• 공업화학
• /
• 제9권4호
• /
• pp.523-528
• /
• 1998

본 연구에서는 고체전해질셀 내에서 작업전극으로 사용된 $V_2O_5$의 전기화학적 특성을 알아보기 위해 YSZ를 고체전해질로 사용하여 전기화학셀(1-Butene+$O_2$, $V_2O_5{\mid}YSZ{\mid}Ag$, $O_2$)을 구성하였다. 상대전극인 Ag는 소성에 따라 sintering이 일어나고 $3{\mu}m$ 이상의 기공을 갖는 구조를 얻었다. 작업전극은 소성조건에 따라 부분산화반응에 영향을 주는 (010)면이 발생되었다. $V_2O_5$의 1-부텐에 대한 주요생성물은 부타디엔이었고 SEP (solid electrolyte potentiometry) 기술을 이용하여 작업전극상에 흡착된 화학종의 화학포텐셜을 측정하였다. 가스조성에 따른 개로전위 (OCV; open circuit voltage)를 측정하여 표면 산소종에 혼합전위의 발생을 확인하였다.

• 한국화재소방학회논문지
• /
• 제19권3호
• /
• pp.58-63
• /
• 2005

등유 풀화재의 화염과 연소에 의해 생성되는 연기의 특성에 대해서 조사하였다. 다양한 발열량을 위해 직경을 변하게 할 수 있는 팬버너를 제작하였다. 풀화재를 조사하기 위해 화염 높이와 떨림 주파수를 분석하였다. 실험적으로 풀화염 높이는 이론적 상관관계 증가율과 잘 일치하지만, 정량적으로는 등유의 연소율에 기인하여 과대 평가된 값을 보인다. 연기의 특성을 조사하기 위해 세 가지의 실험방법을 사용하였다. 먼저 가스분석기를 이용하여 연소시 발생되는 주요 가스 농도를 측정하였는데 이산화탄소의 생성과 산소의 소모율은 풀화염의 열방출율에 비례하지만, 일산화탄소의 발생에 대한 경향성은 발견할 수 없었다. 연기의 매연입자를 광감쇄법과 TEM 이미지를 이용하여 특성을 조사하였다 연기밀도는 발열량의 증가에 따라 매우 급격히 증가하였고, 등유 풀화염에서 발생한 매연입자들은 자연적인 연소조건임에도 불구하고 역확산 제트화염에서 생성된 매연과 유사한 형태와 탄화정도를 보임이 관찰되었다.

• 한국수소및신에너지학회논문집
• /
• 제13권2호
• /
• pp.101-109
• /
• 2002

This work was focused on the thermal decomposition of methane into hydrogen and carbon black without emitting carbon dioxide. Extensive experimental investigation on the thermal decomposition of methane has been carried out using a continuous flow reaction system with tubular reactor. The experiments were conducted at the atmospheric pressure condition in the wide range of temperature ($950-1150^{\circ}C$) and flow rate (250 - 1500 ml/min) in order to study their dependency on hydrogen yield. During the experiments the carbon black was successfully recovered as an useful product. Undesirable pyrocarbon was also formed as solid film, which was deposited on the inside surface of tubular reactor. The film of pyrocarbon in the reactor wall became thicker and thicker, finally blocking the reactor. The design of an efficient reactor which can effectively suppress the formation of pyrocarbon was thought to be one of the most important subjects in the thermal cracking of methane.

• 전기화학회지
• /
• 제8권1호
• /
• pp.12-16
• /
• 2005

디젤은 높은 volumetric density$[VD,\;kg\;H_2/m^3]\;(>100)$와 gravimetric density$(GD,\;\%\;H_2)\;(>17)$를 가지는 우수한 수소저장매체 중의 하나이다. (Liquid Hydrogen의 경우 VD와 GD가 각각 50, 18 정도) 본 연구는 이러한 디젤연료의 개질에 적합한 촉매선정 및 반응특성에 관한 연구를 실시하였다 촉매는 자체 선정한 3가지 촉매(NECS-1, NECS-2, NECS-3)와 2가지 상용촉매(FCR-HCl4, FCR-HC35. Sud-Chemie, Inc)에 대하여 조사하였다. 실험결과 NECS-1이 디젤개질에 가장 적합한 것으로 판단되었다. 이와 함께 촉매 층의 길이에 따른 온도 및 농도를 분석하였으며, 디젤개질을 위한 연료의 delivery 문제로 인한 촉매 층 내의 급격한 온도 변화특성을 확인할 수 있었다. 또한 촉매 층 상단부에서 발생한 발열량을 하단부의 흡열부에 효과적으로 전달하는 것이 ATR(Autothermal Reforming) 반응 특성에 깊게 연관되어 있음을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1794-1796
• /
• 1998

