• 한국생활과학회지
• /
• 제20권6호
• /
• pp.1153-1165
• /
• 2011

Decision making for gas boiler consumers depends on the characteristics of products such as the price and quality as well as the brand image. Although a gas boiler is a high involvement product in terms of price, in fact, it is a low involvement product which is greatly affected by installers. This study examined variables which affect the level of satisfaction and repurchase intention by surveying about 1,000 housewives through an on-line questionnaire. The results were as follows: first, gas boiler users' general knowledge of gas boilers showed a correct-answer rate of 54.5%. The average satisfaction score of product quality (mean=5.61 out of 7) was higher than that of the satisfactionscore of the company's service (mean=5.46). Second, the level of repurchase intention was above the mid-point (mean=4.72). Multivariate regression found that product satisfaction, service satisfaction, household size, and information sources explained repurchase intentions for gas boilers to be about 50.7%. Gas boiler marketers should pay attention to the survey result in that the level of repurchase intention depends mainly on both consumer satisfaction and information sources.

• 한국안전학회지
• /
• 제7권3호
• /
• pp.35-42
• /
• 1992

Ignition energy effects of concentration of mixed gas In closed cylindrical vessel(1, 832㎤) are studied. The ignition energy ranged from 25 Joule to 110 Joule, and hidrogen and methane gases were used for flammable gas at stoichiometric condition with oxygen gas and nitrogen gas (N2) was for inert gas, which concentration was maximum 60% . The explosion pressure, temperature, concentration of product gases were calculated. It is found that - The explosion pressure and explosion velocity increase with ignition energy. - The gradience of explosion velocity with ignition energy is steeper than explosion pressure. - The results of calculation are similiar with results of experiment. - NOx is not serious product gas for methane and hydrogen gas, but CO is serious at certain concentration for methane in asphyxiation.

• 한국가스학회지
• /
• 제10권3호
• /
• pp.60-64
• /
• 2006

카본블랙 제조공정에서 발생되는 부생가스의 폭발한계와 폭발특성을 연구하였다. 부생 가스의 75% 가량은 수분과 질소였으며 가연성 성분으로는 수소를 비롯한 메탄, 아세틸렌, 일산화탄소 등을 포함하고 있어 연료로 활용하고 있다. 부생 가스중의 가연성 가스 성분들에 의해 공정상에 폭발 및 연소의 위험이 있다. 실험결과 얻어진 폭발한계범위는 17.1%에서 70.7%였으며 르샤틀리에 법칙을 이용하여 예측한 값과는 상당한 차이가 있었다. 또한 폭발특성 실험 결과 폭발압력은 최대 $5.4kg/cm^2$이었고 평균 폭발압력 상승속도는 $39.2kg/cm^2/s$였다. 이러한 결과들은 부생 가스의 취급 및 이용에 따른 폭발이나 화재 사고시 공정과 시설 등에 치명적인 손상을 입힐 수 있으므로 가스폭발 방지 및 방호조치가 필요하다.

• 한국식품영양과학회지
• /
• 제28권5호
• /
• pp.997-1002
• /
• 1999

The aim of the present study was to investigate effects of food preservative addition and changes in composition of herb extract product on the growth of spoilage yeast, Zygosaccharomyces sp. Herbs such as Panax ginseng, Cinnamomum cassia, Lycium chinense, Zyzyphus juiuba and Jingiber officinale were altogether put into water and essence was extracted at 80oC, and then the extract was concentrated at 75oC. The herb extract product was made by adding vitamins, amino acids and honey to the concentrated herb extract. The amount of gas produced from the herb extract product was increased as inoculated cell number increased but decreased as Brix concentration increased. Gases were produced in small amount when incubation was made at 4oC but large amounts of gases were produced at 25 or 40oC of incubation. The gas production and growth of Zygosaccharomyces sp. were measured after browning reaction was induced by heating at 85oC for 12 hours. It appeared that heating treatment did not induce any significant change in the gas production and growth of the cell. The effects of addition of various sugar to the herb extract produce were also invesigated. Amounts of gas production were in the order of glucose>sucrose>oligosaccharide>stevioside. The viable cell count was measured as 6.0$\times$107 CFU/g when glucose was added to the herb extract product. The viable cell counts were 5.0$\times$106, 3.0$\times$103, and 3.0$\times$102 CFU/g in sucrose, oligosaccharide and stevioside added herb extract product, respectively. The amount of gas production from the herb extract product was remarkably reduced by addition of such food preservatives as sodium benzoate and DF 100. TLC(thin layer chromatography) chromatogram of the herb extract showed stability of the herb extract in the above treatments.

