• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.485-495
• /
• 2017

A development of underground space is very useful solution to slove problem occurred from ground surface enlargement in urban areas due to the growth of population, tunnelling is the most popular way and widely used. Researches regarding tunneling-induced pile-soil interactive behaviour have been conducted by many researchers. A study on pile axial force distribution due to tunnelling through laboratory model test, however, is being rarely carried out. In this study, therefore, authors investigate ground behaviour due to tunnelling below grouped pile subjected vertical load as well as pile axial force distribution. A concept of volume loss is used to express tunnel excavation, which is normally applied to 1~2% for tunnelling in soft ground. In this study, however, 10% of that applied to investigate failure mechanism. As a result of laboratory model test, a decrease of pile axial force occurs at 1.5% of volume loss, settlement of grouped pile is 1.2~4.7 times greater than the adjacent ground surface one. Ground deformations at 1.5% of volume loss are measured using Close Range Photogrammetry and compared with results from numerical analysis.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.51-61
• /
• 2016

New building methods are needed to aid increased inner-city redevelopment and industrial construction. A particular area of improvement is the efficient use of cut slopes, with the minimization of associated problems. A retaining wall of precast panels can resist the horizontal earth pressure by increasing the shear strength of the ground and reinforcing it through contact with the panels. Precast panels allow quick construction and avoid the problem of concrete deterioration. Other problems to be solved include the digging of borrow pits, the disposal of material cut from the slope, and degradation of the landscape caused by the exposed concrete retaining wall.This study suggest the methods of improvement of an existing precast panel wall system by changing the appearance of the panels to that of natural rock and improving the process of adhering the panel to a vertical slope. The panels were tested in the laboratory and in the field. The laboratory test verified their specific strength and behavior, and the field test assessed the panels' ground adherence at a vertical cutting. Reinforcement of the cutting slope was also measured and compared with the results of 3D numerical analysis. The results of laboratory test, identified that the shear bar increase the punching resistance of panel. And as a results of test construction, identified the construct ability and field applicability of the panel wall system adhered to in-situ ground. In addition to that, extended measurement and numerical analysis, identified the long-term stability of panel wall system adhered to in-situ ground.

• Journal of Educational Research in Mathematics
• /
• v.23 no.2
• /
• pp.253-267
• /
• 2013

The newly revised mathematics curriculum of 2007 speaks of ultimate goal to develop ability to think and communicate mathematically, in order to develop ability to rationally deal with problems arising from the life around, which puts emphasize on mathematical communication. In this study, analysis on mathematical communication and analogical thinking process of group of students with similar level of academic achievement and that with different level, and thus analyzed if such communication has affected analogical thinking process in any way. This study contains following subjects: 1. Forms of mathematical communication took placed at the two groups based on achievement level were analyzed. 2. Analogical thinking process was observed through trapezoid's area obtaining activity and analyzed if communication within groups has affected such process anyhow. A framework to analyze analogical thinking process was developed with reference of problem solving procedure based on analogy, suggested by Rattermann(1997). 15 from 24 students of year 5 form of N elementary school at Gunpo Uiwang, Syeonggi-do, were selected and 3 groups (group A, B and C) of students sharing the same achievement level and 2 groups (group D and E) of different level were made. The students were led to obtain areas of parallelogram and trapezoid for twice, and communication process and analogical thinking process was observed, recorded and analyzed. The results of this study are as follow: 1. The more significant mathematical communication was observed at groups sharing medium and low level of achievement than other groups. 2. Despite of individual and group differences, there is overall improvement in students' analogical thinking: activities of obtaining areas of parallelogram and trapezoid showed that discussion within subgroups could induce analogical thinking thus expand students' analogical thinking stage.