In this study, the $SO_2$ addition effect on NOx removal has been conducted from a combustion flue gases by the do corona discharge-activated radical shower systems. The simulated flue gases were consisted of NO-O_2-$N_2$, NO-$CO_2-N_2-O_2$ and $NO-SO_2-CO_2-Na-O_2$([NO]o:200ppm and $[SO_2]o$:800ppm). The injection gases used as radical source gases were $NH_3$-Ar-air. $SO_2$ and NOx removal efficiency and the other by-products were measured by Fourier Transform Infrared(FTIR) as well as $SO_2$. NOx and $NO_2$ gas detectors. By-product aerosol particles were also observed by Condensation Nucleation Particle Counter(CNPC) and SEM images after sampling. The results showed that asignificant aerosol Particle formation was observed during a removal operation in corona radical shower systems. The NOx removal efficiency significantly increased with increasing applied voltage and $NH_3$ molecule ratio. The $SO_2$ removal efficiency was not significantly effected by applied voltage and slightly increased with increasing $NH_3$ molecule ratio. The NOx removal efficiency for NO-$SO_2-CO_2-N_2-O_2$ was better than that for NO-$CO_2-N_2-O_2$.

• 산업경영시스템학회지
• /
• 제43권1호
• /
• pp.26-33
• /
• 2020

The plastic waste problem is deepening all over the world. Plastic wastes have serious impacts on our lives as well as environ- mental pollution. The production and use of plastics increases every year, but once they are produced, they usually roam the earth for hundreds or thousands of years to pollute the environment. Although there is growing interest in plastic issues around the world and environmental regulations are being tightened, but no clear solution has yet been found. This study suggests Environmental degradation index (EDI). EDI can help raise consumers' attention to plastic wastes. In addition, EDI will contribute to reduce them in the future. As far as we know, this is the first study. We developed EDI for the confectionery packaging. This study defines four factors that may affect the environment of confectionery packaging: greenhouse gas emissions, energy consumption, methane emissions, and packaging space ratio. Then we quantify the value of each element and compute EDI as the sum of the four component values. In order to evaluate the feasibility of EDI proposed in this study, confectionery-packaging materials distributed in Korea were collected and analyzed. First, the types of confectionery are classified into pies, biscuits, and snacks and basic data was collected. Then the values of the four components were calculated using existing research data on the environment. We can use the proposed EDI to determine how much a product packing affects the environment.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3387-3390
• /
• 2013

Catalytic gasification of mandarin waste residue was carried out using direct and indirect catalyst-contact methods for the first time. In the indirect method, non-catalytic reaction in a reactor was followed by catalytic upgrading of vapor product in another reactor. Two different catalysts, $Ni/{\gamma}-Al_2O_3$ and $Ni/CeO_2-ZrO_2$, were employed. $CeO_2-ZrO_2$ support was prepared using hydrothermal synthesis in supercritical water. The catalysts were characterized by $H_2$-temperature programmed reduction and Brunauer-Emmett-Teller analyses. Under the condition of equivalent ratio (ER) = 0, the indirect catalyst-contact method led to a higher gas yield than the direct method. Under ER = 0.2, the yield of biogas obtained over $Ni/CeO_2-ZrO_2$ was higher than that obtained over $Ni/{\gamma}-Al_2O_3$. Also, the coke formation of $Ni/CeO_2-ZrO_2$ was lower than that of $Ni/{\gamma}-Al_2O_3$. Such results were attributed to the higher reducibility and better lattice oxygen mobility of $Ni/CeO_2-ZrO_2$, which were advantageous for partial oxidation reaction.

