Carcass weight, carcass rate, backfat thickness and rib eye muscle area were not affected by MPB supplementation, whereas quality and yield grades were highest (p<0.05) for T1 and T2, respectively. Daily feed costs were decreased by 0.5% and 0.8% and carcass prices were increased by 18.1% and 7.6% for T1 and T2 compared to control, resulting from substituting TMR with 30 and 50 g/kg MPB, respectively. In conclusion, the substituting TMR by 30 g/kg MPB may be a potential feed supplement approach to improve economic efficacy in the late fattening period of Hanwoo steers.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.490-502
• /
• 2014

This study investigates the cultivation processes of major nuts and fruits such as Ginkgo biloba L., Vitis coignetiae, Actinidia arguta Planch, Rubus coreanus Miq., and Rubus crataegifolius and analyzes standard income in order to provide foundational data necessary to make reasonable policies related with the criteria of compensating the loss of forest products or diagnosis of forestry management. According to the research results, the types of cultivation by items can be largely divided into open field culture and mountainous culture. Regarding the average annual income per unit area (3.3) by items, the open field culture of Ginkgo biloba L. was 1,060 Won, mountainous culture of Ginkgo biloba L. was 618 Won, open field culture of Vitis coignetiae was 5,891 Won, mountainous culture of Actinidia arguta Planch was 8,113 Won, open field culture of Rubus coreanus Miq. was 14,701 Won, and open field culture of Rubus crataegifolius was 17,482 Won or so; thus, the average annual income of Rubus coreanus Miq. and Rubus crataegifolius was very higher than that of the other items. In particular, because the production of Rubus crataegifolius starts two years after the planting and they rely on family labor mainly for the cultivation, the expenses for employment and labor were analyzed to be low. In addition, the analysis shows that at most of the nuts and fruits cultivation, initial investment costs for facilities or seedlings occupy a great part as about 30% averagely out of the management cost, so it is thought that the government should provide proper support to vitalize the cultivation.

• Horticultural Science & Technology
• /
• v.35 no.4
• /
• pp.431-438
• /
• 2017

This study investigated the effect of pre-planting nitrogen (N) fertilization levels added to a soilless root medium on the growth of 'Dotaerang Dia' tomato seedlings. The N levels were varied for a total of 7 treatments: 0, 100, 250, 500, 750, 1,000, or $1,500mg{\cdot}L^{-1}$. The pH of the root media gradually rose in all treatments as the seedlings grew; however, the differences in the pH were not significant among the treatments. The electrical conductivity (EC) of the root media was significantly different among the treatments from sowing to week three, then drastically decreased after week four, which diminished the differences in the EC among the treatments. At week six, plant height, leaf length, leaf width, number of leaves, and fresh and dry weights of the shoot were highest for the treatment with $500mg{\cdot}L^{-1}N$. In contrast, the treatment with $1,500mg{\cdot}L^{-1}N$ had the lowest results for all growth measurements. The fresh weight was 67% heavier in the $500mg{\cdot}L^{-1}N$ treatment compared to the $1,500mg{\cdot}L^{-1}N$ treatment. The total N content in the tissues was lowest in the treatment with $0mg{\cdot}L^{-1}N$ and highest in the treatment with $1,000mg{\cdot}L^{-1}N$. The contents of calcium (Ca), magnesium (Mg), and metal micronutrients in the tissues were highest in the $250mg{\cdot}L^{-1}N$ treatment. A previous study demonstrated that adjusting the fertilization level to promote growth to over 90% of the maximum growth is a good strategy for lowering production costs and preventing damage due to excessive fertilizer absorption by crops. Our results indicated that the optimal pre-planting N fertilization level for tomato plug seedlings should be lower than $500mg{\cdot}L^{-1}$ and the optimum tissue N contents should be around 3.21% to 4.60%.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.459-467
• /
• 2014

The importance of fusion and association using established spatial information has increased gradually with the production and supply of various spatial data by public institutions. The generation of necessary spatial information without field investigation and additional surveying can reduce time, labor, and financial costs. However, the study of the integration of the newly introduced road name address map with the digital map is very insufficient. Even though the use of the road name address map is encouraged for public works related to spatial information, the digital map is still widely used because it is the national basic map. Therefore, in this study, building matching and update were performed to associate the digital map with the road name address map. After geometric calibration using the block-based ICP (Iterative Closest Point) method, multi-scale corresponding pair searching with hierarchical clustering was applied to detect the multi-type match. The accuracy assessment showed that the proposed method is more than 95% accurate and the matched building layer of the two maps is useful for the integrated application and fusion. In addition, the use of the road name address map, which carries the latest and most frequently renewed data, enables cost-effective updating of new buildings.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.6
• /
• pp.468-472
• /
• 2015