• Tunnel and Underground Space
• /
• v.26 no.2
• /
• pp.110-119
• /
• 2016

The purpose of this study is to evaluate the applicability of tailing in the ${\bigcirc}{\bigcirc}$ mine as a grout material. For the purpose, XRD analysis was performed for mineralogical properties of tailing. In addition, flow, velocity, and uniaxial compressive strength tests were carried out for physical and mechanical properties of a grout material with the mixing ratio of cement and tailing and curing periods. By the result of XRD analysis, tailing of the mine was found to mostly consist of quartz, galena, and pyrite. The flow observed by the flow test showed decreasing tendency with increasing the mixing ratio of tailing. The velocity was also lowered with increasing the mixing ratio of tailing regardless of curing periods. The uniaxial compressive strength as well as Young's modulus also show a tendency to decrease with increasing the mixing ratio of tailing independently on the curing periods. Considering only the physical and mechanical properties of a grout material with tailing, the results are considered to be sufficiently used as a grout material. However, since metallic minerals such as galena and pyrite in tailing contents and these are causing environmental contamination, countermeasures should be considered for this problem in future.

• Composites Research
• /
• v.18 no.6
• /
• pp.9-18
• /
• 2005

With the wide applications of fiber-reinforced composite material in aero-structures and mechanical parts, the design of composite joints have become a very important research area because the joints are often the weakest areas in composite structures. This paper presents an analytical study of the stress distributions in mechanically single-fastened and multi-fastened composite laminates. The finite element models which treat the pin and hole contact problem using a contact stress analysis are described. A dimensionless stress concentration factor is used to compare the stress distributions in composite laminates quantitatively In the case of single-pin loaded composite laminate, the effects of stacking sequence, the ratio of a hole diameter and the width of a laminate (W/D ratio), the ratio of hole diameter and distance from edge to hole (E/D ratio), friction coefficient and clamping force are considered. In the case of multi-pin loaded composite laminate, the influence of the number of pins, pitch distance, number of rows, row spacing and hole pattern are considered. The results show that P/D ratio and E/D ratio affect more on stress distributions near the hole boundary than the other factors. In the case of multi-pin loaded composite laminate, the stress concentration in the double column case is better than the other cases of multi-pin loaded composite laminate.

• Journal of Conservation Science
• /
• v.22
• /
• pp.31-42
• /
• 2008

A stone cultural heritage often lacks design drawing and detailed geometric informations, thus it becomes more difficult to conservation and restoration. Even though there is active database of detail shape information and numerical measurement for stone monuments, most of the data is in hard-to-utilize two-dimensional images. The new technology developed to overcome this problem is three-dimensional image scanning system. The multi-storied stone pagoda of the Daewonsa temple was analysed with 3D scanning image data then survey map with orientation displacement was evaluated. The difference of each side became apparent with the members of the stone properties was measured, also horizontal and vertical displacement occurred. Horizontal displacement occurred in increasing severity from left to right and from body section to upper part. The 8th roof stones are leaning toward northwest direction due to lateral displacement. The evaluation and measurement of displacement could cause a little errors due to the characteristics uneven surface of stone monuments, computer program and mistakes from the researcher. In future, more precise measurement and stability studies should be done to suggest that accurate data for conservation and understanding of damage condition can be provided.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.24 no.4
• /
• pp.301-317
• /
• 2013

This study investigated general problems concerning the physical education field in the KDC 6th edition based on comparative analysis of academic characteristics and classification system, and suggested some ideas for the improvements of them. Results of this study are is summarized as follows. First, while the academic classification divided items focusing on theoretical disciplines such as physical education, sociology, or business administration, the library classification divided them into details according to sport entries. Second, We examined the classification status of the physical education field of the collection database in the National Library of Korea. The number of physical education field data was 38,585, and of them, that of books having classification codes starting with 692(physical education, sports) was 22,870. This shows that data actually have been published mainly based on academic characteristics rather than sport entries, which causes a problem due to concentration of many data on one classification code. Therefore, this study analyzed keywords around these classification codes. Third, modified classification of items was basically performed through the academic system of the physical education and the keyword analysis, and the typical KDC classification system was maintained as much as possible.

• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.147-154
• /
• 2007

Network topology in ad hoc networks keeps changing because of node mobility and no limitation in number of nodes. Therefore, the scalability of routing protocol is of great importance, However, table driven protocols such as DSDV have been known to be suitable for relatively small number of nodes and low node mobility, Various protocols like FSR, OLSR, and PCDV have been proposed to resolve scalability problem but vet remain to be proven for their comparative superiority for scalability, In this paper, we compare and amine them by employing various network deployment scenarios as follows: network dimension increase's while keeping node density constant node density increases while keeping network dimension fixed, and the number of sessions increase with the network dimension and the number of nodes fixed. the DSDV protocol showed a low scalability despite that it imposes a low overhead because its convergence speed against topology change is slow, The FSR's performance decreased according to the increase of overhead corresponding to increasing number of nodes, The OLSR with the shortest convergence time among them shows a good scalability, but turned out to be less scalable than the PCDV that uses a clustering because of its relatively high overhead.

• Korean Journal of Poultry Science
• /
• v.41 no.3
• /
• pp.217-225
• /
• 2014

Telomeres are the ends of the eukaryotic chromosomes and consist of a tandem repetitive DNA sequence and shelterin protein complex. The function of telomere is to protect chromosome. Telomere length in somatic cells tends to decrease with organismal age due to the end replication problem. However, several factors at the genetic, epigenetic and environmental level affect telomere length. In this study, we estimated heritability of telomere length and investigated inheritance of telomeres in a chicken. Telomere length of lymphocytes was analyzed by semi-quantitative polymerase chain reaction using telomere primer and quantitative fluorescence in situ hybridization using telomeric DNA probe. In results, heritability of telomere length was estimated 0.9 at birth by offspring-parent regression analysis and was estimated 0.03 and 0.04 at 10 and 30 weeks old, respectively, by parental variance analysis. There was a significant positive correlation in telomere length between father and their offspring (r=0.348), and mother and their offspring (r=0.380). In inheritance patterns of telomere length, the influence of paternal and maternal effect on their offspring was similar. The influence of inherited telomeres on male and female progeny was also roughly alike. These results implicated that imprinting of parental telomere length was regulated by autosomal genes, not sex linked genes. In addition, telomere length of offspring at birth did not differ along with their maternal age. Thus, maternal age does not affects telomere length in their offspring at birth owing to cellular reprogramming at early embryonic stage.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1116-1122
• /
• 2009

ATS(Automatic Train Stop) system makes train stop when it runs over the speed limit and ensure the safe operation of train. Seoul Metro line 2 in Korea, which started its passenger service in 1982, has adopted ATS system for its signaling system. The ATS system has only a train stop function at the time of emergency, and Seoul Metro is planning to replaced them with ATC(Automatic Train Control)/ATO(Automatic Train Operation) system which can provide the dedicated speed control for headway reduction and automatic operation of train. Until all the ATS system is replaced with the new ATC system, both systems are to operate simultaneously at the same metro line. In this situation, ATS system sometimes reveals improper operation: train stops suddenly without any obstacles in front of it. These emergency stops cause interruption of passenger service, and abnormal abrasion of wheels and rail. This paper makes it clear that these interruptions are caused by EMI phenomena between ATS on-board device and ATC wayside device : Signal current flowing in AF track circuit of ATC is turn out to be a EMI source that prevent normal operation of the ATS on-board device. Although the two systems have different frequency-ranges (ATS system has frequency range between $78{\sim}130$[kHz] and ATC system has frequency range between $9.5{\sim}16.5$[kHz]), it turned out that EMI phenomena appears between the both systems. This is investigated by measuring the output signal from ATS on-board device passing over ATC wayside device. The FFT(Fast Fourier Transform) analysis of the signal reveals that AF track circuit signal is transmitted to the ATS on-board device and induce noise causing improper operation. The countermeasures to the EMI phenomena are examined in three ways; blocking EMI transmission, enforcement of EMS (Electromagnetic Susceptibility) of ATS on-board device, and blocking the EMI source. It is suggested that the practical solution be blocking EMI source temporarily, that is breaking AF track circuit signal when the trains with ATS on-board device pass over it. To this purpose, TODS(Train Occupation Detection System) is developed, and has made a success in preventing the EMI problem of Seoul Metro line 2.