• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.189-192
• /
• 2012

Manufacturing process for silicate glass phosphors containing Eu2+ activator and their photoluminescence property have been studied. We adopted powder sintering process instead of traditional glass melting process for making glass phosphor. At first, phosphor powders were synthesized at 1200 ℃ for 2-3 hours under a reducing atmosphere with 10% H2-90% N2 gas mixture. The reduced powders were compacted into discs and then the discs weresintered at 1400 ~ 1500 ℃ for 1 hr under a reducing atmosphere of 5H2-95% N2. The enhancement of PL intensity by Al2O3 addition, XPS binding energy shift of Si 2p and O 1s, sintering shrinkage, and crystallization were characterized.

• 한국세라믹학회지
• /
• 제55권6호
• /
• pp.527-555
• /
• 2018

High-temperature thermal insulation materials challenge extensive oxide candidates such as porus $SiO_2$, $Al_2O_3$, yttria-stabilized zirconia, and mullite, due to the needs of good mechanical, thermal, and chemical reliabilities at high temperatures simultaneously. Recently, porous rare earth (RE) silicates have been revealed to be excellent thermal insulators in harsh environments. These materials display attractive properties, including high porosity, moderately high compressive strength, low processing shrinkage (near-net-shaping), and very low thermal conductivity. The current critical challenge is to balance the excellent thermal insulation property (extremely high porosity) with their good mechanical properties, especially at high temperatures. Herein, we review the recent developments in processing techniques to achieve extremely high porosity and multiscale strengthening strategy, including solid solution strengthening and fiber reinforcement methods, for enhancing the mechanical properties of porous RE silicate ceramics. Highly porous RE silicates are highlighted as emerging high-temperature thermal insulators for extreme environments.

• 한국축산식품학회지
• /
• 제38권5호
• /
• pp.1101-1108
• /
• 2018

The aim of this study was to investigate the effects of dry-aging (DA) and the cooking process on the myofibril protein functionalities and in vitro digestibility of proteins in beef loin. Six sirloins from beef were dry-aged for 28 d, and the control group (n=6) was analyzed 2 d postmortem for this study. Dimensional changes (reduction of thickness and surface shrinkage) after cooking were significantly greater in the control group than the DA group, whereas the shear force of the DA group was significantly lower than that of the control. Effect of cooking on aggregation, hydrophobicity, and in vitro digestibility were significantly higher in the DA group than in the control. After cooking, the protein in DA sirloins was more oxidized than in the control samples. According to the sodium dodecyl sulfate-polyacrylamide gel electrophoresis result, the low molecular weight bands (below 17 kDa) increased in the DA group, finding that the protein characteristics of dry-aged beef was affected by cooking.

• 한국분말재료학회지
• /
• 제12권5호
• /
• pp.351-356
• /
• 2005

Nanoscale Al powder with thin layer of alumina was produced by Wire Electric Explosion (WEE) process. Spark-Plasma Sintering (SPS) was performed for the produced powder to confirm the effectiveness of SPS like so-called 'surface-cleaning effect' and so on. Crystallite size and alumina content of produced powder varied with the ratio of input energy to sublimation energy of Al wire ($e/e_s$): Increase in ($e/e_s$) resulted in the decrease of crystallite size and the increase of alumina content. Shrinkage curve during SPS process showed that the oxide surface layer could not be destroyed near the melting point of Al. It implied that there was not enough or no spark-plasma effect during SPS for Al/Alumina powder.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.149-158
• /
• 2004

In most RP processes, the inherent stair-stepped surfaces and shrinkage-induced warping of the parts require post processing such as surface finishing. To minimize such defects, VLH-ST, a newly developed RP process, employs a 3.9-mm thick expandable polystyrene (EPS) foam sheet and a hot wire to contour it to have slant linear-interpolated sides. The use of relatively thick sheets for layers, however, limits the process capability of constructing fine details, especially smaller than the layer thickness. This study is focused on the development of a post processing method fo fine details of VLM-ST parts. The post-processing tool was designed to meet all the requirements for the desirable post processing. It adopted a hot wire as a means of melting the EPS foam sheet. Various basic experiments on the post processing were carried out to obtain the optimal process conditions. The dominant process parameters such as the radiated heat input, the tool speed, and the gap between the tool tip and the foam sheet (tool height) were considered in the experiments. The effectiveness of the developed post-processing method fo forming or engraving fine details on the VLM-ST parts has been thus demonstrated. The experiments on engraving several sets of letters, such as CANESM, 인간, and 한국과학기술원, on the EPS foam sheet were carried out. In addition, a flowery shape was engraved on a three-dimensionally curved surface of a pottery-shape VLM-ST part.