Background : Chinese matrimony vine (Lycium chinense Mill.) is a deciduous shrub belonging to the Solanaceae. The leaves are used as an alternative raw material replacing dried fruits associated with high production costs in many industires. The aim of this experiment was to determine the effect of drying temperature on the leaves used in the manufacture of functional products. Methods and Results : The leaves of Chinese matrimony vine were harvested when the plant height reached 60 - 70 cm in the spring and treated at four different temperatures ($40^{\circ}C$, $50^{\circ}C$, $60^{\circ}C$ and $70^{\circ}C$). The time to reach the desiccation state of 20% was 63 h at $40^{\circ}C$, 37 h at $50^{\circ}C$, 17 h at $60^{\circ}C$ and 11 h at $70^{\circ}C$. The drying rate per hour was 1.28% at $40^{\circ}C$, 2.25% at $50^{\circ}C$, 4.94% at $60^{\circ}C$ and 7.60% at $70^{\circ}C$. No significant difference were observed in ash, crude fat, polyphenol or rutin content of treated samples. Crude protein and betaine content decreased with higher dry temperatures. Nitrogen free extract of the treated samples increased with higher drying temperatures. Conclusions : Taking into consideration drying time, drying rate, color value, energy consumption and functional ingredients is advantageous to dry the leaves of the Chinese matrimony vine at $60^{\circ}C$ using a hot air agricultural dryer.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1620-1620
• /
• 2001

Forages, both grazed and conserved, provide the basis of ruminant production systems throughout the world. More than 90 per cent of the feed energy consumed by herbivorous animals world - wide were provided by forages. With such world - wide dependence on forages, the economic and nutritional necessity of been able to characterize them in a meaningful way is vital. The characterization of forages for productive animals is becoming important for several reasons. Relative to conventional laboratory procedures, Near Infrared Reflectance Spectroscopy (NIRS) offers advantages of simplicity, speed, reduced chemical waste, and more cost-effective prediction of product functionality. NIR spectroscopy represents a radical departure from conventional analytical methods, in that entire sample of forage is characterized in terms of its absorption properties in the near infrared region, rather than separate subsamples being treated with various chemicals to isolate specific components. This forces the analyst to abandon his/her traditional narrow focus on the sample (one analyte at a time) and to take a broader view of the relationship between components within the sample and between the sample and the population from which it comes. forage is usually analysed by NIRS in dry and ground presentation. Initial success of NIRS analysis of coarse forages suggest a need to better understand the potential for analysis of minimally processed samples. Preparation costs and possible compositional alterations could be reduced by samples presented to the instrument in undried and unground conditions. NIRS has gained widespread acceptance for the analysis of forage quality constituents on dry material, however little attention has been given to the use of NIRS for chemical determinations on undried and unground forages. Relatively few works reported the use of NIRS to determine quality parameters on undried materials, most of them on both grass and corn silage. Only two works have been found on the determination of quality parameters on fresh forages. The objectives of this paper were (1) to evaluate the use of NIRS for determination of nitrogen and moisture on undried and unground forage samples and (2) to explore two mathematical treatments and two NIR regions to predict chemical parameters on fresh forage. Four hundred forage samples (n: 400) were analysed in a NIRS 6500 instrument (NIR Systems, PA, USA) in reflectance mode. Two mathematical treatments were applied: 1,4,4,1 and 2,5,5,2. Predictive equations were developed using modified partial least squares (MPLS) with internal cross - validation. Coefficient of determination in calibration (${R^2}_{CAL}$) and standard error in cross-validation (SECV) for moisture were 0.92 (12.4) and 0.92 (12.4) for 1,4,4,1 and 2,5,5,2 respectively, on g $kg^{-1}$ dry weight. For crude protein NIRS calibration statistics yield a (${R^2}_{CAL}$) and (SECV) of 0.85 (19.8) and 0.85 (19.6) for 1,4,4,1 and 2,5,5,2 respectively, on a dry weight. It was concluded that NIRS is a suitable method to predict moisture and nitrogen on fresh forage without samples preparation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.532-542
• /
• 2020

Due to abnormal weather conditions such as high temperature, the management of greenhouse rose farms is getting worse. In order to enhance the competitiveness of these farms, new measures are needed to improve their management performance. Therefore, this study suggests alternatives to improve the efficiency and productivity by identifying the causes of inefficiency of greenhouse rose farms in terms of management performance analysis through DEA analysis and MPI analysis. As a result of DEA analysis, the average TE of farmers increased from 0.867('16) to 0.905('17), but decreased to 0.850 in 2018, indicating that it was inefficient. In order to increase the management efficiency of farmers, efforts to preferentially reduce the costs (equipment, employment labor, fertilizer, facilities, seeds) that cause inefficiencies are needed. As a result of MPI analysis, TECI decreased from 1.044(T2) to 0.939(T3), which was the cause of the MPI decrease, and the TCI was rather increased from 0.958(T2) to 0.969(T3). In other words, it means that the decrease in productivity is due to insufficient utilization of potential production technology rather than the slowing of technological progress. This implies that it is important to provide technical guidance on utilization after technology dissemination.