• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.11
• /
• pp.1084-1094
• /
• 1991

Upon introducing satellite communication system to korea, one of the important problems to copy with is the effect from the probable intentional interference i. e. jamming. In this paper, we have considered the M any PSK signal and the soft limiter type, which contains hard limiter, nonhnear satellite transponder in environments of uplink tone or noise jamming plus Gaussian noise and downlink Gaussian noise. Using the derived error rate equation, we have evaluated numerically the error performance of BPSK and QPSK system, and shown in figures in terms of upink and downink earner to jamming rater(CJR) and limiting level. From the results we have known that tone jamming effect on the error performance in BPSK and QPSK signals in nonlinear satelhie shnnel become less with increasing the uplink CNR and with decreasing the liniting level. And in a tone jamming, the limiting level affects hardly on the error performance of both BPSK and QPSK signals. When limiting leveri is zero, BPSK and QPSK signals show the best error rate performance.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.378-384
• /
• 2017

In this paper, an efficient short-time Fourier analysis method for the quasi-periodic signals is proposed via an optimal fixed-lag finite impulse response (FIR) smoother approach using a receding horizon scheme. In order to deal with time-varying Fourier coefficients (FCs) of quasi-periodic signals, a state space model including FCs as state variables is augmented with the variants of FCs. Through an optimal fixed-lag FIR smoother, FCs and their increments are estimated simultaneously and combined to produce final estimates. A lag size of the optimal fixed-lag FIR smoother is chosen to minimize the estimation error. Since the proposed estimation scheme carries out the correction process with the estimated variants of FCs, it is highly probable that the smaller estimation error is achieved compared with existing approaches not making use of such a process. It is shown through numerical simulation that the proposed scheme has better tracking ability for estimating time-varying FCs compared with existing ones.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.9
• /
• pp.922-927
• /
• 2013

In this paper, we evaluate the performance of up-link multi-user MIMO systems with SM. The receiver demodulates the received signal using ML method determines the signal which seems to be the most probable after comparing the received signal and all transmitted signal candidates. When transmitting with the same data rate, the SM method shows better performance of bit error rate(BER) than that of the space shift keying(SSK) of the previously proposed multi-user system.

• Journal of Environmental Impact Assessment
• /
• v.19 no.4
• /
• pp.421-429
• /
• 2010

The reliability of the measurement of ambient trace species is an important issue, especially, in background area such as Gosan in Jeju Island. In a previous episodic study, it was suggested that the PM10 measurement result by the gravimetric method(GMM) was not in agreement with the result by the ${\beta}$-ray absorption method(BAM). In this study, a systematic comparison was carried out for the data between 2001 and 2008 at Gosan(GMM and BAM) and Jeju city (BAM) which is near to Gosan. It was found that at Gosan the PM10 concentration by BAM was higher than GMM and the correlation between them was low. The BAM results at Gosan and Jeju city showed similar trend implying the discrepancy at Gosan was not caused by instrumental problem of the BAM at Gosan. Based on the previous studies two probable reasons for the discrepancy are identified; (1) negative measurement error by the evaporation of volatile ambient species at the filter in GMM such as nitrate and ammonium and (2) positive error by the absorption of water vapor during measurement in BAM. There was no heater at the inlet of BAM at Gosan during the sampling period. Based on the size-segregated measurement data, it was identified that the evaporation error was minor, if any. The relationship between the two methods did not vary with the ambient relative humidity. Thus, at present, it is not clear why the discrepancy had been occurring and when using the PM10 data at Gosan, one should be aware the possible errors.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.3-7
• /
• 2006

Indoor localization is getting more and more importance with the increasing demand for location based service. Location based service necessarily requires the information about customers' locations to provide them the right service according to their changing locations. To satisfy that requirement, GPS is used to achieve outdoor localization. However, there is no leading technology to achieve indoor localization. Indoor localization through UWB wave and TDOA algorithm is considered as the most accurate method until now. In implementing that method, configuration of base stations that serve as control points affects the localization accuracy. Thus, this paper discusses about optimal configuration of base stations. The variation in localization accuracy according to spatial relationship between an object and base stations Is mentioned through SEP also.

• Journal of Power System Engineering
• /
• v.4 no.3
• /
• pp.72-80
• /
• 2000

In order to design a stable robust controller, nominal model, and the upper bound about the uncertainty which is the error of the model are needed. The problem to estimate the nominal model of controlled system and the upper bound of uncertainty at the same time is called robust identification. When the nominal model of controlled system and the upper bound of uncertainty in relation to robust identification are given, the evaluation of the validity of the model and the upper bound makes it possible to distinguish whether there is a model which explains observation data including disturbance among the model set. This paper suggests a method to identity the uncertainty which removes disturbance and expounds observation data by giving a probable postulation and plural data set to disturbance. It also examines the suggested method through a numerical computation simulation and validates its effectiveness.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2690-2692
• /
• 2000

In order to design a stable robust controller, nominal model, and the upper bound about the uncertainty which is the error of the model are needed. The problem to estimate the nominal model of controlled system and the upper bound of uncertainty at the same time is called robust identifcation. When the nominal model of controlled system and the upper bound of uncertainty in relation to robust identifcation are given, the evaluation of the validity of the model and the upper bound makes it possible to distinguish whether there is a model which explains observation data including disturbance among the model set. This paper suggests a method to identify the uncertainty which removes disturbance and expounds observation data by giving a probable postulation and plural data set to disturbance. It also examines the suggested method through a numerical computation simulation and validates its effectiveness.

