• 제어로봇시스템학회논문지
• /
• 제9권7호
• /
• pp.498-506
• /
• 2003

A computer vision system applied to an intelligent safety vehicle has been required to be worked on a small sized real time special purposed hardware not on a general purposed computer. In addition, the system should have a high reliability even under the adverse road traffic environment. This paper presents a design and an implementation of an onboard hardware system taking into account for high speed image processing to analyze a road traffic scene. The system is mainly composed of two parts: an early processing module of FPGA and a postprocessing module of DSP. The early processing module is designed to extract several image primitives such as the intensity of a gray level image and edge attributes in a real-time Especially, the module is optimized for the Sobel edge operation. The postprocessing module of DSP utilizes the image features from the early processing module for making image understanding or image analysis of a road traffic scene. The performance of the proposed system is evaluated by an experiment of a lane-related information extraction. The experiment shows the successful results of image processing speed of twenty-five frames of 320$\times$240 pixels per second.

• 대한임베디드공학회논문지
• /
• 제16권4호
• /
• pp.153-161
• /
• 2021

Real-time access is required to handle continuous and unstructured data and should be flexible in management under dynamic state. Platform can be built to allow data collection, storage, and processing from local-server or multi-server. Although the former centralize method is easy to control, it creates an overload problem because it proceeds all the processing in one unit, and the latter distributed method performs parallel processing, so it is fast to respond and can easily scale system capacity, but the design is complex. This paper provides data collection and processing on one platform to derive significant insights from various data held by an enterprise or agency in the latter manner, which is intuitively available on dashboards and utilizes Spark to improve distributed processing performance. All service utilize dockers to distribute and management. The data used in this study was 100% collected from Kafka, showing that when the file size is 4.4 gigabytes, the data processing speed in spark cluster mode is 2 minute 15 seconds, about 3 minutes 19 seconds faster than the local mode.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.798-800
• /
• 2003

The time shift processing of ground measured surface temperature with the meteorological variables has no evaluated function. We introduce new evaluating function. To use this evaluating function, the algorithm of time-shift processing will be able to be reliable and get error-bar for all moving measured point's data. We will finally obtain the area averaged surface temperature by land observation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.828-831
• /
• 1997

One of the most important design factor for the image tracker is the speed of the data processing which allows real-time operation of the system and provides reasonably accurate performance at the same time. Use of powerful DSP alone does not guarantee to meet such requirement. In this paper, a simple efficient algorithm for real-time multi-target image tracking is suggested. The suggested method is based on a recursive centroiding technique and color table look-up. This method has been successfully implemented in a image processing system for Micro-Robot Soccer Tournament(MIROSOT). This tracker can track positions of a ball, 3 enemies, and 3 agents at the same time. The experimental results show that the processing time for each frame of image is less than 7ms, which is well within the 60Hz sampling interval for real-time operation.

• 대한전자공학회논문지
• /
• 제26권10호
• /
• pp.1518-1527
• /
• 1989

We proposed a technique to design a multimicrocomputer system for real-time parallel processing with an interconnection network which has good network latency time. In order to simplify the performance evaluation and the design procedure under the hard real-time constraints we defined network latency time which takes into account the queueing delays of the networks. We designed a dynamic interconnection network following the proposed technique, and the simulation results show that we can easily estimate the multimicrocomputer system's approximate performance using the defined network latency time before the actual design, so this definition can help the efficient design of the real-time parallel processing systems.

• 전자공학회논문지B
• /
• 제33B권12호
• /
• pp.13-23
• /
• 1996

In tis paper we researched the implementation methodology and techniques for the high real-time responsive operating system of an ISDN PABX system. The operating system we developed takes a high role as a dedicated real-time operating system for PABX systems. It provides the functions and synchronization, interprocessor communication, interrupt processing, and data I/O processing. And also it provides lots of real-time processing functions for supproting various real-time applications. Finally, we evaluated the performance by measuring the best, the average, and the worst-case execution time of all functions implemented in this real-time operating system.

• Management Science and Financial Engineering
• /
• 제18권1호
• /
• pp.13-20
• /
• 2012

This paper considers a revenue maximization problem on a single processor. Each job is identified as its processing time, initial reward, reward decreasing rate, and preferred start time. If the processor starts a job at time zero, revenue of the job is its initial reward. However, the revenue decreases linearly with the reward decreasing rate according to its processing start time till its preferred start time and finally its revenue is zero if it is started the processing after the preferred time. Our objective is to find the optimal sequence which maximizes the total revenue. For the problem, we characterize the optimal solution properties and prove the NP-hardness. Based upon the characterization, we develop a branch-and-bound algorithm for the optimal sequence and suggest five heuristic algorithms for efficient solutions. The numerical tests show that the characterized properties are useful for effective and efficient algorithms.

• 제어로봇시스템학회논문지
• /
• 제11권1호
• /
• pp.84-91
• /
• 2005

In this paper, we describe the real-time parallel processing simulator developed for the use of performance analysis of rolling missiles. The real-time parallel processing simulator developed here consists of seeker emulator generating infrared image signal on aircraft, real-time computer, host computer, system unit, and actual equipments such as auto-pilot processor and seeker processor. Software is developed from mathematic models, 6 degree-of-freedom module, aerodynamic module which are resided in real-time computer, and graphic user interface program resided in host computer. The real-time computer consists of six TIC-40 processors connected in parallel. The seeker emulator is designed by using analog circuits coupled with mechanical equipments. The system unit provides interface function to match impedance between the components and processes very small electrical signals. Also real launch unit of missiles is interfaced to simulator through system unit. In order to apply the real-time parallel processing simulator to performance analysis equipment of rolling missiles it is essential to perform the performance verification test of simulator.

• 제어로봇시스템학회논문지
• /
• 제14권7호
• /
• pp.720-725
• /
• 2008

This paper proposes a system architecture for USN with a service robot to provide more active assisted living services for elderly persons by monitoring their mental and physical well-being with USN environments at home, hospital, or silver town. Sensors embedded in USN are used to detect preventive measures for chronic disease. Logged data are transferred to main controller of a service robot via wireless channel in which the analysis of data is performed. For the purpose of handling emergency situations, it needs real-time processing on gathering variety sensor data, routing algorithms for sensor nodes to a moving sink node and processing of logged data. This paper realized multi-hop sensor network to detect user movements with biometric data transmission and performed algorithms on Xenomai, a real-time embedded Linux. To leverage active sensing, a mobile robot is used of which task was implemented with a priority to process urgent data came from the sink-node. This software architecture is anticipated to integrate sensing, communication and computing with real-time manner. In order to verify the usefulness of a proposed system, the performance of data transferring and processing on a real-time OS with non real-time OS is also evaluated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.199-202
• /
• 1999

Many processing times for fabricating complex shaped parts by near net shape process such as thixoforming or semi-solid forming, are required due to the time for die design, induction heating and forming process. Therefore, for the thixoforming process, multi-capacity induction heating process is very important due to the reduction of the processing time and cost. It is indispensable to adopt a power-time heating pattern which manages to conciliate complete eutectic melting at the core with limited overheating at the periphery. The total reheating time is thus dependent on billet diameter; in inches$(pm20%)$. Typically, high frequency is used for the rapid reheating of the billet to the eutectic temperature range and low frequency for the remelting of the desired fraction of liquid and for the radial homogeneization of the liquid fraction. So in this study, the multi-capacity induction heating conditions of ALTHIX 86s alloy to reduce the processing time and cost would be proposed. The suitability of multi-capacity induction heating conditions would be verified through the comparison to Garat's data.