• 한국농촌건축학회논문집
• /
• 제14권4호
• /
• pp.97-105
• /
• 2012

Winsborough Hall built by Martin L. Winehart who was the missionary of the Presbyterian Church of America in 1927 was built by Mrs. Winsborough's birthday contribution. Winsborough Hall was clearly divided into the original form built in 1927 and remodelled form by extension. Most of walls were constructed with several kinds of bricks for both sides and opening in the original form and remodelled form. Each room divided by inner wall was kept with original form because it is difficult to remodel it on the characteristics of building. But, it was confirmed through the related literatures that security of opening at some rooms and annexation of rooms through removal of the wall on the 2nd floor which was relatively easy to transform wall compared to the first floor were made. Variability of the wall affected the truss structure of roof and it created rare double truss structure. Architectural value of Winsborough Hall was in its first architectural trial using red brick in Gwangju region since 1920s. It suggested that it was differential architectural trial from Korean-Western mixed building constructed by the missionaries from 1940 to 1910 and buildings made of gray bricks prevailed from 1911 to 1920 and it showed the advancement in the architectural structure and materials.

• Smart Structures and Systems
• /
• 제19권6호
• /
• pp.653-663
• /
• 2017

The modal parameters of the deck of Runyang Suspension Bridge (RSB) as well as their relationships with wind and temperature are studied based on the data recorded by its Structural Health Monitoring System (SHMS). Firstly, frequency analysis on the vertical responses at the two sides of the deck is carried out to distinguish the vertical and torsional vibration modes. Then, the vertical, torsional and lateral modal parameters of the deck of RSB are identified using Hilbert-Huang Transform (HHT) and validated by the identified results before RSB was opened to traffic. On the basis of this, the modal frequencies and damping ratios of RSB during the whole process of Typhoon Masta are obtained. And the correlation analysis on the modal parameters and wind environmental factors is then conducted. Results show that the HHT can achieve an accurate modal identification of RSB and the damping ratios show an obvious decay trend as the frequencies increase. Besides, compared to frequencies, the damping ratios are more sensitive to the environmental factors, in particular, the wind speed. Further study on configuring the variation law of modal parameters related with environmental factors should be continued.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.868-871
• /
• 2006

Mortality of domestic people from cardiovascular disease ranked second, which followed that of from cancer last year. Therefore, it is very important and urgent to enhance the reliability of medical examination and treatment for cardiovascular disease. Heart Rate Variability (HRV) is the most commonly used noninvasive methods to evaluate autonomic regulation of heart rate and conditions of a human heart. In this paper, our aim is to extract a quantitative measure for HRV to enhance the reliability of medical examination for cardiovascular disease, and then develop a prediction method for extracting multi-parametric features by analyzing HRV from ECG. In this study, we propose a hybrid Bayesian classifier called FP-based Bayesian. The proposed classifier use frequent patterns for building Bayesian model. Since the volume of patterns produced can be large, we offer a rule cohesion measure that allows a strong push of pruning patterns in the pattern-generating process. We conduct an experiment for the FP-based Bayesian classifier, which utilizes multiple rules and pruning, and biased confidence (or cohesion measure) and dataset consisting of 670 participants distributed into two groups, namely normal and patients with coronary artery disease.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.159-162
• /
• 2006

This paper describes the ground system for COMS (Communication, Ocean, and Meteorological Satellite), the first Korean multi-purposed geostationary satellite, at MSC (Meteorological Satellite Center) in Korea. The overview of COMS MI (Meteorological Imager) will be introduced as well. KMA would implement mission planning for COMS MI operation and receive, process, interpret, disseminate, and archive MI data operationally for domestic and foreign user groups. Major missions of COMS MI are mitigation of natural hazard such as typhoon, dust storm, and heavy rain, and short-term warning of severe weather to protect human health and commerce. Moreover, research of climate variability and long-term changes will be supported. In accordance with those missions, the concept and design of COMPASS (COMS operation and meteorological products application service system), the ground system for COMS MI in MSC, have been setting up since 2004. Currently, COMPASS design is being progressed and will have finished the end of 2006. The development of COMPASS has three phases: first phase is development of fundamental COMPASS components in 2007, second phase is to integrate and test all of the COMPASS components in 2008, and the last phase is to operate COMPASS after COMS In-Orbit Tests in 2009.

• 지반과기술
• /
• 제3권3호
• /
• pp.15-22
• /
• 2006

The optimum blasting pattern to excavate a quarry efficiently and economically can be determined based on the minimum production cost, which is generally estimated according to rock fragmentation. Therefore, it is a critical problem to predict fragment size distribution of blasted rocks over an entire quarry. By comparing various prediction models, it can be ascertained that the result obtained from Kuz-Ram model relatively coincides with that of field measurements. Kuz-Ram model uses the concept of rock factor to signify conditions of rock mass such as block size, rock jointing, strength and others. For the evaluation of total production cost, it is imperative to estimate 3-D spatial distribution of rock factor for the entire quarry. In this study, a sequential indicator simulation technique is adopted for estimation of spatial distribution of rock factor due to its higher reproducibility of spatial variability and distribution models than Kriging methods. Further, this can reduce the uncertainty of predictor using distribution information of sample data. The entire quarry is classified into three types of rock mass and optimum blasting pattern is proposed for each type based on 3-D spatial distribution of rock factor. In addition, plane maps of rock factor distribution for each ground level are provided to estimate production costs for each process and to make a plan for an optimum blasting pattern.

