• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.2
• /
• pp.86-90
• /
• 2012

The gaseous product of nitrogen cycle, nitrous oxide ($N_2O$) is a potent greenhouse gas whose Global Warming Potential (GWP) is about 300 times greater than $CO_2$. The dynamics of $N_2O$ emission are controlled by such environments and soil conditions. The main aim of this study is to investigate variations of $N_2O$ emission and its controlling factors with different land-use patterns in Haean basin. A forest, a radish field and a rice paddy were selected as three different land-use patterns. Their $N_2O$ emissions were measured every month during a growing season. We also collected soil samples with seasons and analyzed soil characteristics including inorganic nitrogen content. $N_2O$ emission was greatest at the radish field likely due to anthropogenic nitrogen addition by fertilization. Soils of forest and rice paddy also contained inorganic nitrogen originated from organic matter. However, the spatial variation was great and it looks that nitrogen cycle and $N_2O$ production were slower than that of radish field. Intensive observation and control of fertilization would be requiredto adjust $N_2O$ emission from agriculture soils.

• Journal of Nutrition and Health
• /
• v.14 no.4
• /
• pp.175-181
• /
• 1981

This study was carried out to investigate the feasibility of production of soy yogurt, which is inexpensive and high protein product with an acceptable flavor, from soy milk using lactic acid bacteria. Utilization of various carbohydrates by Lactobacillus acidophilus, Streptococcus thermophilus and Lactobacillus bulgaricus was stuied. Sucrose, the major carbohydrate in soymilk, was fermented by L. acidophilus and S. thermophilus. None of the testing microorganisms was able to ferment melibiose and raffinose. Growth of lactic acid bacteria in soymilk was examined every 4 hour. L. acidophilus exhibited the highest growth rate during the early stage. After 16 hours of incubation, however, all the cultures with the exception of L. bulgaricus grew at nearly equal rates. Microscopic examination of mixed cultures showed that the presence of S. thermophilus was much more pronounced than that of L. bulgaricus. All the cultures with the exception of L. bulgaricus formed acid rapidly during 16 hours of incubation, bringing the titratable acidity to 0.6% and pH to 4.3, which was sufficient to cause coagulation of soymilk. L. bulgaricus produced acid to a much lesser extent and caused coagulation of soymitk after 30 hours at earliest. Three kinds of yogurts were prepared from 100% soymilk, 100% milk and 50% soy-50% milk combination by S. thermophilus and were evaluated by taste panel. Soy yogurt received a significantly lower mean odor score than milk yogurt. Soy yogurt had custardlike texture, while milk yogurt was syrupy. However the scores for texture as well as those for color and flavor did not differ significantly among the treatment. The mean total scores for yogurts were not significantly different and were equivalent to ratings between good and high fair.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.34-46
• /
• 2005

For treating a huge amount of plastic waste with the environment problem, pyrolysis of plastic waste into alternative fuel oil is one of important issue in recycling methods. This study was introduced over the trend of generation of plastic waste, pyrolysis technology in domestic and foreign countries, basic technology in pyrolysis process and new technology of pyrolysis developed in KIER (Korea Institute of Energy Research). The characteristics of process developed in KIER are the continuous loading treatment of mixed plastic waste with an automatic control system, the minimization of wax production by circulation pyrolysis system in non-catalytic reactor, the reuse of gas produced and the oil recovery from sludge generated in pyrolysis plant, which have greatly the advantage economically and environmetally. The experiment result data in 300 ton/yr pilot plant showed about 81 wt% liquid yield for 3 days continuous reaction time, and also the boiling point distribution of light oil (LO) and heavy oil (HO) produced in distillation tower was a little higher than that of commercial gasoline and diesel, respectively.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.855-865
• /
• 2001

