• Korean Journal of Food Science and Technology
• /
• v.41 no.2
• /
• pp.167-172
• /
• 2009

The principal objective of this study was to determine the optimum manufacturing conditions of egg white with high foaming property for the production of angel food cakes. The egg whites were desugarized and powdered at predetermined pHs and drying temperatures. The physicochemical properties of the produced cakes were measured and sensory evaluations were conducted on a 9-point scale. The volume and textural properties of cakes produced from spray-dried egg whites did not differ from those of the cakes prepared from the control egg whites. The pH of batter and the specific gravity of foam and batter with egg white powder at pH 6.74/66.5$^{\circ}C$ did not differ from those of the control, whereas the one prepared with commercial powder lost the characteristics of cake to a significant degree. The overall acceptance scores of egg white powder of pH 6.74/66.5$^{\circ}C$ and commercial powder were 6.25 and 2.33 as compared to the control (6.42). These results indicate that the egg white powder that was desugarized, pH-adjusted to 6.74, and dried at 66.5$^{\circ}C$ might be utilized to prepare angel food cakes with the desirable physicochemical and sensory attributes.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.184-197
• /
• 2008

This study was to investigate the influence of combining composite resins with different elastic modulus, and occlusal loading condition on the stress distribution of restored notch-shaped non-carious cervical lesion using 3D finite element (FE) analysis. The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. A notch-shaped cavity was modeled and filled with hybrid, flowable resin or a combination of both. After restoration, a static load of 500N was applied in a point-load condition at buccal cusp and palatal cusp. The stress data were analyzed using analysis of principal stress. Results showed that combining method such that apex was restored by material with high elastic modulus and the occlusal and cervical cavosurface margin by small amount of material with low elastic modulus was the most profitable method in the view of tensile stress that was considered as the dominant factor jeopardizing the restoration durability and promoting the lesion progression.

• Journal of the Korean Chemical Society
• /
• v.38 no.9
• /
• pp.640-652
• /
• 1994

This work is undertaken to determine alcohol homologues so-called fusel oil that may be present in the Korean folk sojues (distilled liquor) made from grains and to describe sample preparation and analytical method by GC-FID-MS. Solid phase extraction method for sample preparation by using porous styrene divinyl benzene polymer (Porapak Q) was compared with steam distillation and solvent extraction method. Retention behaviors of homologous series of alcohols were also studied. Log values of retention time, molecular weight, boiling point, and capacity factor of alcohols showed linear correlations to the carbon number of an alcohol, to the oven temperature, and to the dielectric constant. Components such as methyl alcohol, n-propyl alcohol, isobutyl alcohol, isopentyl alcohol, and phenethyl alcohol have been identified. The more amount of isopentyl alcohol than other alcohols are contained in the Korean folk sojues, while that of n-propyl alcohol are contained in Chinese kaoliangchiew. Degree of similarity or dissimilarity and classification of the individual samples were discussed using multivariate statistical analysis(principal components analysis) based on GC data.

• Food Science and Preservation
• /
• v.11 no.4
• /
• pp.441-447
• /
• 2004

To elucidate changes in qualifies of pork and beef during storage and identify decay point, beef (loin, tenderloin, plate) and pork (belly, loin, thigh) were stored at $4^{\circ}C$, and their pH, volatile basic nitrogen (VBN), thiobarbituric acid reacted substance (TBARS), electronic nose analysis, and sensory evaluation were performed. Belly of pork had higher values in pH, VBN and TBARS, compared to loin and thigh of pork. Electronic nose analysis clearly indicated a difference in principal component score between day 0 and day 12 of storage. Sensory evaluation showed that pork began to away at day 4 of storage and not edible after 6 days. Loin and tenderloin of beef had higher values in pH and VBN, compared to plate of beef. Regarding TBARS, all beef samples had the similar values at the beginning of storage, but loin of beef had a drastic increase after 8 days of storage, differently from tenderloin and plate of beef. Plate of beef had lower values in overall. Electronic nose analysis of beef showed the similar results with those of pork.

• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.359-370
• /
• 2006

The objective of this study was to investigate the effect of excessive occlusal loading on stress distribution on four type of cervical lesion, using a three dimensional finite element analysis (3D FEA). The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. Four different lesion configurations representative of the various types observed clinically for teeth were studied. A static point load of 500N was applied to the buccal and lingual cusp (Load A and B). The principal stresses in lesion apex, and vertical sectioned margin of cervical wall were analyzed. The results were as follows 1. The patterns of stress distribution were similar but the magnitude was different in four types of lesion 2. The peak stress was observed at mesial corner and also stresses concentrated at lesion apex. 3. The compressive stress under load A and the tensile stress under load B were dominant stress. 4. Under the load, lesion can be increased and harmful to tooth structure unless restored.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.184-197
• /
• 2008

