• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.294-299
• /
• 2008

Steam reforming of methane is the most wide spread method for hydrogen production. It has heed studied more than 60 years. methane reforming has advantages in technological maturity and economical production cost. Using a high-temperature solar thermal energy is an advanced technology in Steam reforming process. The synthesis gas, the product of the reforming process, can be applied directly for a combined cycle or separated for a hydrogen. In this paper, hydrogen conversion rate of a solar chemical reactor is calculated using commercial CFD program. 2 models are considered. Model-1 is original model which is designed from the former researches. And model-2 is ring-disk set of baffle is inserted to enhance the performance. The solar chemical reactor has 3 inlet nozzle at the bottom of the side wall near quartz glass and an exit is located at the top. Methane and steam is premixed with 50:50 mole fraction and goes into the inside. Passing through the porous media, the reactants are conversed into hydrogen and carbon monoxide.

• Journal of Welding and Joining
• /
• v.27 no.2
• /
• pp.63-68
• /
• 2009

Microminiature heat exchanger has been applied to the gas turbine in order to increase energy efficiency. During the production of microminiature heat exchanger, however, it is very difficult to weld tube to tubesheet. In this study, therefore, welding process of resistance ring projection was used, and weld tensile tests were performed. Sound weld joint was obtained as a result of applying resistance ring projection welding to microminiature heat exchanger to tubesheet. Cold weld occurred at under 1600A. Even though tensile strength was increased with increasing current, splash occurred and tensile strength decreased at 2000A due to the excessive current. Therefore it was determine that the optimal current is 1900A. As result of tensile tests based on ASME code for tube to tubesheet weldment, rupture position was weldment due to Fs(Fractured section) of nugget, which was smaller than tube thickness (t), and it was proven as a partial strength welding because of the average joint efficiency fr = 0.90.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4B
• /
• pp.541-547
• /
• 1999

Reactive ion etching process for InP using BCl3/O2/Ar high density inductively coupled plasma was investigated. The experimental design method proposed by the Taguchi was utilized to cover the whole parameter range while maintaining reasonable number of actual experiments. Results showed that the ICP power and the chamber pressure were the two dominant parameters affectsing etch results. It was also observed that the etch rate decreased and the surface roughness improved as the ICP power and the bias voltage increased and as the chamber pressure decreased. The Addition of oxygen to the gas mixture drastically improved surface roughness by suppressing the formation of the surface reaction product. The optimum condition was ICP power 600W, bias voltage -100V, 10% $O_2$, 6mTorr, and $180^{\circ}C$, resulting in about 0.15$\mu\textrm{m}$ etch rate with smooth surfaces and vertical mesa sidewalls Also, the maximum etch rate of abut 4.5 $\mu\textrm{m}$/min was obtained at the condition of ICP power 800W, bias voltage -150V, 15% $O_2$, 8mTorr and $160^{\circ}C$.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.1
• /
• pp.113-121
• /
• 2010

Recently, there has been a great deal of public interest in health foods, such as turmeric (Curcuma longa L). In this study, the baking features of turmeric powder were evaluated by making pan bread. To accomplish this, the effects of added turmeric powder on the results of mixograph analysis as well as, the pH and, fermentation rate were measured. In addition, the features of the bread were examined by testing the stickiness of the dough and the TPA of the product using a texture analyzer. Finally, the consumer's preferences were investigated by evaluation of the color difference, crumbScan and sensory evaluation. The results revealed that as the level of turmeric powder increased, the pH decreased. which resulted in the gas possessing capacity of the dough improving and the fermentation persistence of the dough increasing. In addition, the stickiness increased as the turmeric powder content increased. However, there were significant differences among breads produced using different amounts of turmeric powder. Evaluation of the taste revealed that the TP3 group had the higher score than control score and TP7 had the lowest score. In overall preference, TP7 was especially low and the preference decreased as the content of turmeric powder increased.

• Journal of Environmental Science International
• /
• v.21 no.2
• /
• pp.165-179
• /
• 2012

Indirect $CO_2$ effect due to non-methane volatile organic compound (NMVOC) emissions from solvent and product use and fugitive NMVOC emissions from fuels in the Republic of Korea and 13 Annex I countries under United Nations Framework on Climate Change were estimated and the proportions of them to total greenhouse gas (GHG) emissions ranged from 0.092% to 0.45% in 2006. Indirect greenhouse effect ($CO_2$, $CH_4$, and $O_3$) were estimated at 13 photochemical assessment monitoring sites in the Republic of Korea using concentrations of 8 NMVOCs of which indirect global warming potential (GWP) were available. The contribution of toluene to mixing ratio was highest at 11 sites and however, the contribution of toluene to indirect greenhouse effect was highest at nine sites. In contrast to toluene, the contributions of ethane, butane, and ethylene were enhanced. The indirect greenhouse effects of ethane and propane, of which ozone formation potentials are the lowest and the third lowest respectively among targeted 10 NMVOCs, ranked first and fourth highest respectively. Acetaldehyde has relatively higher maximum incremental reactivity and is classified as probable human carcinogen however, its indirect GWP ranked second lowest.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.5
• /
• pp.912-917
• /
• 2010

