The purpose of this study is to determine the differences of the conchiolin layer, prismatic layer and nacreous layer deposited within the shell of the freshwater family Unionidae. shether they possess species-specific characteristics and differences of the microstructure of these layers, A Scanning electron microscopic obwervations were conducted on seven species. The results indicate that all species possess thin and homogeneous layers within the periostracum. The prismatic layers of these species were composed of ednsely packed prisms. The prismatic layers of the shell in six species were typical shape of prisms. especially Inio douglasiae and Lamprotual gottschei. But, in Unio douglasiae sinuolatus, it was irregular and oblique prism shape.The nacreous layer of weven unionids characterized by possession of three types by lamillae shape: thin and homogeneous on genus Anodonta(0.4 pm size of lamella), Unio(1.3pm) and Lamprotual (1.7pm), homogeneous in shape and irregular in size of lamillae in Lanceolaria(1.0 pm)and irregulat in shape and size in Solenaia(0.2-0.4 pm). The microstructure of the naceous layer may be useful as a taxonomic character at the generic level.
In this paper, a miniaturized stage with two prismatic-prismatic joints (2-PP) type parallel compliant mechanism driven by piezo actuators is proposed. This stage consists of two layers which are a motion guide layer and an actuation layer. The motion guide layer has 2-PP type parallel compliant mechanism to guide two translational motions, whereas the actuation layer has two leverage type amplification mechanisms and two piezo actuators to generate forces. Since the volume of the stage is too small to mount displacement sensors, the piezo actuators embedding strain gauge sensors are chosen. With the strain gauge-embedded piezo actuators, a semi-control is implemented, which results in hysteresis compensation of the stage. As the results, the operating range of $30{\mu}m$, the resolution of 20 nm, and the bandwidth of 400 Hz in each axis were obtained in the experiments.
A method of generation boundary layer mesh has been presented. This paper describes the generation of semi-unstructured prismatic/tetrahedral meshes for three-dimensional geometries with thin thickness. By of fretting of surface triangle elements prismatic/tetrahedral meshes are generated and using the node relocation method of this research intersected meshes can be efficiently improved. Finally tetrahedral meshes are automatically generated at the rest of the domain. Sample meshes are constructed to demonstrate the mesh generating capability of the proposed algorithm.
통영산 해수양식진주를 광택과 모양에 따라 광택이 좋고 둥근(LR; Luster Round) 진주, 광택이 나쁘고 둥근(LLR; LackLuster Round) 진주, 바로크(LLB; LackLuster Baroque) 진주, 이핵(LTN Lackluster Two Nucleus) 진주로 세분하여 비중 측정, 현미경관찰, X선 회절분석, 주사전자현미경관찰 등을 통해 진주의 광택에 영향을 미치는 요인에 대한 광물학적 연구를 수행하였다. 광택이 좋은 진주는 광택이 나쁜 진주에 비해 비중이 약간 낮았지만 모두 상업적인 진주의 비중 내에 포함된다. 진주층 단면의 두께는 광택이 좋고 둥근 진주는 0.3 mm 정도로 균질한 반면, 광택이 나쁘고 둥근 진주는 각각의 진주층 두께는 균일하나 광택이 좋고 둥근 진주에 비해 두께가 얇다. 이핵 진주와 바로크 진주는 한 진주 내에서도 진주층 두께 편차가 상당히 큰 경향을 보였다. 진주의 표면은 광택이 좋은 진주가 광택이 나쁜 진주에 비해 아라고나이트 결정의 성장선이 좁고 선명하다. 광택이 좋은 진주는 광택이 좋지 않은 진주보다 아라고나이트 결정층의 결함이 적으며 배열이 평행하며 두께가 더 얇고, 표면과 내부에서 두께 차이가 작다. 능주층이 있는 경우 능주층과 진주층에서 아라고나이트 이외에 방해석이 포함되며, 광택이 나쁜 경우 방해석 함량이 매우 높다. 능주층이 없는 진주에서는 광택 여부에 상관없이 방해석이 없고 모두 아라고나이트로 구성되어 있다.
