• 자원리싸이클링
• /
• 제25권2호
• /
• pp.42-48
• /
• 2016

국내 전자 디스플레이 산업의 고도화된 기술과 평판 디스플레이 제품의 글로벌 점유율은 세계 최고 수준이지만 사용 후 버려지는 폐 디스플레이 제품에 대한 재활용 기술 및 재활용 현황은 아직 글로벌 리더 수준에는 못 미치고 있다. 평판 디스플레이 제품의 짧은 순환주기를 고려할 때, 폐 디스플레이 제품의 재자원화는 전 세계적으로 경제와 환경측면에서 이슈가 되고 있다. 본 연구는 향후 폐 LCD (Liquid Crystal Display) 제품 재활용 플랜트에서 활용할 수 있는 재자원화 데이터베이스를 구축하기 위한 기초연구로 40인치와 42인치 크기의 폐 LCD 제품의 분리해체 방법과 해체 모듈과 부품에서 회수 가능한 유용자원의 종류와 구성비를 분석하였다. 폐 LCD 해체 분석결과를 보면 무게비로 플라스틱은 약 22%, PCB (Print Circuit Board)는 약 9%, 패널부는 약 34%, 이 외 금속류를 포함한 기타는 약 35%의 구성비를 가지고 있었다. 본 연구에서 얻어진 폐 LCD 데이터베이스는 폐 제품의 재활용률 향상은 물론 효율적 재자원화를 통한 경제적 해체 공정 시스템을 구축하는데 기여할 것으로 판단된다.

• 분석과학
• /
• 제25권3호
• /
• pp.164-170
• /
• 2012

시아노아크릴레이트 훈증법은 비다공성 표면에 유류된 잠재지문을 현출할 때 효과적이다. 본 연구는, 진공챔버에서 시아노아크릴레이트를 훈증할 때 온도, 습도, 훈증 방법 등이 잠재지문 현출에 미치는 영향을 확인한 후 최적 반응 조건을 찾는데 있다. 진공챔버의 온도가 높을수록 시아노아크릴레이트 증발량은 증가했지만, 지문 융선에서 시아노아크릴레이트의 중합반응은 $30^{\circ}C$에서 가장 잘 일어났다. 상대습도가 40%, 50% 조건에서는 좋은 상태의 지문이 현출되었지만, 30%보다 낮거나 60%보다 높은 조건에서는 지문 융선에서 시아노아크릴레이트 중합반응 속도가 느려졌다. 진공챔버에서 시아노아크릴레이트를 자연적으로 증발시키는 방법보다는 $OMEGA-PRINT^{TM}$ dispersal pads와 수산화나트륨을 포함한 솜을 이용해 시아노아크릴레이트 훈증하는 방법이 효과적이란 사실을 확인할 수 있었다. 진공챔버에서 시아노아크릴레이트 처리시간은 상대습도에 비해 큰 영향을 주지 않았다.

• 펄프종이기술
• /
• 제46권3호
• /
• pp.28-36
• /
• 2014

The kind and the mixing ratio of recovered papers would affect the quality of final recycled paper. In this study, effects of the mixing ratio of various domestic recycled papers (old news print (ONP), old corrugated container (OCC) and coated paper (CP)) on variations in physical properties of paper and its productivity were investigated. When the mixing ratio of CP grade increased, the freeness (CSF) of recycled pulp was increased while paper strength and white water turbidity was decreased. Paper strength was decreased as the percentage of OCC was higher than ONP. When ONP was mixed with OCC, no adverse effect was observed except the increased drainage resistance. It is expected that these results could be utilized as fundamental data to establish regulations for the recovered paper grades according to mixing ratios of different kinds of them.

• 펄프종이기술
• /
• 제39권2호
• /
• pp.25-30
• /
• 2007

Recently the use of web offset printing has been increasing, which can provide high print speed, mass production, and high print quality. However, high speed web offset printing has frequently undergone a blistering problem when the printed paper passes through hot air dryers. Blistering occurs in the middle of the base paper or in the coating layer. This paper focused on the blistering occurring in the base paper. In order to elucidate the effect of pigment ratio on blistering, 6 types of coating color were prepared with varying GCC/clay ratios and printability and blistering were investigated focusing on structure changes in the coating layer. When the clay content in the coating layer was increased, surface roughness and surface strength were decreased and paper gloss was increased. In addition, it was found that the coating layer structure with high clay content, which contains lots of discontinuous pores, hindered water vapors to penetrate out and, as a result, blistering occurred.

• Journal of Biosystems Engineering
• /
• 제38권4호
• /
• pp.287-294
• /
• 2013

Purpose: Greenhouses for a protected horticulture covered with a plastic or glass are easy to have weakness in a heat loss by deterioration, damage, poor construction, and so on. To grasp the vulnerable points of heat loss of the greenhouses is important for heating energy saving. In this study, an on-site heat loss audit and energy consulting system were developed for an efficient energy usage of a greenhouse. Method: Developed system was mounted with infrared thermal and visual cameras to grasp the heat loss from the greenhouse quickly and exactly, and a trial calculation program of heating load of greenhouse to provide farmers with the information of heating energy usage. Results: Developed system could print out the reports about the locations and causes of the heat losses and improvement methods made up by an operator. The mounted trial calculation program could print out the information of the period heating load and fuel cost according to the conditions of greenhouse and cultivation. The program also mounted the databases of the information on the 13 horticultural energy saving technologies developed by the Korea Rural Development Administration and simple economic analysis sub-program to predict the payback period of the technologies. Conclusion: The developed system was expected to be used as the basic equipment for an instructors of district Agricultural Technology and Extension Centers to conduct the energy consulting service for the farmers within the jurisdiction.

