• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.711-713
• /
• 2004

In the past time, the protection relay did only a protection function. Currently, its upgraded device i.e. IED(Intelligent Electric Device) has been designed to protect, control, and monitor the whole power system automatically. Also the device is desired to successfully measure important elements of the power system. This paper considers design method of a digital protection IED with a function of measuring various elements and a communication function. The protection IED is composed of the specific function modules that are signal process module, communication module, input/output module and main control module. A signal process module use a DSP processor for analysis of input signal. Main control module use a embedded processor, Xscale, that has an ARM Core. The communication protocol uses IEC61850 protocol that becomes standard in the future. The protection IED is able to process mass information with high-performance processor. As each function module is designed individually, the reliability of the device can be enhanced.

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.118-128
• /
• 1998

Finite element analyses are carried out to provide results usable in the design of airbag module that consists of inflater, cushion, cover, mounting plate, etc. In the first phase, a deployment process of airbag module is analyzed to evaluate the pressure waveform of developed airbag and deployment characteristics, and is compared with the test results. Interaction between head form and inflated airbag module is investigated in the second phase. In the last stage, sled test with rigid dummy, airbag midule, driving system and car interior part are simulated to investigate the influence of airbag design factor on the behavior of dummy with seat belt. The procedures can be provided as a guideline for airbag module design and improvement of airbag module performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1338-1340
• /
• 1987

This paper describes the design of ECG data preprocess module for the ECG signals. This module process the data obtained from two channels. It is composed of the AID converter, QRS detector, one chip micro-computer and memory. This module performs the following functions;digital filtering, R wave detection and determination of reference point for the ST segment. The measured points are transfered to the next data module by the interrupt process. This preprocessor data module is available to the basis for the parallel data processing for the real time automatic diagnosis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.918-923
• /
• 2007

Currently, automotive industries improve the vehicle performance and reduce the development period of vehicle using each module part for the high quality and performance of vehicles. However each component part doesn't generate the noise and vibration problems, sometime these problems are generated on the assembly status between vehicle chassis frame and each module part. On this study, in order to analysis the dynamic characteristics of a shield door module that is a typical module part of vehicles, the acquisition and evaluation process about the vibration and noise of shield door module is developed. Also the possibility to apply to shield door module of the developed process is verified by the comparison with the dynamic characteristics between plastic and steel module plate.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.89-92
• /
• 1997

The objective of this paper is to provide an alternative framework for the integration of process planning and scheduling in cellular manufacturing. The concept of an integrated cellular manufacturing system is defined and the system architecture is presented. In an integrated cellular manufacturing system, there are three modules : the process planning module, the manufacturing-cell design module, and the cell-scheduling module. For each module, the tasks and their activities are explained.

• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.102-107
• /
• 2000

This study describes computer-aided design system for stepped asymmetric forgings. To establish the appropriate process sequence, an integrated approach based on a rule-base system was accomplished. This system has four modules, which are undercut prevention module, shape cognition module, 3D modelling module and corner/fillet correction module. These modules can be used independently or at all. The proposed shape cognition method could be widely used in forging design of asymmetric parts.

• 멤브레인
• /
• 제18권1호
• /
• pp.1-6
• /
• 2008

아크릴 폐수를 응집-여과-중화의 전처리 공정에 적용하여 막오염 인자를 최소화 한 후 UF/RO 공정에 적용하였다. 막의 형태 및 종류에 따라 한외여과 및 역삼투 모듈을 조합을 이루어 전처리 수를 온도 및 압력변화에 따라 적용하여 분리 특성을 고찰하였다. 투과 플럭스는 모듈 set 1의 UF모듈보다 모듈 set 4의 UF모듈의 투과량이 약 $2{\sim}3$배 더 많이 배출됨을 확인하였다. 최종적인 투과량은 관형모듈과 조합을 이룬 모듈 set 2와 모듈 set 3이 좋은 결과를 나타내었다. 모든 UF 모듈에서 TDS, T-N 및 COD의 제거 효율은 온도 및 압력변화에 영향을 받지 않고 제거 효율 또한 낮음을 알 수 있었다. RO모듈에서 TDS, T-N 및 COD가 우수한 제거 효율을 보였다. 아크릴 폐수의 최종적인 수질결과는 공장폐수의 배출 허용기준을 만족하였고, 막모듈 조합은 폐수의 재활용 가능성을 확인할 수 있었다.

• 대한산업공학회지
• /
• 제19권2호
• /
• pp.119-132
• /
• 1993

This paper deals with the development of an expert process design system interfaced with CAD for porismatic parts in injection mold manufacture. The developed CAD/CAPP system consists of two modules such as CAD interface module and process design module. Parts are represented using AutoCAD system on the IBM PC/AT. CAD interface module recognizes form features and manufacturing features of the part using form feature recognition algorithm and manufacturing feature recognition rule base. Process design module selects operations and determines machine tools, cutting tools and operation sequencing by using knowledge base which is acquired from expert process planners. A case study is implemented to evaluate feasibilities of the function of the proposed system. The CAD/CAPP system can improve the efficiency of process design activities and reduce the time required for process design.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.88-101
• /
• 1998

In this paper, module of a product is determined by the characteristics of a product itself and art assembly process. To analyze the characteristics o( the product, assembly function, structure of subassembly and parts could be considered. Based on the analysis of characteristics of product structure, assembly process and product function, determination criteria of a module could be proposed. For the assembly process, assembly methods, assembly equipment and workers could be considered. For the product structure, constituent object and structural feature could also be considered. To obtain the interrelationship between the product and the assembly process, the matrix table could be used to find the influencing factors that affected the module.

• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.327-332
• /
• 2008

본 논문에서는 반도체 소자와 디스플레이 패널의 제조공정에 사용되는 플라즈마 식각장비의 RF 정합특성을 개선하기 위한 모듈을 제안하였다. 구동부의 기구 중 베벨기어를 웜기어로 새롭게 설계 제작하고 제어부도 원칩 마이크로 프로세서를 이용하여 재구성하였다. 개발된 모듈은 기존의 정합장치보다 다양한 공정변수에 대한 능동적인 대처가 가능하고, 모터의 흐름현상 등을 개선함으로서 RF 정합특성이 개선되어, 플라즈마 식각공정의 생산성을 향상시킬 수 있음을 보였다.