• 대한예방한의학회지
• /
• 제6권1호
• /
• pp.36-50
• /
• 2002

Health industry, a knowledge based high value-added industry, is being considered as a strategic area for the 21C and many advanced countries are making every endeavors for the promotion of health industry along with information technology, new materials, and mechatronics. Korean health industry, however, has been excluded from the governmental supports as well as bound by strict regulation so far, and there is a significant gap in technology compared with advanced countries. In 21C, technology is the main factor of national competitiveness and that is why the role of R&D institutes are so important in the high level of competition to cope with the technology protection policies of advanced countries. In this article, with Directory of Korean R&D Institutes published by Korea Industry Technology Association, I reviewed the trends of R&D institute of health industry. Main findings of the research can be summarized as follows. The portion of health industry R&D institute is 3.6% of total R&D institute but the amount of R&D investment is over than 5% This means health industry are knowledge based and R&D intensified industry, meanwhile the variations of same industry R&D institutes of health industry is huge in R&D investments and other activities. Regional distributions of health industry institutes show some kind of different patterns in each industry areas. Medical devices and Medical informatics's preference of metropolitan region are distinguished with other industry areas. Many of the institutes are located in same site of it's company rather than operating separate building for R&D specific uses. It is better for transforming ideas to products and close cooperation of research body with product lines, but it is a handicap for networking and communicating with other research institutions too. It takes 18.4yrs for bearing R&D institute on the average. For a long times 'copy products' or 'me too products' policies were easy way to maintain business entities. But recently, it is recognized that research activities are essential component of sustaining it's own business firms. This means technology itself is leading power of corporation itself in the high level of competition.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.177-186
• /
• 2015

Until Mandelbrot introduced the concept of fractal geometry and fractal dimension in early 1970s, it has been generally considered that the geometry of nature should be too complex and irregular to describe analytically or mathematically. Here fractal dimension indicates a non-integer number such as 0.5, 1.5, or 2.5 instead of only integers used in the traditional Euclidean geometry, i.e., 0 for point, 1 for line, 2 for area, and 3 for volume. Since his pioneering work on fractal geometry, the geometry of nature has been found fractal. Mandelbrot introduced the concept of fractal geometry. For example, fractal geometry has been found in mountains, coastlines, clouds, lightning, earthquakes, turbulence, trees and plants. Even human organs are found to be fractal. This suggests that the fractal geometry should be the law for Nature rather than the exception. Fractal geometry has a hierarchical structure consisting of the elements having the same shape, but the different sizes from the largest to the smallest. Thus, fractal geometry can be characterized by the similarity and hierarchical structure. A process requires driving energy to proceed. Otherwise, the process would stop. A hierarchical structure is considered ideal to generate such driving force. This explains why natural process or phenomena such as lightning, thunderstorm, earth quakes, and turbulence has fractal geometry. It would not be surprising to find that even the human organs such as the brain, the lung, and the circulatory system have fractal geometry. Until now, a normal frequency distribution (or Gaussian frequency distribution) has been commonly used to describe frequencies of an object. However, a log-normal frequency distribution has been most frequently found in natural phenomena and chemical processes such as corrosion and coagulation. It can be mathematically shown that if an object has a log-normal frequency distribution, it has fractal geometry. In other words, these two go hand in hand. Lastly, applying fractal principles is discussed, focusing on pulp and paper industry. The principles should be applicable to characterizing surface roughness, particle size distributions, and formation. They should be also applicable to wet-end chemistry for ideal mixing, felt and fabric design for papermaking process, dewatering, drying, creping, and post-converting such as laminating, embossing, and printing.