• 융합정보논문지
• /
• 제7권6호
• /
• pp.135-141
• /
• 2017

최근 만성질환을 앓고 있는 고령자가 늘어나고 교통사고와 같은 재난이 증대됨에 따라 이와 같은 응급상황에 응급구조사와 의사들이 효율적으로 대응할 필요성이 대두되고 있다. 특히, 만성질환과 치매를 앓고 있던 고령자에게 뇌경색이나 교통사고와 같은 응급상황이 발생하게 되면, 기본적인 자신의 인적정보과 병력을 전달하지 못하여 구조대의 응급처치가 늦어지고 의료정보의 부족으로 병원에서의 효율적인 응급치료도 어렵게 된다. 본 논문에서는 QR 코드를 이용하여 응급 구조사에게는 응급치료에 필요한 최소한의 개인정보와 병력을 전달하고 병원의 응급실 의사에게는 QR 코드와 지문인식을 통해 그동안의 병력 및 치료데이터를 전달함으로써 효율적인 응급처치 및 응급치료가 가능하도록 하였다. 특히 스마트폰의 QR 코드와 개인의 지문을 동시에 활용함으로써 개인정보는 보호하고 권한을 부여받은 의사들만이 병적기록을 확인할 수 있도록 하여 의료정보의 프라이버시 및 보안을 강화했다.

• 대한기계학회논문집B
• /
• 제30권5호
• /
• pp.413-421
• /
• 2006

The bubble dynamics induced by direct laser heating is experimentally analyzed as a first step to assess the technical feasibility of laser-based ink-jet technology. To understand the interaction between laser light and ink, the absorption spectrum is measured for various ink colors and concentrations. The hydrodynamics of laser-generated bubbles is examined by the laser-flash photography. When an Ar ion laser pulse (wavelength 488 nm) with an output power up to 600 mW is incident on the ink solution through a transparent window, a hemispherical bubble with a diameter up to ${\sim}100{\mu}m$ can be formed with a lifetime in a few tens of microsecond depending on the laser power and the focal-spot size. Parametric study has been performed to reveal the effect of laser pulse width, output power, ink concentration, and color on the bubble dynamics. The results show that the bubble generated by a laser pulse is largely similar to that produced by a thin-film heater. Consequently, the present work demonstrates the feasibility of developing a laser-actuated droplet generation mechanism for applications in ink-jet print heads. Furthermore, the results of this work indicate that the droplet generation frequency is likely to be further increased by optimizing the process parameters.

• 한국재료학회지
• /
• 제27권2호
• /
• pp.82-88
• /
• 2017

Ink-jet printing techniques with ceramic ink, which contains ceramic pigments as colorant, are in increasingly use in the ceramic industry. Generally, ceramic pigments that are produced by conventional method show diameters of several micrometers; these micrometer sized particles in the ink-jet printing process can cause undesirable behavior such as print head nozzle clogging. To prevent this problem, a particle size reduction process is required. In this study, CMYK (cyan, magenta, yellow, black) pigments were synthesized via solid state method. Each pigment particle was milled to submicron size by an attrition mill. The effects of micronizing on the morphology, mechanical property, crystal structure and color property of the CMYK ceramic pigments were investigated by field emission scanning electron microscopy (FE-SEM), particle size analysis (PSA), X-ray diffraction (XRD) and CIE $L^{\ast}a^{\ast}b^{\ast}$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권6호
• /
• pp.824-831
• /
• 2014

In this study, structural variations and overlay errors caused by multiple patterning lithography techniques to print narrow parallel metal interconnects are investigated. Resistance and capacitance parasitic of the six lines of parallel interconnects printed by double patterning lithography (DPL) and triple patterning lithography (TPL) are extracted from a field solver. Wide parameter variations both in DPL and TPL processes are analyzed to determine the impact on signal propagation. Simulations of 10% parameter variations in metal lines show delay variations up to 20% and 30% in DPL and TPL, respectively. Monte Carlo statistical analysis shows that the TPL process results in 21% larger standard variation in delay than the DPL process. Crosstalk simulations are conducted to analyze the dependency on the conditions of the neighboring wires. As expected, opposite signal transitions in the neighboring wires significantly degrade the speed of signal propagation, and the impact becomes larger in the C-worst metals patterned by the TPL process compared to those patterned by the DPL process. As a result, both DPL and TPL result in large variations in parasitic and delay. Therefore, an accurate understanding of variations in the interconnect parameters by multiple patterning lithography and adding proper margins in the circuit designs is necessary.

• 한국CDE학회논문집
• /
• 제22권1호
• /
• pp.10-17
• /
• 2017

The recent 3D printing industry has been focusing on developing 3D printers to fulfill the user's need to bring more colorful and realistic outcomes. Several 3D printers have deployed multiple extruders to print different colors. However, this method has a limit on its availability of colors. To solve this, recent research is focused on using mixing chambers to mix the possible colors to provide more color availability. In this paper, we discuss the environment and algorithm behind the development of G-code which allows a gradation effect of the mix of two filaments. The generation algorithm to make gradient G-code has been implemented in Cura using C ++ and Python.