• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.159-164
• /
• 2001

An extensive range of pumping facilities are employed in the regional water supply system in metropolitan areas, and optimization and the systematic combination of the pump facilities have direct bearing on the stability and economy of the water supply system concerned. These systems must be able to guarantee stability, efficiency and offer high reliability. Preparation of metropolitan area regional water supply system construction project must include a basic plan which takes into account the suitability of pumping facilities to be used, the environment in which facilities will be installed, man-power requirements and basic operational and management policies. This paper contains over-all analysis of the management of metropolitan area regional water supply systems and highlights the cause of Inefficiency and energy waste and puts forward a remedial plan of action. In addition, pump/motor specification programs were developed using Visual Basic to assist selection of the same.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.599-603
• /
• 2003

This paper present an error compensation system and On-Machine Measurement(OMM) system for improving the machining accuracy of ultra-precision lathe. The Fast-Tool-Servo(FTS) driven by a piezoelectric actuator is applied for error compensation system. The controller is implemented on the 32bit DSP for feedback control of piezoelectric actuator. The control system is designed to compensates three kinds of machining errors such as the straightness error of X-axis slide, the thermal growth error of the spindle. and the squareness between spindle and X-axis slide. OMM is preposed to measure the finished profile of workpiece on the machine-tool using capacitive sensor with highly accurate ruby tip probe guided by air bearing. The data acquisition system is linked to the CNC controller to get the position of each axis in real-time. Through the experiments, it is founded that the thermal growth of spindle and tile squareness error between spindle and X-axis slide influenced to machining error more than straightness error of X-axis slide in small travel length. These errors were simulated as a sinusoidal signal which has very low frequency and the FTS could compensate the signal less than 30 m. The implemented OMM system has been tested by measuring flat surface of 50 mm diameter and shows measurement error less than 400 mm

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.788-792
• /
• 2003

Rotating machines are widely used in industrial world and especially motor and generator take up much part of it. As for this kind of motor and generator, electrical loss due to eddy current is the very important factor and that is also a primary factor causes heat generation. To solve this kind of problem like the above. insulated laminating silicon steel sheet is used to prevent eddy current effect. Laminated rotor is widely used as rotating shaft of motor and generator. Due to that, electrical loss and heat problem can be solved but designer meets another problem. In general. most of the motor and generator can be normally operated under 3,600 rpm because they are designed to have the first critical speed more than that speed. But nowadays, they should be operated more than the first critical speed as usual with the trend of high speed, large scale and high precision in industrial world. The critical speed can be determined from the inertia and stillness for the rotor and bearing of rotating systems. The laminated rotor stiffness can be hardly determined because it can be derived a lot factors for instance rotor material and shape, lamination material and shape, insulation material. lamination force and so on. In this paper, the change of the natural frequency of the motor was examined with the change of the lamination force as an experimental method and design criteria will be presented for motor & generator designer, who can apply the result of numerical analysis with equivalent diameter scheme with ease.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.146-146
• /
• 2017

The pod shattering or dehiscence is essential for the propagation of pod-bearing plant species in the wild, but it causes significant yield losses during harvest of domesticated crop plants. Identifying novel molecular makers, which are linked to seed-shattering genes, is needed to employ the molecular marker-assisted selection for efficiently developing shattering-resistant soybean varieties. In this study, a genetic linkage map was constructed using 115 recombinant inbred lines (RILs) developed from crosses between the pod shattering susceptible variety, Keunol, and resistant variety, Sinpaldal. A 180 K Axiom(R) SoyaSNPs data and pod shattering data from two environments in 2001 and 2015 were used to identify quantitative trait loci (QTL) for pod shattering. A major QTL was identified between two flanking single nucleotide polymorphism (SNP) markers, AX-90320801 and AX-90306327 on chromosome 16 with 1.3 cM interval, 857 kb of physical range. In sequence, genotype distribution analysis was conducted using extreme phenotype RILs. This could narrow down the QTL down to 153 kb on the physical map and was designated as qPDH1-KS with 6 annotated gene models. All exons within qPDH1-KS were sequenced and the 6 polymorphic SNPs affecting the amino acid sequence were identified. To develop universally available molecular markers, 38 Korean soybean cultivars were investigated by the association study using the 6 identified SNPs. Only two SNPswere strongly associated with the pod shattering. These two identified SNPs will help to identify the pod shattering responsible gene and to develop pod shattering-resistant soybean plants using marker-assisted selection.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.19-19
• /
• 2017

