• Architectural research
• /
• v.20 no.4
• /
• pp.103-108
• /
• 2018

Wandering behavior is a serious problem among the elderly in nursing homes, yet it has received relatively little study As multi-family houses built before the '80s in South Korea were designed, it did not take account into issues related to parking so that at present parking became a big issue. The Seoul Metropolitan Government tried various ways to sort out the parking problem in multi-family house areas, but inadequate parking and illegal parking are still an ongoing problem. Thus, the purpose of this study was to examine current situation on resident parking only and illegal parking centered on a congested area of multi-family houses in Seoul and present the improvement plan of parking problems through case investigation home and abroad. As the result of the survey, it has been identified that the subject area consists of 506 households in total and 186 parking spaces and also, 100 cars in parking space or parking lot in housing space and 143 in illegal parking. Green parking business and open access parking system were suggested as solution plan for parking problem. Thus, it is expected that through green parking business for 6 houses and the parking lot of elementary schools around, the illegal parking problem would be sorted out.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.8
• /
• pp.23-30
• /
• 2018

A necessity of increasing the energy efficiency of the buildings is rising due to global warming and high energy demands prices. Commissioning is an effective way to increase the energy efficiency of the building and reduce maintenance costs. In this study, a case study was conducted to derive the commissioning process of green building and propose management factors that can be used in domestic commissioning projects. The case was a university renovation project that received a LEED Glod certification and conducted the enhanced commissioning. The commissioning is divided into planning, design, construction, and post-construction phases. In the planning stage, commissioning company selection, commissioning goal setting, tasks and responsibilities for each subject are set. In the design phase, preparations are made for inspection and construction steps to prevent design errors. In the construction phase, problems are solved through periodic on-site inspections. In the post-construction phase, a final report with all the details of the commissioning will be created and future maintenance strategies will be proposed. Based on the findings of this study, it will be a basis for the management factors that can be used in the implementation of domestic commissioning projects.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.5
• /
• pp.165-176
• /
• 2012

The objective of this study is to set urban ecosystem assessment indicators, assess the status of the urban ecosystems in 31 cities & counties in the capital region and based on which, to examine an improvement plan to resolve problems and raise quality and quantity of urban ecosystems. The study showed that the ecological base of 31 cities & counties was 48% on average, which indicates that their ecological property is the middle class. Their natural-ecological function was 63% and environmental-control function was 25%, showing that environment-control function was poor. Therefore, going forward, urban ecological base should be further improved. When securing an ecological base, creation techniques should be able to further enhance environmental-control function along with natural-ecological function. Also, additional effort should be made to conserve areas with high ecological value as much as possible and increase vegetation vitality by replacing tree species.

• Journal of the Korean Ceramic Society
• /
• v.49 no.6
• /
• pp.592-600
• /
• 2012

Conventional methods for preparing ceramic bodies, such as cold isostatic pressing, gypsum-mold slip casting, and filter pressing are not completely suitable for fabricating large and thick ceramic plates owing to disadvantages of these processes, such as the high cost of the equipment, the formation of density gradients, and differential shrinkage during drying. These problems can be avoided by employing a pressure-vacuum hybrid slip casting approach that considers not only by the compression of the aqueous slip in the casting room (pressure slip casting) but also the vacuum sucking of the dispersion medium (water) around the mold (vacuum slip casting). We prepared the alumina formed bodies by means of pressure-vacuum hybrid slip casting with stepwise pressure loading up to 0.5 MPa using a slip consisting of 40 vol% solid, 0.6 wt% APC, 1 wt% PEG, and 1 wt% PVA. After drying the green body at $30^{\circ}C$ and 80% RH, the green density of the alumina bodies was about 56% RD. The sintered density of an alumina plate created by means of sintering at $1650^{\circ}C$ for 4 h exceeded 99.8%.This method enabled us to fabricate a $110{\times}110{\times}20$ mm alumina plate without cracks and with a homogeneous density, thus demonstrating the possibility of extending the method to the fabrication of other ceramic products.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.2
• /
• pp.41-55
• /
• 2005