It was known that oil-filled transformer's life depended on insulating paper which was applied to transformers for insulating of transformer. Therefore when paper was aged, its electrical, mechanical and chemical characteristics were changed. Especially if operating temperature was high, paper was quickly damaged. As cellulose paper which was mainly used for solid insulation of transformers was degraded, the cellulose polymer chains broke down into shorter lengths and gases such as CO, $CO_2$, $CH_4$, $C_2H_4$ and so on were produced from paper. Also by-product known as furan compounds were producted from paper and it were dissolved within insulating oil. In this paper accelerating aging cell was aged during 60 hours at 100, 150, 180 and $200^{\circ}C$, respectively, so evaluating the chemical characteristics of cellulose paper by thermal. An it were performed analysis such as tensile strength(TS), dissolved gas analysis(DGA) and high performance liquid chromatography(HPLC). Also for analyzing of correlation between insulating degradation characteristics, it was performed linear regression method as statistical treatment.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.6
• /
• pp.109-114
• /
• 2016

This study executes Importance-Performance Analysis (IPA) on existing firefighter helmet attributes and gathers ideas for improvements from fire-fighting officers to develop a convergence firefighter helmet. The results of empirical analysis were as follows: First, the weight, head fitness, ease of wearing and removal, and ease of managing the existing helmet's attributes need urgent improvement. In addition, fire-fighting officers want to add innovative functions such as oxygen deficiency alarms, poison gas sensors, temperature sensors, and network communication systems to the convergence firefighter helmet under development.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.615-616
• /
• 2006

A micro-fuel processor system integrating steam reformer and partial oxidation reactor was manufactured using low temperature cofired ceramic (LTCC). A CuO/ZnO/$Al_2O_3$ catalyst and Pt-based catalyst prepared by wet impregnation were used for steam reforming and partial oxidation, respectively. The performance of the LTCC micro-fuel processor was measured at various operating conditions such as the effect of the feed flow rate, the ratio of $H_2O/CH_3OH$, and the operating temperature on the LTCC reformer and CO clean-up system. The catalyst layer was loaded with "Fill and Dry" coating for small volume. The product gas was composed of $70\sim75%$ hydrogen, $20\sim25%$ carbon dioxide, and $1\sim2%$ carbon monoxide at $250\sim300^{\circ}C$, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.4
• /
• pp.637-644
• /
• 2001

Polymer materials have a lot of merits including the low cost and the easiness of forming. For these reasons they are widely using at many manufacturing industries. Microcellular foaming process appeared at MIT in 1980s to save a quantity of material and increase mechanical properties. There are many process variables in appling microcellular foaming process to the conventional injection molding process. They can be solved by using Axiomatic Design Method which is very useful design method for designing a new product. Its main character is scientific and analytical. The information about the thickness of cavity plays an important role in making an effective foam. The goal of this research is to design mold system for advance of foaming magnitude with axiomatic design method. There is a relation between the change of cavitys thickness and foaming magnitude made after inserting a gas. R/t is a conception that indicate proportion between radius and thickness of cavity in mold system. By means of SEM observation of side surface of cavity sample, foaming magnitude of polymer in microcellular foaming process is decreasing gradually as the value of R/t is increasing. In this paper, an advanced mold system was presented by mapping the relation between functional requirements and design parameters.

• Natural Product Sciences
• /
• v.18 no.4
• /
• pp.244-249
• /
• 2012

Angelica acutiloba is one of the most intensively cultivated medicinal plants in Korea. The roots of this plant have been used as an important herbal drug, especially for the treatment of various female disorders, as the traditional therapy in Korea and other Asian countries. Consumption of its fresh leaves as a healthy vegetable has recently increased. In this study, essential oil fractions were extracted from the roots and leaves of this plant by steam distillation. Compositions of the two oils were compared by gas chromatography-mass spectrometry (GC-MS). The antibacterial activities of the essential oil were determined against three strains of Escherichia coli. DPPH radical scavenging and reducing power tests were performed to evaluateits antioxidant activities. The cytotoxic activities of the essential oil against a human breast and a uterine cancer cell line were estimated by MTT tests. Additionally, the morphological changes after treatment of the oil fraction were observed under a microscope. The essential oil fraction and its main components, Z-ligustilide and butylidene phthalide, inhibited the growth of three E. coli strains examined, with minimum inhibiting concentrations (MICs) ranging from 1.0 mg/ml to 8.0 mg/ml. Additionally, the essential oil fraction of A. acutiloba exhibited significant DPPH free radical scavenging activity and reducing power. Significant cytotoxic activities of the A. acutiloba essential oil were observed for human uterine (Hela) and breast (MCF-7) cancer cell lines.