• Smart Structures and Systems
• /
• v.21 no.4
• /
• pp.435-448
• /
• 2018

This paper reports the development of a theoretically rigorous method for permanent way engineers to assess the condition of railway ballast under a concrete sleeper with the potential to be extended to a smart system for long-term health monitoring of railway ballast. Owing to the uncertainties induced by the problems of modeling error and measurement noise, the Bayesian approach was followed in the development. After the selection of the most plausible model class for describing the damage status of the rail-sleeper-ballast system, Bayesian model updating is adopted to calculate the posterior PDF of the ballast stiffness at various regions under the sleeper. An obvious drop in ballast stiffness at a region under the sleeper is an evidence of ballast damage. In model updating, the model that can minimize the discrepancy between the measured and model-predicted modal parameters can be considered as the most probable model for calculating the posterior PDF under the Bayesian framework. To address the problems of non-uniqueness and local minima in the model updating process, a two-stage hybrid optimization method was developed. The modified evolutionary algorithm was developed in the first stage to identify the important regions in the parameter space and resulting in a set of initial trials for deterministic optimization to locate all most probable models in the second stage. The proposed methodology was numerically and experimentally verified. Using the identified model, a series of comprehensive numerical case studies was carried out to investigate the effects of data quantity and quality on the results of ballast damage detection. Difficulties to be overcome before the proposed method can be extended to a long-term ballast monitoring system are discussed in the conclusion.

• Korea journal of population studies
• /
• v.12 no.1
• /
• pp.19-29
• /
• 1989

It is well known that vital statistics is of great importance as basic data for establishing various range of national policies. Especially, vital statistics is important among demographic information for monitoring and evaluating the population policy, for constructing life table, for making population projection, and for studying various aspects of the society. In principle, the production of vital statistics is based on the registration system. It is, however, still observed that there are some limitations in utilizing fully the registration system due to the inherent problems such as problems in its coverage, accuracies and timeliness. Thus, as an alternative, many countries conduct survey on vital statistics in order to supplement the registration system and obtain in-depth data. Korea is no exception in this aspect. The National Bureau of Statistics carries out the so-called Continuous Demographic Survey. This is a kind of multi-round retrospective survey, covering 32, 000 households and having reference period of one month. The survey has also characteristics of multi-subject sample. Thus, surveys on economic activity status of population, house-hold income & expenditure, and social indicators are together conducted with the same sample. It is, however, found that the survey itself tends to have some quality problems. Especially, the quality problems connected with field data collection are summarized as coverage error, non-response error and response error. Although it is inevitable not to be free from these errors, we should make all our efforts to reduce the errors. The probable schemes pointed out in this paper are as follows : 1) the strengthening formal quality control activities, 2) the review of the survey method, i. e., the combining interview method with mail-sending and mail-back method or pick-up method, 3) well documentation for various cases found in every stage of data collection, and 4) the strengthening the analytical activities. It is, also, emphasized that sincerity of planners and interviewers is the most important factor among other things.

• Journal of the Korean Institute of Navigation
• /
• v.7 no.2
• /
• pp.1-45
• /
• 1983

This paper concerns the applications of the Kalman filter to navigation and the develment of computer programs of the navigational calculations. Methods to apply the Kalman filter to celestial fix, fix by cross bearing and cocked hat are proposed, and numerical simulations under various noise conditiions are conducted. The accuracy of the optimal positions obtained by the Kalman filter is compared with that of the fixed positiions by radial error method. In the case of celestial fix, an algorithm to estimate the optimal positions by using the linear Kalman filter is presented. The optimal positions by the Kalman filter are compared with the running fixes and with the most probable positions obtained from a single line of position. It is confirmed that the resutls of the proposed method are more accurate than the others. In practical piloting, bearings are generally measured intermittently and the measurement process is nonlinear. It is, therefore, difficult for us to apply the Kalman filter to fix by cross bearing. In order to be used in such an unfavorable case, the extended Kalman filter is revised and the aplicability of the revised extended Kalman filter is checked by numerical simulation under various noise conditions. In a cocked hat, an inside or outside fix is dependent only upon azimuth spread, if the error of each line of position is assumed to be equal both in magnitude and sign. A new technique of selecting a ship's position between an inside fix and an outside fix in a cocked hat by using fix determinant derived from the equation of three lines of position is also presented. The relations among the optimal position by Kalman filter, incentre (or excentre) and random error centtre of the cocked hat are discussed theoretically and the accuracy of the optimal position is compared with that of the others by numerical simulation.