In an effort to preserve biodiversity in increasingly fragmented green patches, Korea has been installing eco-corridors over or under some arterial or expressways. In a survey of 43 such eco-corridors installed up until the year 2003, some problems and issues were identified. Some selected overseas eco-corridors were also investigated to find implications for the improvements of future installations in Korea. Major findings are; - For most existing eco-corridors, target species are not specified and locations of the eco-corridors are not well considered, and consequently it is questionable if wildlifes are crossing them - Most of existing eco-corridors lack supporting facilities such as fences that guide wildlife to cross them and prevent them from running into the road - Planting on the eco-corridors is not sufficient, not diverse enough in species, and not very considerate of wildlife but designed and planted in a similar manner as in urban parks - Where target species are not well specified, the location, width, cross section, and other aspects of the eco-corridors can not be optimized - It is suggested that eco-corridors are planned at early stages of road planning so that the number and locations of eco-corridor(s) decided as necessary and even the alignment and design of roads consider the installation of eco-corridors in advance - Monitoring of wildlife crossings is needed for improved eco-corridor planning and design - Nationwide green network plan is desirable to be made first and eco-corridors fit into it.

• Journal of the Korean Ceramic Society
• /
• v.50 no.2
• /
• pp.142-148
• /
• 2013

Conventional cold isostatic pressing, slip casting, and filter pressing are not completely suitable for fabricating large plates because of disadvantages such as the high cost of equipment and formation of density gradient. These problems could be avoided by employing pressure-vacuum hybrid slip casting (PVHSC). In the PVHSC, the consolidation occurs not only by the compression of the slip in casting room, but also by vacuum sucking of the dispersion medium around the mold. We prepared the alumina bodies by the PVHSC in a static- or stepwise-pressure manner for loading up to 0.5 MPa using an aqueous slip. The green bodies were dried at $30^{\circ}C$ with 40 ~ 80% relative humidity. Under static pressure, casting induced a density gradient in the formed body, resulting in cracking and distortion after the firing. However, the stepwise pressure loading resulted in green bodies with homogeneous density, and the minimization of the appearance of those defects in final products. Desirable drying results were obtained from the cast bodies dried with 80% RH environment humidity. When sintered at $1650^{\circ}C$ for 4 h, the alumina plate made by stepwise-pressure casting reached full density (> 99.7% relative density).

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.375-386
• /
• 2014

Carbon dioxide ($CO_2$) is a green-house gas which causes the global warming problems. Anthropogenic emissionspredominantly from the combustion of coal, oil, and natural gas in electricity generations are expected to increase continuously in the future, resulting in increased $CO_2$ concentration in the atmosphere. In this study, we investigated materials properties and process systems for $CO_2$ separation with an emphasis of the post-combustion process.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.6
• /
• pp.665-672
• /
• 2012

Interfacial cracks bonded with dissimilar transversely isotropic piezoelectric media that are subjected to combined anti-plane mechanical and in-plane electrical loading are analyzed. The problem is formulated using complex function theory, from which the Hilbert problem is derived. By solving the Hilbert problem, the general form solution is obtained. Using this solution, closed-form solutions for one or two finite cracks as well as a semi-infinite crack are obtained, for the problem in which one concentrated mechanical and electrical load is imposed on the crack surface. This solution could be used as a Green's function to generate solutions to other problems with the same geometry but different loading conditions.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.1
• /
• pp.81-90
• /
• 2016

The Agricultural Systems Application Platform (ASAP) provides bottom-up modelling and simulation environment for agricultural engineer. The purpose of this study is to expand usability of the ASAP to the second order partial differential equations: elliptic equations, parabolic equations, and hyperbolic equations. The ASAP is a general-purpose simulation tool which express natural phenomenon with capsulized independent components to simplify implementation and maintenance. To use the ASAP in continuous problems, it is necessary to solve partial differential equations. This study shows usage of the ASAP in elliptic problem, parabolic problem, and hyperbolic problem, and solves of static heat problem, heat transfer problem, and wave problem as examples. The example problems are solved with the ASAP and Finite Difference method (FDM) for verification. The ASAP shows identical results to FDM. These applications are useful to simulate the engineering problem including equilibrium, diffusion and wave problem.

• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.655-662
• /
• 2013

Recently, by the problems owing to utilization of fossil fuel, various green energies receive attention. Wind, the impetus for the wind power generation as one of the green energies, is observed higher quality value in the offshore than onshore. Also, the development of offshore wind turbines is in the spotlight as alternative to solve the problems of onshore wind farm such as securing sites, noise, and electromagnetic waves, and to get efficient wind energy. Therefore, the many researches on offshore wind energy have been carried out. As wind towers are advanced to ocean, offshore wind towers have been enlarged. Thus, stability is required to endure wind force and wave force. In this study, the external forces act on the foundation in multi-layered are calculated by p-y relation.