• 제목/요약/키워드: prime process

검색결과 244건 처리시간 0.025초

BFB에 의한 분뇨처리(糞尿處理)의 연구(研究) (A Study on the Nightsoil Treatment by BFB)

  • 김환기;이영동
    • 대한토목학회논문집
    • /
    • 제3권2호
    • /
    • pp.1-15
    • /
    • 1983
  • 본(本) 논문(論文)에서는 활성(活性)슬러지법(法)에 의(依)한 분뇨처리방법(糞尿處理方法) 대신 BFB를 이용(利用)한 저희석(低稀釋) 분뇨처리(糞尿處理)의 가능성(可能性)과 수학적(數學的) 해석(解析)을 시도(試圖)하였다. 실험(實驗)은 BFB의 메디아로써 폴리프로필렌계(系) 합성섬유(合成纖維)인 부직포(不織布)를 사용(使用)하였으며, 수온(水溫) $20^{\circ}C$에서 F/M비(比) 및 분뇨(糞尿)의 희석비(稀釋比)를 0.12~0.37/day와 2~10배(倍)로 변화(變化)시켜 연속식(連續式) 반응조(反應槽)에 의해 수행(修行)되었다. 여기서 얻어진 결과(結果)로는 저희석(低稀釋) 분뇨처리(糞尿處理)에 대(對)한 BFB의 적용(適用)은 다른 생물학적(生物學的) 처리법(處理法)에 비(比)해 더 좋은 효과(効果)를 얻을 수 있는 것으로 나타났는데 본연구(本硏究)에서 나타난 분뇨(糞尿)의 최적희석비(最適稀釋比)는 5배(倍)로 나타났고, 그 때의 최적(最適) 체류시간(滯留時間)은 17시간(時間)으로 나타났다. 따라서 반응조(反應槽)의 체적(體積)은 70%, 희석수(稀釋水)는 80%까지 절감(切減)할 수 있는 것으로 계산(計算)되었다. 또 완전혼합(完全混合) 활성(活性)슬러지법(法)에 적용(適用)되는 수학적(數學的) 해법(解法)으로도 BFB의 실험결과(實驗結果)를 해석(解析)할 수 있었다. $20^{\circ}C$에서 McKinney 식(式)($K_m$)과 Eckenfelder 식(式)($K_e$)을 이용(利用)하여 구(求)한 유기물(有機物) 제거속도(除去속도(速度))는 1.784/hr와 $2.0{\times}10^{-3}l/mg{\cdot}day$이었으며, 다른 방법(方法)에 비(比)해 유기물(有機物) 제거(除去)가 빠른 속도(速度)로 진행(進行)되었다. 미생물(微生物) 번식계수(繁殖係數)($a_5$), 내호흡(內呼吸) 계수(係數)(b), 미생물(微生物) 합성(合成)에 필요(必要)한 요소(酸素) 요구율(要求率)($a{_5}^{\prime}$) 및 내호흡(內呼吸)에 필요(必要)한 산소(酸素) 요구율(要求率)(b')은 각각(各各) 0.349, 0.0237/day, 0.495와 0.0336으로 계산(計算)되었다.

  • PDF

공동생성적 대화가 중학생의 과학적 모델에 관한 이해와 모델 구성에 미치는 영향 (The Effects of Cogenerative Dialogues on Scientific Model Understanding and Modeling of Middle School Students)

  • 김지윤;최승언;김찬종
    • 한국지구과학회지
    • /
    • 제37권4호
    • /
    • pp.243-268
    • /
    • 2016
  • 본 연구의 목적은 공동생성적 대화가 인식론적 측면에서 학습자의 과학 모델에 관한 이해와, 실행 과정의 측면에서 모델 구성에 미치는 영향을 살펴보는 것이다. 서울 소재 여자중학교 1학년 49명의 학생들에게 총 5차시 모델 구성 수업을 실시한 후 공동생성적 대화에 참여한 2개 조(8명)의 학생들과 참여하지 않은 2개 조(9명)의 학생들의 모델에 관한 이해와 모델 구성을 비교하였다. 모델에 관한 이해는 Upmeier zu Belzen and $Kr{\ddot{u}ger$ (2010)의 분석틀을 사용하였고, 모델 구성 과정은 Baek et al. (2011)의 분석틀을 수정 및 보완하여 분석하였다. 그 결과 전반적으로 공동생성적 대화에 참여한 학생들은 그렇지 않은 학생보다 과학적 모델에 관한 이해와 모델 구성 수준이 높게 나타났다. 공동생성적 대화에 참여한 조의 학생들은 모델을 새로운 현상을 설명할 수 있는 가설로 인식하였지만, 참여하지 않은 조의 학생들은 모델을 현상을 이해하는 수단으로 인식하였다. 본 연구는 학생들의 모델 구성 과정을 측정하는 분석틀을 마련하여 학교 현장에 유용하게 사용할 수 있게 하였다. 또한 새로운 학습 방법으로써 공동생성적 대화를 모델 구성 수업에 적용했다는 점에서 의의가 있다.