The optimization condition of injection molding for a commercial product of TV speaker grille of A Company was induced using a CAE software of Moldflow. The flow and packing phase analysis was performed by using flow balance, runner balance, and the intermediate one by using the above two balances, which were used for controlling the amount of packing resins into the cavity, Later, the analysis performed by using the measured viscosity (local database) at various shear rates and the results were compared with the computer simulation using the standard database. Flow balance induced minimized weld line resulted in a better appearance and physical properties of the were line, but exhibited a disadvantage of large deformation and gas formation due to over-packing of the molten resin in the center of the speaker grille. Runner balance improved the disadvantage of the flow balance by controlling the amount of molten resin injected from the gate, however resulted reduced mechanical properties and poor appearance of the weld line. However, the modified method induced from the flow and runner balance improved the disadvantages by changing the runner size. In addition, the analyses based on the local database and the standard database were compared. Although the measured viscosity was slightly higher and the temperature distribution was broader than the standard database, no distinct difference was obtained from the analysis using the two different databases.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.79-89
• /
• 1988

This experiment was carried out to investigate the difference of compositions between petroleum ether extract and its tall oil in Pinus rigida Mill. xylem and to obtain the basic data on effective extraction and its utilization of by-product, resin and fatty acid, when pulp making. After both petroleum ether extract from wood meal and its tall oil in pitch pine were separated to the resin and fatty acid by using DEAE-Sephadex and aluminum oxide column, these were analyzed with gas chromatograph. The results obtained were as follows: 1. Fatty acids contained as ester form in living trees were varied by peroxide of organic solvent in petroleum ehter extraction and cooking chemicals in cooking. 2. Pimaric-type acid was eluted earlier than abietic-type acid in resin acids and the fewer the carbons, the earlier the elution in fatty acids. 3. The retention time of SE-30 column was even smaller than that of OV-101 column but the relative retention time obtained by using methyl pimarate and methyl stearate as internal standard was nearly identical. 4. Both petroleum ether extract and tall oil mainly consisted of resin acids, expecially abietic-type acid. 5. Tall oil had more fatty acid but less resin acid than petroleum ether extract. Also, the content of unidentified materials was increased owing to the isomerization and the shift of double bond position in unsaturated fatty acids by high temperature and cooking chemicals when cooking.

• Clean Technology
• /
• v.23 no.1
• /
• pp.104-112
• /
• 2017

Hydrogen production via steam reforming of liquefaction liquid from marine algae over hydrothermal liquefaction was carried out at 873 ~ 1073 K with a commercial catalyst and Ni based $K_2Ti_xO_y$ added catalysts. Liquefaction liquid obtained by hydrothermal liquefaction (503 K, 2 h) was used as a reactant and comparison studies for catalytic activity over different catalysts (FCR-4-02, $Ni/K_2Ti_xO_y-Al_2O_3$, $Ni/K_2Ti_xO_y-SiO_2$, $Ni/K_2Ti_xO_y-ZrO_2/CeO_2$ and Ni/$K_2Ti_xO_y$-MgO), reaction temperature were performed. Experimental results showed Ni/$K_2Ti_xO_y$ based catalysts ($Ni/K_2Ti_xO_y-Al_2O_3$, $Ni/K_2Ti_xO_y-SiO_2$, Ni/$K_2Ti_xO_y-ZrO_2$/ $CeO_2$ and Ni/$K_2Ti_xO_y$-MgO) have a higher activity than commercial catalyst (FCR-4-02) and In particular, a product composition was different depending on support materials. An acidic support ($Al_2O_3$) and a basic support (MgO) led to a higher selectivity for CO while a neutral support ($SiO_2$) and a reducing support ($ZrO_2/CeO_2$) resulted in a higher $CO_2$ selectivity due to water gas shift reaction.