• 천문학회보
• /
• 제41권2호
• /
• pp.43.1-43.1
• /
• 2016

The duration of star formation activity is a key to understanding the formation process of star clusters. Although a number of astronomers have attempted to derive the underlying age spread in photometric diagrams with a variety of stellar evolutionary models, the resultant findings are subject to uncertainties due to intrinsic variability of pre-main sequence (PMS) stars, observational errors, difficulties in reddening correction, and systematic differences in adopted stellar evolutionary models. The distribution of Li abundance for PMS stars in a cluster could, on the other hand, provide an alternative way to estimate the age spread. In this study, a total of 134 PMS stars in NGC 2264 are observed with the high resolution multi-object spectrogragh Hectochelle attached to the 6.5m Multi Mirror Telescope. We have successfully detected Li ${\lambda}6708$ resonance doublet for 86 low-mass PMS stars. The Li abundance of the stars is derived from their equivalent width using a curves of growth method. After correction for non-LTE effects, the underlying age spread of 3 - 4 Myr is inferred from the Li abundance distribution of low-mass PMS stars. We suggest that NGC 2264 formed on a timescale shorter than 5 Myr given the presence of embedded populations.

• 한국식품조리과학회지
• /
• 제22권3호통권93호
• /
• pp.355-362
• /
• 2006

The purpose of this study was to investigate the influences of tangible clues on university students' perceived risks and satisfaction at family-restaurants in Seoul. The performances of 3 tangible clues(physical evidence, employee, service process) negatively influenced the student's perceived risks. This result indicated that tangible clues can reduce the negative characteristics of service (intangibility, inseparability, perishability and variability) toward student customers at family restaurants. Meanwhile, financial risk, performance risk and social risk negatively influenced their overall satisfaction. Performance risk had the strongest negative influence on student customers' overall satisfaction, indicating that university students were much more interested in performance and utility about menu, food and service quality than in other factors at family restaurants. As a result, food-service corporations need to manage suitably various tangible clues as an important marketing strategy to diminish their customers' perceived risk and raise their satisfaction.

• Plant Biotechnology Reports
• /
• 제5권1호
• /
• pp.1-7
• /
• 2011

Secondary walls have recently drawn research interest as a primary source of sugars for liquid biofuel production. Secondary walls are composed of a complex mixture of the structural polymers cellulose, hemicellulose, and lignin. A matrix of hemicellulose and lignin surrounds the cellulose component of the plant's cell wall in order to protect the cell from enzymatic attacks. Such resistance, along with the variability seen in the proportions of the major components of the mixture, presents process design and operating challenges to the bioconversion of lignocellulosic biomass to fuel. Expanding bioenergy production to the commercial scale will require a significant improvement in the growth of feedstock as well as in its quality. Plant biotechnology offers an efficient means to create "targeted" changes in the chemical and physical properties of the resulting biomass through pathway-specific manipulation of metabolisms. The successful use of the genetic engineering approach largely depends on the development of two enabling tools: (1) the discovery of regulatory genes involved in key pathways that determine the quantity and quality of the biomass, and (2) utility promoters that can drive the expression of the introduced genes in a highly controlled manner spatially and/or temporally. In this review, we summarize the current understanding of the transcriptional regulatory network that controls secondary wall biosynthesis and discuss experimental approaches to developing-xylem-specific utility promoters.

• 말소리와 음성과학
• /
• 제11권4호
• /
• pp.63-70
• /
• 2019

This study investigated individual variability of L2 learners' categorical judgments of L2 stops by exploring English learners' perceptual processing of two acoustic cues (voice onset time [VOT] and f0) and working memory capacity as sources of variation. As prior research has reported that English speakers' greater use of the redundant cue f0 was responsible for gradient processing of native stops, we examined whether the same processing characteristics would be observed in L2 learners' perception of Korean stops (/t/-/t^h/). 22 English learners of L2 Korean with a range of L2 proficiency participated in a visual analogue scaling task and demonstrated variable manners of judging the L2 Korean stops: Some were more gradient than others in performing the task. Correlation analysis revealed that L2 learners' categorical responses were modestly related to individuals' utilizations of a primary cue for the stop contrast (VOT for L1 English stops and f0 for L2 Korean stops), and were also related to better working memory capacity. Together, the current experimental evidence demonstrates adult L2 learners' top-down processing of stop consonants where linguistic and cognitive resources are devoted to a process of determining abstract phonemic identity.

• 한국의류학회지
• /
• 제37권3호
• /
• pp.247-259
• /
• 2013

This study conceptually approaches and clearly compares the similarities and differences of fashion and architecture through a focus on their correlations. This study identifies the conceptual definitions of functional minimalism by an examination of function that represents the largest similarity between architecture and fashion. This study classifies the nature of functional minimalism and studies cases for each architectural classification in the areas of: the simplicity of a structure, unitarity pursuit of economic value, repeatability in an efficiency unit, reducibility stressing property, and multi-functional spatiality. The characteristics of functional minimalism fashion are distinguish as: simplicity in a structure that highlight structural lines in non-decorated design, unitarity pursuit of economic value represented in united process and pattern for its economic effect, repeatability in an efficiency unit represented through the repeated decoration of a functional unit, reducibility stressing a property that emphasizes property with a dominant design element through a highlight of the characteristics of materials and multi-functional spatiality that represents variability in clothes through an expansion of limited spatial function. This study approaches each discipline with a clear understanding of the differences between the two and suggests standards for a comparative study of architecture and fashion.