• 대한조선학회논문집
• /
• 제53권4호
• /
• pp.275-281
• /
• 2016

One of the most important things for quality to meet ship-production schedule is an accuracy control. A ship is assembled by welding through whole production process, so it is important that loss by correction will not happen as much as possible by using some engineering skills like reverse design, reverse setting and margin for thermal shrinkage. These efforts are a quite effective in fabrication stages, but not in erection stages. If a ship block which consists of common steel is exposed to directional solar radiation, its dimensional accuracy will change high as time by its thermal expansion coefficient. Therefore, the measuring work would be often done at dawn or evening even with having a very accurate device. In this study, an FE analysis method is developed to solve this problem. It can change measured data affected by solar thermal distortion to ones not, even though ship-block is measured at an arbitrary time. It will use the time when measuring, the direction of block and the weather record by satellites. It is confirmed by a comparison between measured data of a ship-block and the result by suggested analysis method. Furthermore, a pre-processing system is also developed for fast application of the suggested analysis method.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권4호
• /
• pp.588-597
• /
• 2007

Low-fat ground pork patties, LFGPP (<10% total fat) formulated with 0.1, 0.2 and 0.3 percent sodium alginate (SA) were processed and compositional, processing and sensory characteristics were compared with control patties containing 20% fat. The moisture content of raw and cooked LFGPP were significantly (p<0.05) higher than control patties because of greater amount of added water in the formulation. The cooking yield, moisture and fat retention also increased linearly in different treatments of LFGPP. The dimensional parameters such as gain in height, decrease in diameter and shrinkage were significantly (p<0.05) lower in LFGPP in comparison to control. Amongst the sensory attributes, flavour showed a declining trend with the increase in concentration of SA in LFGPP. However, low-fat patties with 0.1% SA rated similar to high-fat control. The lipid profile revealed 49.78 and 43.22% decrease in total lipids and cholesterol content respectively, compared to control. The calorie content was reduced significantly (p<0.05) in LFGPP. The texture profile of LFGPP with 0.1% SA was similar to that of high-fat control. The LFGPP remained stable without any appreciable loss of physico-chemical, microbiological and organoleptic quality during refrigerated storage ($4{{\pm}}1^{\circ}C$) for 21 and 35 days in aerobic and vacuum packaging respectively.

• 한국의류학회지
• /
• 제28권1호
• /
• pp.131-142
• /
• 2004

When the cotton/polyester fiber mixed fabrics were treated with ferrous sulfate and oxalic acid for burn out finishing, it was examined how the effects of process conditions as concentration of burn out agents, temperature, time and pressure act onto the properties of polyester ground fabrics. The results are as follows. The effect of burn out finishing by pressure was greated in 3 kgf/$\textrm{cm}^2$. The properties as white index and tensile strength of polyester ground fabrics were decreased according as processing concentration, temperature time increases. The shrinkage was increased according as processing concentration, temperature time increases. The optimum condition of burn out agents to ferrous sulfate was 30% concentration, 150$^{\circ}C$, 1 min, 3 kgf/$\textrm{cm}^2$ and to oxalic acid was 10% concentration, 110$^{\circ}C$, 1min, 3 kgf/$\textrm{cm}^2$. And the optimum of ferrous sulfate and oxalic acid used in combination was 10% ferrous sulfate and 7% oxalic acid, 110$^{\circ}C$, 1 min., 3 kgf/$\textrm{cm}^2$.

• 한국가구학회지
• /
• 제11권1호
• /
• pp.13-23
• /
• 2000

This study was carried out to investigate the wood properties for development the proper uses of lesser-known tree species. The tested species are Kebambang(Pentace sp.), Bawang-bawang(Dysoxylum alliaceum Bl .), Garu buaya( Gonystylus brunescens A. Shaw)grown in Indonesia. fundamental wood properties such as anatomical, physical, mechanical and chemical properties and characteristics related to wood processing were examined. The results are summarized as follows : The woods of these species are diffuse porous, coarse textured, and interlocked grained. The heartwood of Kebambang is distinguished clearly to the sapwood, but the heartwood of other species are not distinguished clearly to the softwood. The woods of Kebambang and Bawang-bawang have the moderate weight density and the low strength properties, but Garu buaya has the high weight density and the high strength properties. The woods of these species has high shrinkage. The sawing characteristics of Kebambang are excellent but the other species are moderate. The machining characteristics by planer and drying characteristics of these species are moderate. These woods has poor characteristics in bending processing and decay durability. The wood of Bawang-bawang has high content of the extractives and lignin.

• 복식문화연구
• /
• 제15권4호
• /
• pp.702-712
• /
• 2007

The purpose of this study was to understand the current trend with regard to the material of jeans and the making method of jeans pattern and the characteristics of washing processing through the overall production status of jeans in casual brands and to offer the basic data for producing the high efficient jeans. The results were as follows. According to the survey of production status of jeans in casual brands, the fabric mixture was highest in the order of non-stretch denim 100% cotton, stretch denim cotton/spandex mix and denim with $1{\sim}2%$ weft direction spandex mix. The most frequently used processing method for denim was in the order of normal finishing, mercerization finishing, soft finishing and pigment finishing. The most frequently used method of washing finishing for jeans was in the order of forming by embossing washing, bio stone washing, normal washing, bio washing, and bio stone bleach washing. The average shrinkage was higher on waist circumference and pants length of warp direction rather than hips circumference, thigh circumference, hem circumference of weft direction.