• 대한미생물학회지
• /
• 제21권3호
• /
• pp.345-353
• /
• 1986

Authors studies on the isolation of non-sucrose fermentation Vibrio species such as V. parahaemolyticus, V. vulnificus and V. damsela from sea water, shellfishes and various algae at Ulleung island in the east of Korea on summer in 1985. Authors carried out test for isolated strains to biochemical characteristics, halophilism, hemolysis and serological reaction. The results obtained were as follows: 1. Strains isolated from total specimens were 25 strains of V. parahaemolyticus, 2 strains of V. vulnificus and 1 strain of V. damsela, respectively. 2. Isolated frequency of Vibrio species from sea water and marine products was lower than on specimens in the southern sea of Korea from 1980 to 1985. 3. On hemolysis reaction on blood agar media using human and rabbit erythrocytes, 14 strains among 25 strains of V. parahaemolyticus isolated were positive, and V. vulnificus and V. damsela were positive, respectively. 4. The distributions of serotypes of V. parahaemolyticus isolated were from O1 group to O10 group, and from K 10 to K 69. The results of K serotypes were as follows ; serotype K 10 and K 33 were 2 strains, serotype K 59 and K 69 were 1 strain, respectively. And 2 strains of V. vulnificus isolated were not agglutinated by antiserum of V. vulnificus. Therefore, the probability is that 2 strains of V. vulnificus isolated were other serotypes distributed on sea weater and marine products of Ulleung island of Korea.

• 한국식품영양학회지
• /
• 제25권2호
• /
• pp.330-337
• /
• 2012

The aim of this study was to evaluate the status of consumption and consumer satisfaction of dietary fiber supplements. The survey was conducted using a self-recorded questionnaire developed to meet the purpose of this study. The characteristics of the subjects who have taken dietary fiber supplements in the past are as follows: distributions of socioeconomic variables showed that the highest-ranked group(the group that reported the highest consumption of dietary fiber supplements) was professionals with a college degree or higher degree. In addition, the highest-ranked group were the most healthy, nonsmokers and reported drinking habits of '1~2 times/week'. Regarding the health status of those surveyed, digestive disease and constipation were the most common complaints. The majority responded with 'health concerns' to the question that asked the reason for their purchase of the dietary fiber supplements. Three major places respondents could find dietary fiber supplements were 'through the internet', 'the market', 'the pharmacy' in descending order. The compositions of dietary fiber products varied. 'konjac', 'cellulose', 'psyllium husks' were the most popular components consumed by the subjects. The average duration of product consumption was less than one month. In terms of satisfaction levels(satisfaction was ranked from 1 to 5), 'taste' and 'type' scored the highest in satisfaction levels while 'price' ranked the lowest. When subjects were asked about self-awareness regarding the physiological efficacy of dietary fiber supplements, the responses were positive in 'bowel movement' and 'weight loss'. Further research is required to improve the quality of dietary fiber supplements in order to assist consumers in selecting the appropriate products.

• 한국발생생물학회지:발생과생식
• /
• 제14권4호
• /
• pp.261-268
• /
• 2010

As in the O. mykiss electrophoretic profiles of RNA, the signals of each RNA sample from 9 individual tissues such as liver, muscle, brain, heart, pituitary gland, kidney, intestine, spleen and gill similar to positive control were obtained. The tissue distributions of the complimentary DNA (cDNA) of O. mykiss four genes were analyzed using quantitative real-time PCR with primer sets for tissue expression analysis. In this rainbow trout species, author obtained bands of various sizes, ranged from 700 bp to 1,400 bp. A dissociation curve was made at the end of each run to make sure that there was no non-specific amplification. Supplementarily, the Ct of each DNA was compared. The Ct values of vinculin with rainbow trout tissues were determined in a manner similar to those for agouti-related protein (AgRP) and melanocortin receptors (MC4R I and MC4R II). Further, obtained Cts for standard curve of each DNA were affected by specific product (vinculin, AgRP and MC4R II genes). After several experiments with four individual genes of rainbow trout, author estimated a variation ratio of the mean Ct value of the DNA extracted using the comparative CTt method was 37.27, and the standard deviation was 5.33. The correlation coefficient between the Ct values and the concentration of cDNA was -0.98, -0.99, -0.91 and -0.86, respectively (vinculin, AgRP, MC4R I and MC4R II genes). Since this correlation showed high linearity, the straight line obtained was used as a standard for the O. mykiss tissues reared in aquarium. A PCR efficiency of 100% is ideally achieved when the slopes are close to the theoretical value of -3.31. According to quantification method, the results of quantification are strongly affected by the DNA fragmentation. The size of most DNA fragments obtained from various tissues of rainbow trout used in the experiment was approximately 100 bp. According to the four slopes, an efficiency of nearly 100% was estimated for four genes detection methods. Additionally, further analysis with more individuals and primers will be required to fully establish optimization in rainbow trout.