• 한국주조공학회지
• /
• 제23권5호
• /
• pp.268-275
• /
• 2003

The mechanism of the hydrogen gas pore formation was investigated in Lost Foam Casting of Al-alloy by reduced pressure test and real casting. The hydrogen gas pick-up was affected by the formed gas during the decomposition of polystyrene in addition to the liquid product. It depended on pouring temperature and a proper temperature of metal front gave the minimum hydrogen pick-up. At a low pouring temperature, the hydrogen went into the melt mainly from entrapped liquid product of polystyrene but pores were formed from the gas as well as the liquid product at a high pouring temperature. The mold flask evacuation down to 710torr decreased the gas porosity down by around 0.4% vol%. The entrapped decomposition product of polystyrene in the melt was observed through the visualization of filling behavior of Al alloy-melt with the high speed camera.

• Design & Manufacturing
• /
• 제8권1호
• /
• pp.19-22
• /
• 2014

Today, looking at the trend of product development, interests of injection technology to reduce weldline are growing because of increases of polymer composite materials that containing functional elements and demand of no-painted injection in accordance with environmental regulations. In this paper, surface temperatures of mold increased using high temperature gas for elimination of weldline and characteristics of weldline are analyzed according to mold temperature($60^{\circ}C{\sim}120^{\circ}C$).

• 한국수소및신에너지학회논문집
• /
• 제31권4호
• /
• pp.380-386
• /
• 2020

This paper represents an analysis of the economic impact of firing natural gas/diesel and natural gas/by-product oil mixtures in diesel engine power plants. The objects of analysis is a power plant with electricity generation capacity (300 kW). Using performance data of original diesel engines, the fuel consumption characteristics of the duel fuel engines were simulated. Then, economic assessment was carried out using the performance data and the net present value method. A special focus was given to the evaluation of fuel cost saving when firing natural gas/diesel and natural gas/by-product oil mixtures instead of the pure diesel firing case. Analyses were performed by assuming fuel price changes in the market as well as by using current prices. The analysis results showed that co-firing of natural gas/diesel and natural gas/by-product oil would provide considerable fuel cost saving, leading to meaningful economic benefits.

• 한국가스학회지
• /
• 제17권2호
• /
• pp.50-58
• /
• 2013

공정플랜트에는 다양한 배관이 고압, 고온의 인화성, 폭발성 물질을 이송하고 있다. 잦은 설계 변경 및 증설 등으로 복잡한 형상으로 배관이 형성되어 있는 경우가 많으나 배관의 구조가 단순하여 실제 위험성에 비해 안전 관리가 부족한 경우가 많다. 본 연구에서는 국내 한 업체에서 부생가스를 연료로 사용하던 배관을 설계 변경하여 천연가스와 혼합하여 사용하도록 사례를 활용하여, 배관의 안전성을 평가 하는 방법을 예시하였다. 배관의 설계 변경 후 안전성을 ASME 기준에 따라 재평가하고, 배관의 주요 관리부위를 결정하는 방법을 제시하였다. 배관의 분기 및 루프 등이 다수 복잡하게 연결되어있는 가스혼합용 믹싱드럼 배관 시스템을 대상으로 해석하였다. 배관의 주요부위 응력 민감도를 이해하기 위해 배관의 지지대 구속조건 및 외부 온도를 변화시켜 가면서 이들의 영향을 연구하였다. 또한 부생가스가 포함하고 있는 수소가스에 의한 손상 가능성에 대해서도 논의하였다.

• 대한안전경영과학회지
• /
• 제26권1호
• /
• pp.99-106
• /
• 2024

In the event of an emergency such as facility shutdown during process operation, the by-product gas must be urgently discharged to the vent stack to prevent leakage, fire, and explosion. At this time, the explosion drop value of the released by-product gas is calculated using ISO 10156 formula, which is 27.7 vol%. Therefore, it does not correspond to flammable gas because it is less than 13% of the explosion drop value, which is the standard for flammable gas defined by the Occupational Safety and Health Act, and since the explosion drop value is high, it can be seen that the risk of fire explosion is low even if it is discharged urgently with the vent stock. As a result of calculating the range of explosion hazard sites for hydrogen gas discharged to the Bent Stack according to KS C IEC 60079-10-1, 23 meters were calculated. Since hydrogen is lighter than air, electromechanical devices should not be installed within 23 meters of the upper portion of the Bent Stack, and if it is not possible, an explosion-proof electromechanical device suitable for type 1 of dangerous place should be installed. In addition, the height of the stack should be at least 5 meters so that the diffusion of by-product gas is facilitated in case of emergency discharge, and it should be installed so that there are no obstacles around it.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.11-21
• /
• 2019

In product design, the initial design stage is being increasingly emphasized because it significantly influences the successive product development and production stages. However, for larger and more complex products, it is very difficult to accurately predict product reliability in the initial design stage. Various design methodologies have been proposed to resolve this issue, but maintaining reliability while exploring design alternatives is yet to be achieved. Therefore, this paper proposes a methodology for conceptual design considering reliability issues that may arise in the successive detailed design stages. The methodology integrates the independency of axiomatic design and the hierarchical structure of failure mode, effects, and criticality analysis (FMECA), which is a technique widely used to analyze product reliability. We applied the proposed methodology to a liquefied natural gas fuel gas supply system to verify its effectiveness in the reliability improvement of the design process.