This study was to investigate the influence of combining composite resins with different elastic modulus, and occlusal loading condition on the stress distribution of restored notch-shaped non-carious cervical lesion using 3D finite element (FE) analysis. The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. A notch-shaped cavity was modeled and filled with hybrid, flowable resin or a combination of both. After restoration, a static load of 500N was applied in a point-load condition at buccal cusp and palatal cusp. The stress data were analyzed using analysis of principal stress. Results showed that combining method such that apex was restored by material with high elastic modulus and the occlusal and cervical cavosurface margin by small amount of material with low elastic modulus was the most profitable method in the view of tensile stress that was considered as the dominant factor jeopardizing the restoration durability and promoting the lesion progression.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.204-217
• /
• 2005

Purpose. The purpose of this study was to analyze stress distribution of all ceramic posterior fixed partial denture using a three dimensional finite element method. Material and method. A three dimensional finite element model was created to demonstrate all-ceramic posterior fixed partial denture and then this computer model measured the stress distribution of the all ceramic bridges which has a ceramic core materials such as Zirconia, IPS Empress. 2. In-Ceram zirconia, Metal-Ceramic. Also the stress distribution was examined according to loading sites when force was applied to sites such as the central area of second premolar the mesial connector of pontic, the central fossa of pontic, the distal connector of pontic, and the central fossa of second molar. Results. 1. In all the materials of the core in this study, von Mises stress indicated that the stress increased as force was applied to loaded sites, just at those points, on the connector, and the margin in the area adjacent to the connectors. 2. The maximum principal stress was much higher in the lower part of the connectors than in any other region. 3. As the load was applied to the different locations, the research showed a consistent increase of stress in the lower connectors. The maximum value of the von Mises stress was two or three times greater when the load was applied directly to the connectors rather than indirectly through another stressed region. 4. In the case of In-Ceram zirconia, the stress in lower connectors was the highest of all the reference points, the stress showed 75% of all the maximum stress. Ziconia showed 72%, Metal Ceramic 67% and IPS Empress 2 50%. 5. In the case of Ziconia, the stress was well dispersed in each reference point that the stress differences were smaller when compared to In-Cream ziconia.

• Journal of the Korea Concrete Institute
• /
• v.29 no.1
• /
• pp.53-64
• /
• 2017

Ultra-high performance fiber-reinforced concrete (UHPFRC) is characterized by a post-cracking residual tensile strength with a large tensile strain as well as a high compressive strength. To determine a material tensile strength of UHPFRC, three-point loading test on notched prism and direct tensile test on doubly notched plate were compared and then the design tensile strength is decided. Shear tests on nine I-shaped beams with varied types of fiber volume ratio, shear span ratio and size effect were conducted to investigate shear behavior in web. From the test results, the stress redistribution ability represented as diagonal cracked zone was quantified by inclination of principal stress in web. The test results shows that the specimens were capable of resistance to shear loading without stirrup in a range of large deformation and the strength increase with post-cracking behavior is stable. However at the ultimate state all test specimens failed as a crack localization in the damaged zone and the shear strength of specimens is affected by shear span ratio and effective depth. Strength predictions show that the existing recommendations should be modified considering shear span ratio and effective depth as design parameters.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.1
• /
• pp.29-37
• /
• 2008

With the rapid development of display technology as well as the diversity of display, image quality assessment plays an important role in display color reproduction. The image quality has described by objective evaluation based on the physical measured data, such as contrast ratio, color reproduction range, color temperature, and gamma characteristics, etc., however, the final judgement is achieved by perceptual quality assessment of observers. Therefore, it is necessary to investigate the relationship between physical performance of display and perceptual image quality. Thus, in order to evaluate objectively the color reproduction characteristics of two mobile displays, TFT-LCD and AMOLED, we measured the darkroom contrast ratio of full screen, luminance and color temperature of full-screen white, full-screen gray and color linearity, tone reproduction of color scales for each RGB primary, and color reproduction range. Then the pair-wise comparison is implemented for image experts and naive observers not only to judge their preference on principal evaluation attributes but also to subjectively describe perceived image quality. Through two evaluation processes, we derived the objective bases that can prove the results of subjective image quality assessment by interconnecting physical factors that have influence on observers' preference judgements. Finally, this paper provided important information for improving the image quality and increasing preference from an observer's point of view.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.6
• /
• pp.27-37
• /
• 2008

Applications of 3D data increase with advancement of multimedia technique and contents, and it is necessary to manage and to retrieve for 3D data efficiently. In this paper, we propose a new method using the sliced shape which extracts efficiently a feature description for shape-based retrieval of 3D models. Since the feature descriptor of 3D model should be invariant to translation, rotation and scale for its model, normalization of models requires for 3D model retrieval system. This paper uses principal component analysis(PCA) method in order to normalize all the models. The proposed algorithm finds a direction of each axis by the PCA and creates orthogonal n planes in each axis. These planes are orthogonalized with each axis, and are used to extract sliced shape image. Sliced shape image is the 2D plane created by intersecting at between 3D model and these planes. The proposed feature descriptor is a distribution of Euclidean distances from center point of sliced shape image to its outline. A performed evaluation is used for average of the normalize modified retrieval rank(ANMRR) with a standard evaluation from MPEG-7. In our experimental results, we demonstrate that the proposed method is an efficient 3D model retrieval.