The indica ${\times}$ japonica rice (Oryza sativa L.) cultivars released in Japan since 1980 are high-yielding. However, occasionally in these cultivars their high yield potentials cannot be realized, particularly depending on climate conditions. The objectives of this study were to identify the reason for yield instability and the critical yield component factor causing lower grain yield in these high-yielding cultivars. Standard-yield japonica, high-yielding japonica-dominant, and indica-dominant cultivars were grown in western Japan. Rough grain yield (RY) in these high-yielding cultivars ranged from 450 to $980g\;m^{-2}$, and was positively correlated with potential grain yield (PRY). By fluctuations of solar radiation, RY changed with spikelet number (SNO), and SNO was correlated with cumulative radiation during the panicle formation period of 30 days before heading. Even if higher SNO was achieved under higher radiant conditions, RY was lower than PRY. The lower grain-filling in plants bearing higher SNO resulted from a lower filling percentage of spikelets (%F, RY/PRY), and %F was strongly correlated with spikelet fertility (%S) across all cultivars. %S was highly influenced by cumulative radiation per PRY during pollen development and establishment around heading. Inhibition of assimilation by leaf removal lowered %S. Conversely, stem thinning and removal of upper panicles around heading increased %S in spikelets of the lower part of the panicle in which sterility was higher. These results suggest that limitation of assimilate-supply due to low irradiance at the spikelet-formation and flowering stages restrains the potential of the high-yielding cultivars, depending on reduction of SNO and %S, respectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.618-622
• /
• 2004

The vibration test system of SITC(Satellite Integration and Test Center) at KARI(Korea Aerospace Research Institute) has been used successfully for the environmental tests of a majority of korean space programs, such as KOMPSAT, Koreasat KITSAT, STSAT and KSR program since 1996. To meet the recent needs of large size test facility available for the vibrational tests of the huge launch vehicles and tole-communication satellites which will be developed in the near future, KARI undertook to construct the large size multi-electromagnetic shaking system with 3 $\times$ 3m head expander system. The new system will consist of three electromagnetic shakers which has 160 kN thrust force individually, and be able te sustain up to 8 tons test load and 300 kNm overturing moment. And to avoid the tremendous cost and effort to furnish the seismic block with large size and weight, it will adopt a Lin-E-Air type configuration with which the seismic block is less severe than a Solid-Truninon type. In addition, to fulfill the strong requirement of high overturning moment the additional guidance system including a central bearing system on a central support and several pad bearings around the head expander body is now considered. This paper describes the configuration and the design parameters of the multi-shaking system which is under development by KARI's engineers.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.285-293
• /
• 2004

Oxidation behavior of 304 and 430 stainless steel were studied using thin film X-ray analysis and glow discharge spectrum analysis (here-after GDS). The oxidation layer of 304 stainless steel was composed of $Cr_2O_3\;and\;FeCrO_4$ and its thickness was about $1.5{\mu}m$ after $1\~5$ minutes of annealing at $1120^{\circ}C$ open air. However, the oxidation layer of 430 stainless steels was mainly composed of $Cr_2O_3$ and its typical thickness was 0.5um after $1\~5$ minutes of annealing at $1000^{\circ}C$ open air. Electro-chemical analysis revealed that the descaling of oxidation layer could be activated by Fe, Cr dissolution from the matrix behind the oxidation layer at the current density of $5\~10ASD$ and by Fe, Cr-oxide dissolution from the oxidation layer at the current density over than 10ASD. Electrolytic stripping of 430 and 304 revealed the intial incubation period of descaling by oxygen evolving at low current density range such as $5\~10ASD$. However the dissolution of oxide layer was occurred when applying the anodic current of $10\~20ASD$ on 430 and 304 stainless steels. It was suggested that the electrolytic pickling of high Cr bearing stainless steel such as 430 and 304 seemed to be the more effective in the high current density range such as $10\~20ASD$ than the low current density range such as $5\~10ASD$.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.63-63
• /
• 2010