Hollow cylindrical tubes with a prismatic sandwich lining designed to replace the solid cross-sections are studied in this paper. The sections are divided by a number of revolving periodic unit cells and three topologies of unit cells (Square, Triangle and Kagome) are proposed. Some types of multiple-topology designed materials are also studied. The feasibility and accuracy of a homogenization method for obtaining the equivalent parameters are investigated. As the curved elements of a unit cell are represented by straight elements in the method and the ratios of the lengths of the curved elements to the lengths of the straight elements vary with the changing number of unit cells, some errors may be introduced. The frequencies of the first five modes and responses of the complete and equivalent models under an internal static pressure and an internal step pressure are compared for investigating the scope of applications of the method. The lower bounds and upper bounds of the number of Square, Triangular and Kagome cells in the sections are obtained. It is shown that treating the multiple-topology designed materials as a separate-layer structure is more accurate than treating the structure as a whole.
본 연구에서는 마이크로프리즘 방식으로 재귀반사지를 제조하여 기존의 재귀반사 제조방법인 유리구슬을 사용한 캡슐렌즈형 재귀반사지와 특성을 비교하였다. 마이크로프리즘 방식을 이용하여 제조된 재귀반사는 프리즘이 정확하게 배열되어 있으며 깨끗하게 적층되어 있었다. 그러나 유리구슬을 사용한 캡슐렌즈형 재귀반사지는 큰 균열이나 부서짐 없이 뚜렷한 각층을 가지고 있으나 융착 단계에서 약간의 유리구슬이 이탈하는 현상이 발생하였고, 표면이 균일하지 못하였으며 PET층과의 틈이 발생하는 것을 알 수 있었다. 알루미늄 증착 공정, 코팅 공정 및 대량의 유리구슬을 사용하여 제조되는 유리구슬 재귀반사지는 생산단가와 다양한 설비를 요구하는 반면, 마이크로프리즘 재귀반사지는 제조하는 방법은 비슷하나 단순한 공정으로 구성되어 생산 시간 및 단가를 줄일 뿐만 아니라 유리구슬을 사용한 재귀반사지에 비해 뛰어난 휘도와 측면 휘도를 가지고 있어서 보다 선명한 도로표지용 재귀반사지를 제조할 수 있는 특성이 있다.
Electrodes were fabricated based on activated carbon powder BP-20, conducting agent such as Super P, vapor grown carbon fiber (VGCF) and acetylene black (AB), and the mixed binders of flexible poly(vinylidenefluoridehexafluoropropylene) [P(VdF-co-HFP)] and cross linking dispersion agent of polyvinylpyrrolidone (PVP) to increase mechanical strength. According to impedance measurement of the electrode with the addition of conducting agent, we found that it was possible to charge rapidly by the fast steady-state current convergence due to low equivalent series resistance (AC-ESR, fast charge transfer rate at interface between electrode and electrolyte and low RC time constant. The self-discharge of unit cell showed that diffusion process was controlled by the ion concentration difference of initial electrolyte due to the characteristics of Electric Double Layer Capacitor (EDLC) charged by ion adsorption in the beginning, but this by current leakage through the double-layer at the electrode/electrolyte interface had a minor effect and voltages of curves were remained constant regardless of electrode material. We found that the 2.3V/230F grade EDLC would be applied to industrial safety usage such as uninterrupted power supply (UPS) because of the constant DC-ESR by IR drop regardless of discharge current.
This article presents a numerical tool for dimensioning two-threaded fasteners connecting prismatic parts subjected to fatigue tension loads that are coplanar with the screw axis. A simplified numerical model is developed from unidirectional finite elements, modeling the connected parts and screws with bent elements and the elastic contact layer between the parts with springs. An algorithm updating the contact stiffness matrix, calculating forces and displacements at each node of the structure and thus normal stresses in the screws in both static and fatigue is further developed using C language. An experimental study is also conducted in parallel with the numerical approach to validate the developed model assumptions, the numerical model and the 3D finite element results. Since stiffness values for the compressive zones in the parts are analytically difficult to determine, a statistical software method is used, from which a tuning factor is derived for identifying these stiffness values. The method is also applied to set out the influence of each parameter on the fatigue behaviour of each screw. Finally, the developed model will be used to establish a new, sophisticated, fast and accurate tool for dimensioning bolted mechanical structures.