Inconel 740H 니켈기 초내열합금과 TP316H 스테인리스강의 이종금속 SMA 용접부의 미세조직과 크리프 파단 특성 (Microstructure and Creep Fracture Characteristics of Dissimilar SMA Welds between Inconel 740H Ni-Based Superalloy and TP316H Austenitic Stainless Steel)

  • 신경용;이지원;한정민;이경운;공병욱;홍현욱
    • Journal of Welding and Joining
    • /
    • 제34권5호
    • /
    • pp.33-40
    • /
    • 2016
  • The microstructures and the creep rupture properties of dissimilar welds between the Ni-based superalloy Inconel 740H and the non-stabilized austenitic stainless steel TP316H have been characterized. The welds were produced by shielded metal arc (SMA) welding process with the AWS A5.11 Class ENiCrFe-3 filler metal, commonly known as Inconel 182 superalloy. Postweld heat treatment at $760^{\circ}C$ for 4 hours was conducted to form ${\gamma}^{\prime}$ strengthener in Inconel 740H. The austenitic weld metal produced by Inconel 182 had a dendritic microstructure, and grew epitaxially from the both sides of Inconel 740H and TP316H base metals. Since both Inconel 740H and TP316H did not undergo any solid-state transformation during welding process, there were no heat-affected-zone (HAZ) sub-regions and the coarsoned grains near the weld interface were limited to a narrow region. The hardness of Inconel 182 weld metal was ~220 Hv. The gradual hardness decrease was detected at HAZ of TP316H, and the TP316H base metal displayed the lowest hardness value (~180 Hv) whilst the Inconel 740H showed the highest hardness value (~400 Hv). Fracture after creep occurred at the center of weld metal, regardless of creep condition. It was found that during creep the cracks initiated and propagated along interdendritic regions and grain boundaries at which Laves particles enriched in Nb, Si and Cr were present. The appropriate design of weld metal was discussed to suppress the creep-induced cracking of the present dissimilar weld.

온라인 시민저널리즘 양상과 시민 영향력에 관한 한.미 간 비교 연구 - '유가' 관련 보도를 중심으로 (A Comparative Study on Online Civic Journalism Practice and Civic Influence in the U.S. and Korea - Focus on News about the 'Oil Price')

  • 양민제;김민하
    • 한국언론정보학보
    • /
    • 제45권
    • /
    • pp.463-495
    • /
    • 2009
  • 미국 사회에서 1980년대에 시작된 시민저널리즘(civic journalism)이 한국에서는 2000년대에 들어와서야 그 자리를 잡고 활성화되기 시작했다. 기성 저널리즘의 구조적인 문제점들을 보완하기 위해 태동한 대안 저널리즘으로서의 시민저널리즘은 증가하는 온라인 시민기자와 온라인 뉴스 미디어 확산에 의해 새로운 국면을 맞이하고 있는 실정이다. 이에 따라, 두 나라의 시민저널리즘 양상과 그 실천에 있어서의 시민 영향력이 몇몇의 요인에 따라 유의미하게 차이를 드러낸다는 사실에 주목하며 본 연구에서는 그 요인들을 찾아내고 두 나라의 온라인 시민저널리즘을 실증적으로 비교 분석하고자 한다. 이러한 목적 하에 미국의 CNN "iReport", 한국의 "오마이뉴스"라는 양국의 대표적 온라인 시민저널리즘을 다음과 같은 4가지 측면에서 분석하였다: 탈객관주의 정도, 사회 문제에 대한 해결책 모색, 기사의 생산과 소비에 미치는 시민의 영향력 정도. 그 결과로, 미국의 시민저널리즘에서는 전통적인 저널리즘의 객관주의로부터 벗어난 경우가 많고, 사회 문제에 대한 대안 및 해결책 모색과 시민 기자의 활용 정도에 있어서 한국의 시민저널리즘보다 앞서 있다는 점을 알 수 있었다. 또한 기사 의제 설정에 있어서의 시민 의견 반영 정도나 생산된 기사에 대한 시민 참여 및 영향력에 있어서도 한국의 시민저널리즘보다 발전된 모습을 보이고 있었다. 그에 반해, 한국의 시민저널리즘은 기사 의제 설정에 있어서의 여론 조사 반영에 있어서만 미국의 저널리즘보다 앞서 있었고, 정부와 관련된 특정 이슈에 대한 기사에 대해서만 시민의 영향력 이 미치는 특징을 나타냈다.