The pre-heat free consumables for GMAW, SAW and FCAW processes that matches the Cu-bearing PFS-700 steel which has yield strength over 700MPa were developed and evaluated to see the suitability in military such as submarine and battle ship. Explosion bulge test in underwater was developed and applied to see the reliability of welded structure. All welding was conducted without pre-heat before welding, the interpass temperature was below $150^{\circ}C$ for all welding conditions. Tensile strength for the weld metal in GMAW, SAW and FCAW process is 887MPa, 875MPa and 813MPa, respectively, these values are similar to the base metal of PFS-700 steel of 838MPa. EBT results in GMAW, SAW and FCAW show 14.0%, 14.02% and 15.9% reduction of thickness without generation of crack, respectively and stand-off distance was set up properly to have over 14.0% reduction of thickness. Through EBT results, the developed new consumables are applicable to the weapon systems such as submarine and battle ship.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.195-199
• /
• 2002

This study is for know chemistry of the representative soils from Keumsan, its relationships with dissolved compositions, and its absorption relationships within the flora. It has been done for two comparisons: 1) phyllite, shale and granite(PSG), and 2) granite and coal bearing shale(GC). Among the soil leachate of the PSG, cations are mainly low in the phyllite area while anions are mainly low in the granite area. In the soil compositions, Ca and Mg of the beans are high and Na is high in the granite area while Ca and Na of the perilla are high in the granite area and Mg is high in the phyllite area. In th both species, Na for the granite area and Mg for the phyllite area are high while Ca for the shale area is low. Among the flora, shale area shows low Ca and Mg contents while granite area shows slightly high Na contents, regardless the species. Compared with beans, perilla is low in the Mg and high in the Na contents. These relationships show that the contents of the soil leachate do not reflect absorption within the flora. Among the soil leachate of the GC, shale area is high in the most of the elements. Especially, SO$_4$ is over 15 times high In the phyllite area. In the soil, granite area shows high Ca, Na and low Mg contents. In the flora, the Miscanthus sinensis shows high Ca and Mg contents in the granite area while the Artemisia vulgaris shows high Ca, Ca and Mg contents in the shale area. These relationships for contents of the flora and soil leachate suggest that the flora has a different absorption according different species.

• 한국중재학회지:중재연구
• /
• 제17권2호
• /
• pp.141-165
• /
• 2007

This study aims to make a contribution to the promotion of trade and economic development of South Korea, and, at the same time, call attention to the increasing trend of investment agreements concluded within Free Trade Agreements (FTA) by examining theoretically FTAs and dispute resolution and investigating systematically the conclusion procedure of agreements, and the system, institutions, and jurisdiction of dispute resolution, and presenting these findings to the government and investors involved. The most problematic aspect in the legal process of arbitration involving disputes over investment is that of arguments concerning the right of jurisdiction. When a dispute arises, even though an investor files for arbitration at an ICSID institution, the parties become involved in another energy-consuming argument even before proceeding to the hearing and decision of the original plan in cases in which the respondent of the dispute files an objection to the decision rights of the arbitral tribunal. As the main basis for this type of plea, the point of non-existence of jurisdiction is first raised where the applicable dispute does not fall under the range of investments defined in individual investment contracts or investment agreements such as a Bilateral Investment Treaty (BIT). To avoid an open-ended definition of investment for the range of investments, articles concerning investments in the FTA and NAFTA between Canada and the USA adopt the limited closed-list method. Article 96 of the FTA between Japan and Mexico applied the same abovementioned method of limited form of definition regarding range of investments and concluded BITs between member countries of APEC applied a similar method as well. Instead of employing the previously used inclusive definition, the BITs concluded between countries of Latin America and the USA are equipped with limited characteristics of an investment. Furthermore, to correspond with this necessary condition the three following requirements are needed : 1) fixed investment funding; 2) expected profits resulting from such investments; 3) and the existence of fixed risk bearing.