• Carbon letters
• /
• 제28권
• /
• pp.38-46
• /
• 2018

Modified pitch A (MPA) and modified pitch B (MPB) were prepared by oxidative polymerization and thermal polycondensation reaction with refined pitch as the raw material, respectively. The toluene soluble components (TS-1 and TS-2) were obtained by solvent extraction from MPA and MPB, separately. The Flynn-Wall-Ozawa method and Kissinger-Akahira-Sunose method were used to calculate the pyrolysis activation energy of TS. The Satava-Sestak method was used to investigate the pyrolysis kinetic parameters of TS. Moreover, the optical microstructure of the thermal conversion products (TS-1-P and TS-2-P) by calcination shows that TS-1-P has more contents of mosaic structure and lower contents of fine fiber structure than TS-2-P. The research result obtained by a combination of X-ray diffraction and the curve-fitting method revealed that the ratios of ordered carbon crystallite (Ig) in TS-1-P and TS-2-P were 0.3793 and 0.4417, respectively. The distributions of carbon crystallite on TS-1-P and TS-2-P were calculated by Raman spectrum and curve-fitting analysis. They show that the thermal conversion product of TS-2 has a better graphite crystallite structure than TS-1.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권8호
• /
• pp.1079-1084
• /
• 2006

To determine whether a link exists between reproductive seasonality and the structure of the melatonin receptor 1A (MTNR1A) gene, the latter was studied in nonseasonal estrous breeds (Small Tail Han and Hu ewes) and seasonal estrous breeds (Dorset, Suffolk and German Mutton Merino ewes). A large fragment of the exon 2 of the MTNR1A gene was amplified and a uniform fragment of 824 bp was obtained in 239 ewes of five breeds. The 824 bp PCR product was digested with restriction endonucleases Mnl I and Rsa I, and checked for the presence of restriction sites. The presence (allele M) or absence (allele m) of an Mnl I site at base position 605 led to three genotypes MM (236 bp/236 bp), Mm (236 bp/303 bp) and mm (303 bp/303 bp) in five sheep breeds. The presence (allele R) or absence (allele r) of a Rsa I site at base position 604 led to three genotypes RR (267 bp/267 bp), Rr (267 bp/290 bp) and rr (290 bp/290 bp) in five sheep breeds. Frequencies of MM and RR genotypes were obviously higher, and frequencies of mm and rr genotypes were obviously lower in nonseasonal estrous sheep breeds than in seasonal estrous sheep breeds. Sequencing revealed four mutations (G453T, G612A, G706A, C891T) in mm genotype compared to MM genotype and one mutation (C606T) in rr genotype compared to RR genotype. For polymorphic Mnl I and Rsa I cleavage sites, the differences of genotype distributions were very highly significant (p<0.01) between Small Tail Han ewes and seasonal estrous sheep breeds. In each group, no significant difference (p>0.05) was detected. These results preliminarily showed an association between MM, RR genotypes and nonseasonal estrus in ewes and an association between mm, rr genotypes and seasonal estrus in ewes.