• Journal of the Korea Convergence Society
• /
• v.9 no.7
• /
• pp.241-249
• /
• 2018

The military purpose vehicles are developed by using the platform of civil vehicles according to the commercial vehicle expansion plan and military supplied product commercialization policy. But the information related to the military purpose vehicle which adopts the same platform with the civil vehicle is forced to be exposed because its information is revealed by containing into the maintenance manual and electric circuit diagram. Especially, the information disclosure should be blocked by reviewing the application of technology protection because the military vehicle becomes combating purposed mixed equipment when the missile and radar are mounted. The mixed equipment means the one configured with more than 2 types of equipment, and it is categorized into the main and sub equipment. This study was performed to derive the problems in Korean system for vehicle part test evaluation on the mixed equipment and the defense industry technology protection system, and to derive the methods for improving through interviews with the specialists. The conflicts between the civil laws and army regulation were reduced by adding a clause that the engine reflected with the newest emission gas standard should be mounted based on the time of force integration, and the commercialized military supplies were designated as element technology of defense industry technology in consideration of its roles and functions.

• Applied Chemistry for Engineering
• /
• v.20 no.1
• /
• pp.62-66
• /
• 2009

Utilization and interest of unconventional fuel and process residue such as oil sand and its residue, oil sand coke, have been increased because of the continuous rise of fuel price and conventional fuel availability. In this study, the gasification of oil sand coke produced from coking process of oil sand was performed to utilize as an energy resource using lab-scale fixed bed gasification system. The combustion characteristics of oil sand bitumen and oil sand coke were investigated by using TGA and lab-scale gasification system was applied to reveal the characteristics of produced syngas composition with oxygen/fuel ratio, temperature and steam injection rate. Oil sand coke shows a high carbon content, heating value and sulfur content and low ash content and reactivity. In case of oil sand coke gasification, generally with increasing temperature, the amount of steam introduced and decreasing oxygen injection rate, $H_2$ content in product gas increased while the $CO_2$ content decreased. The calorific value of syngas shows about $2100kcal/Nm^3$ and this result indicates that the oil sand coke can be used as a resource of hydrogen and fuel.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.419-424
• /
• 2018

In this work, effect of the culture medium composition on the fermentation process of Clostridium ljungdahlii, which is acetogenic bacteria to product ethanol from synthesis gas, was examined to improve the microbial growth and ethanol production. Components of the culture medium such as yeast extract, fructose, $NH_4Cl$, and $K_2HPO_4$ were selected as influence factors for the cell growth and ethanol production. As the concentration of yeast extract increased, both of the cell growth and ethanol production increased. And the ethanol productivity was the highest at an yeast extract of 0.05 g/L, which is lower than that of base medium. As the concentration of fructose increased, the cell growth increased, but the ethanol production decreased when the concentration of fructose was higher than that of base medium (5 g/L). In an experiment with the yeast extract of 5 g/L, produced ethanol concentration was the highest (0.297 g/L) when fructose concentration was 5 g/L, however, the specific ethanol productivity was higher (0.281 g/g DCW) when the fructose was not added due to very low cell mass. The cell growth and ethanol production were not significantly influenced by $NH_4Cl$ concentration, however the growth inhibition was observed at a 30 g/L of $NH_4Cl$. When the concentration of $K_2HPO_4$ increased, both of the cell growth and ethanol production increased. In experiments with $NH_4Cl$ and $K_2HPO_4$, specific ethanol productivities were higher when the low concentration of yeast extract was used.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.5
• /
• pp.359-366
• /
• 2013

This work is investigated for the catalytic decomposition of hydrogen iodide (HI). Platinum was used as active material by loading on $ZrO_2-SiO_2$ mixed oxide in HI decomposition reaction. To obtain high and stable conversion of hydrogen iodide in severe condition, it was required to improve catalytic activity. For this reason, a method increasing dispersion of platinum was proposed in this study. In order to get high dispersion of platinum, zirconia was incorporated in silica by sol-gel synthesis. Incorporating zirconia influence increasing platinum dispersion and BET surface area as well as decreasing deactivation of catalysts. It should be able to stably product hydrogen for a long time because of inhibitive deactivation. HI decomposition reaction was carried out under the condition of $450^{\circ}C$ and 1 atm in a fixed bed reactor. Catalysts analysis methods such as $N_2$ adsorption/desorption analysis, X-ray diffraction, X-ray fluorescence, ICP-AES and CO gas chemisorption were used to measurement of their physico-chemical properties.