Pomaranzi, Giulia;Pasqualotto, Giada;Zassso, Alberto
Wind and Structures
/
제35권3호
/
pp.213-227
/
2022
The design of a building is a complex process that encompasses different fields: one of the most relevant is nowadays the energetic one, which has led to the introduction of new typologies of building envelopes. Among them, the Permeable Double Skin Façades (PDSF) are capable to reduce the solar impact and so to improve the energetic performances of the building. However, the aerodynamic characterization of a building with a PDSF is still little investigated in the current literature. The present paper proposes an experimental study to highlight the modifications induced by the outer porous façade in the aerodynamics of a building. A dedicated wind tunnel study is conducted on a rigid model of a prismatic high-rise building, where different façade configurations are tested. Specifically, the single-layer façade is compared to two PDSFs, the former realized with perforated metal and the latter with expanded metal. Outcomes of the tests allow estimating the cladding loads for all the configurations, quantifying the shielding effects ascribable to the porous layers that are translated in a significant reduction of the design pressure that could be up to 50%. Moreover, the impact of the PDSFs on the vortex shedding is investigated, suggesting the capability of the façade to suppress the generation of synchronised vortices and so mitigate the structural response of the building.
$SO_2$ 가스 반응제로 사용되는 석회석의 대체 가능 물질로서 굴 패각의 광물학적 화학적 특성을 알아보았다. 생장환경에 따른 굴 패각의 특성을 파악하기 위하여 태안지역 및 통영지역의 굴 패각을 석회석과 비교하였고 추가로 보령 및 여수 지역의 굴 패각을 연구하였다. XRD 분석 결과 굴 패각은 아라고나이트로 구성되어 있는 폐각근 접합 부분 및 인대(ligament) 접합부분을 제외하고 방해석으로 구성되어 있으며 불순물로서 나타나는 해양 퇴적물이 패각 내 표면에 존재하거나 일부 패각 내 포유물 형태로 나타나기도 했다. 불순물 중 하나인 패각 표면의 따개비의 경우도 방해석으로 이루어져 있어 소성에 영향을 주지는 않을 것으로 판단된다. 현미경 관찰을 통하여 굴 패각의 미세구조를 파악할 수 있었다. 패각은 크게 각주층, 진주층, 초크층으로 구성되어 있는데 패각이 가장 큰 통영 굴 패각은 콘키올린(conchiolin)이라 불리는 단백질을 일부 함유하는 각주층과 진주층의 두께가 가장 작았으며 작은 크기의 태안 굴 패각의 경우 각주층과 진주층 두께가 가장 두꺼운 것으로 나타났다. 중간 크기의 패각 크기를 갖는 보령과 여수 굴 패각은 그 층들이 두 패각의 중간정도의 두께를 보여주었다. 이는 계속 바닷물 속에서 양식하는 통영과 조간대에서 공기와 바닷물 속에서 양식하는 태안의 생장 환경 차이로 판단된다. 굴 패각들은 석회석과 달리 상대적으로 높은 인과 황 함량을 보여주는데 이는 패각 내의 단백질에 의한 것이며 패각을 구성하고 있는 세 개의 층은 Mg 함량을 포함하여 일부 상이한 화학성분을 갖고 있기도 했다. 미량성분의 경우 패각의 경우 석회석 보다 Li의 함량이 상대적으로 많았으며 이는 바닷물 성분의 영향을 받았을 것으로 생각된다. 각 산지별 패각에서는 Zn의 함량 변화가 가장 커서 Zn의 함량은 생성환경에 가장 영향을 많이 받는 미량원소로 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.