• 동아시아식생활학회지
• /
• 제23권2호
• /
• pp.153-170
• /
• 2013

This study examined awareness and information acquisition behavior regarding food hygiene and safety of university students to improve safe dietary practices and to get basic information to develop educational materials for food safety. It was conducted among 276 university students of Qingdao University and Liaocheng University in Shandong province, China through a self-administered questionnaire. Data were analyzed by SPSS Windows V.19.0. To describe characteristics of the respondents, frequency distributions were used. In addition, t test, one-way analysis of variance and Duncan's multiple range tests were conducted. The results were as follows: The respondents were generally interested in food hygiene and safety. However, the level of awareness regarding the food hygiene and safety system in China was not high. Almost forty-five percent of the respondents did not think that foods produced and distributed in China were safe. For the reasons for their distrust, most of the students replied that they did not trust the safety 'because of distrust for hygiene of the food process', followed by 'because of distrust for food distribution' and 'because of excess or illegal use of food additives on food process'. The respondents answered for the concern level toward food hygiene and safety foodborne disease threatened food safety the most, followed by heavy metal contamination and endocrine disruptors. The respondents acquired most information from electronic media including TV and radio. Most of the students wanted to participate in food hygiene and safety education. Finally, when they found hazardous or foreign materials in food the most frequent reaction was 'paying attention in the next purchase', followed by 'notifying others', and 'letting it go this time but never buying that product in the future'.

• 공업화학
• /
• 제17권6호
• /
• pp.638-643
• /
• 2006

과잉수소 반응조건하에서 dichloromethane ($CH_{2}Cl_{2}$)의 열분해 생성물질의 반응경로를 규명하기 위해서 등온 관형반응기를 이용하여 무산소, 1 atm, 반응온도 $525{\sim}900^{\circ}C$, 반응시간 0.3~2.0 sec에서 반응을 수행하였다. $CH_{2}Cl_{2}$ : $H_{2}$ mole 비는 전 실험에서 4 : 96으로 유지하였으며 반응물 $CH_{2}Cl_{2}$ 분해 및 생성물의 농도는 on-line GC를 이용하여 정량 분석하였으며, 미량의 미지 화합물은 batch 시료로써 GC/MS로 정성 분석하였다. 반응시간 1 sec를 기준으로 반응물 $CH_{2}Cl_{2}$는 $600^{\circ}C$ 부근에서 분해가 시작되어 $780^{\circ}C$에서 99% 이상 분해되었다. 반응 주요생성물은 $CH_{3}Cl$, $CH_{4}$, $C_{2}H_{4}$, $C_{2}H_{6}$, HCl이 생성되었으며, 미량 생성물로는 $CHClCCl_{2}$, CHClCHCl, $CH_{2}CHCl$, $C_{2}H_{2}$가 생성되었다. 본 연구에서는 반응물질 분해 및 중간생성물 분포 특성과 열역학 및 반응속도 원리를 근거로 주요 생성물질 반응경로를 제시하였으며, 그 결과는 $CH_{2}Cl_{2}$ 및 유사한 염화탄화수소 화합물 열분해시 일어날 수 있는 열분해공정 이해를 위한 자료로 이용된다.

• Animal cells and systems
• /
• 제1권2호
• /
• pp.351-354
• /
• 1997

The distributions of G to A substitution ($G^{-75}{\rightarrow}A$) mutation in the human apolipoprotein A1 (APOAI) gene promoter region and glutathione S-tran-sferase Mu1 (GSTM1) gene deletion were examined in subjects with Korean population. The $G^{-75}{\rightarrow}A$ mutation of APOA1 was genotyped by the polymerase chain reaction (PCR) and subsequent digestion of the PCR product using either Mspl or Mval (n=206). The observed numbers of GG, GA and AA genotypes were 132, 63 and 11, respectively. The allele frequencies of G and A were 0.794 and 0.206, respectively. The GSTM1 gene deletion was simply examined by the PCR amplification (n=106). The observed numbers of null type ($GSTM1^*0/GSTM1^*0$) and positive type were 55 and 51, respectively. The allele frequency of $GSTM1^*0$ was 0.720.