• Nuclear Engineering and Technology
• /
• 제46권2호
• /
• pp.147-158
• /
• 2014

In order to investigate how the microstructure of fuel/matrix-interaction (FMI) layers change during irradiation, different U-7Mo dispersion fuel plates have been irradiated to high fission density and then characterized using scanning electron microscopy (SEM). Specifially, samples from irradiated U-7Mo dispersion fuel elements with pure Al, Al-2Si and AA4043 (~4.5 wt.%Si) matrices were SEM characterized using polished samples and samples that were prepared with a focused ion beam (FIB). Features not observable for the polished samples could be captured in SEM images taken of the FIB samples. For the Al matrix sample, a relatively large FMI layer develops, with enrichment of Xe at the FMI layer/Al matrix interface and evidence of debonding. Overall, a significant penetration of Si from the FMI layer into the U-7Mo fuel was observed for samples with Si in the Al matrix, which resulted in a change of the size (larger) and shape (round) of the fission gas bubbles. Additionally, solid fission product phases were observed to nucleate and grow within these bubbles. These changes in the localized regions of the microstructure of the U-7Mo may contribute to changes observed in the macroscopic swelling of fuel plates with Al-Si matrices.

• 한국재료학회지
• /
• 제12권3호
• /
• pp.176-181
• /
• 2002

Fabrication of ${\beta}-FeSi_2$ was attempted by making use of the combined process of mechanical alloying (MA) and spark plasma sintering (SPS). MA was performed under the Ar gas atmosphere using mixed powders of pure iron and silicon having the mole fraction of 1:2. SPS process was performed at 800-85$0^{\circ}C$ with the applied pressure of 50MPa and the holding time was ranging from 0 to 30min. The mechanically alloyed powder by cyclic operation of rotor for 15hrs consisted of $\varepsilon$-FeSi and Si phases. When this mechanically alloyed powder was sintered by SPS process above 85$0^{\circ}C$, $\varepsilon$-FeSi and ${\alpha}-Fe_2Si_5$ phase were formed. Bulk product sintered at 82$0^{\circ}C$ for 30min consisted of ${beta}-FeSi_2$ phase with a small fraction of $\varepsilon$-FeSi and the density of sintered specimen was 75.3% theoretical density. It was considered that the MA/SPS combined process was effective for the preparation of ${\beta}-FeSi_2$ without heat treatment process after sintering.

• Archives of Pharmacal Research
• /
• 제29권10호
• /
• pp.840-844
• /
• 2006

For the exploration of pharmacophoric moiety of malloapelta B (1) possessing the inhibitory activity of $NF-{\kappa}B$ activation, structural variation of ${\alpha},{\beta}-unsaturated$ carbonyl motif was attempted. 1 was reduced by catalytic hydrogenation, sodium borohydride, and lithium aluminumhydride. Catalytic hydrogenation with 30 psi or 15 psi of $H_2$ gas of 1 generated 8-butyl-5,7-dimethoxy-2,2-dimethylchroman (2) and 1-(5,7-dimethoxy-2,2-dimethylchroman-8-yl)butan-1-one (3), respectively. Reduction with sodium borohydride occurred at the double bond of ${\alpha},{\beta}-unsaturated$ ketone of 1 to give 1-(5,7-dimethoxy-2,2-dimethyl-2H-chromen-8-yl)butan-1-one (4). Reduction of 1 with lithium aluminumhydride and then quenched with methanol and water produced unexpected products, 1-(5,7-dimethoxy-2,2-dimethyl-2H-chromen-8-yl)-3-methoxy-1-butene (5) and 1-(5,7-dimethoxy-2,2-dimethyl-2H-chromen-8-yl)-3-hydroxy-1-butene (6). These are formed from the isomerization of initial product 9 through the continuous conjugate carbocation intermediate 11. Addition of ethylmagnesium bromide and dimethyl malonate anion to 1 gave the conjugate adducts 7 and 8. Ethylmagesium bromide and sodium borohydride reduction unusually gave the conjugate addition due to steric congestion around carbonyl group of 1. Compound 2 exhibits the reduced inhibitory activity against $NF-{\kappa}B$ activation and the others do not show the activity. Therefore ${\alpha},{\beta}-unsaturated$ carbonyl group of 1 should be important for its inhibitory activity.