  • PDF

경제발전전략으로서 한국의 경제자유구역과 운영체계에 관한 연구 (Korea's Free Economic Zone as an Economic Development Strategy and Operational System)

  • 고의현
    • 유통과학연구
    • /
    • 제12권9호
    • /
    • pp.113-123
    • /
    • 2014
  • Purpose - After Korea's Free Economic Zone (FEZ) system was launched in 2003, there have been many debates about upgrading it and its support systems. However, as of 2013, there were insufficient results. Further, upon the designation of the East Coast and Chungbuk as official FEZs from February 4, 2013 by the 56th the Commission, there is a concern that many people are in the area designated as FEZ 8. This study investigates Korea's new FEZ system as part of Korea's primary new economic development policy in the 21st century. Therefore, this study examines views on the weaknesses of the past ten years of FEZs so that Korea can expand its FEZ system. Research design, data, and methodology -Many countries have considered the FEZ as an economic special zone. By reviewing previous research models, this study provides an update using recent data and materials, until 2013, from the Center of Free Economic Zones. In previous studies, the lack of support systems was attributed to proposals to ensure operational autonomy and differentiation of each FEZ; however, the main cause cannot be solved through regulatory issues, as difficulties caused by the operational system are responsible for the problems. We wish to analyze the FEZ, specifically the operational system; this is the main issue of this study. Results - After the first FEZs were established, it became necessary to have basic plans, as investment results in 2013 compared to the same period this year led to lower earnings in the first half of 2014. We propose an improvement of the operational system because in the free economic zones, the operational system is the root cause of the underlying problem. The results of this research are as follows. The weak management of the FEZ system is influenced by weak investment, delayed development, foreigners' living facilities, benefits of foreign investments, the control tower's policy making decision process, quickness of the process of satisfying legal requirements, and support For the independence of FEZs. Conclusion - Local governments do not have legal rights over FEZ deregulation and investment industries. This study suggests that the local government should have more independence from the central government. Moreover, independent management committees are more effective for ensuring public rights, better employee responsibilities, and better-qualified personnel. The FEZ committee struggles to effectively manage the locations of FEZs, foreign investments, and related facilities under the control of the Ministry of Trade, Industry and Energy. Thus, the FEZ committee should be under either the Prime Minister's office or the Presidential committee, to control and effectively coordinate between the local and central governments. If the problem clearly applies to the operational system in 2013, it is necessary to provide materials and methods so that the results of the first half of 2014 can be computed despite the data limits and lack of resources, and the data can be analyzed in a more diachronic thesis.

대도시 교외지역 제조업 입지와 종사자의 거주지 - 양산시 사례 - (A study on the location of manufacturing industry and the Works' Residence in Metropolitan suburbs : A case of Yangsan)

  • 이다혜;주경식
    • 한국지역지리학회지
    • /
    • 제19권4호
    • /
    • pp.641-653
    • /
    • 2013
  • 연구는 대도시 공업 교외화의 영향을 받은 양산시를 사례로 제조업의 입지와 종사자의 거주지를 분석하였다. 연구는 통계 자료와 양산시 제조업체들을 대상으로 한 설문조사, 현지답사, 심층면담 등을 통해 이루어졌다. 분석의 결과는 다음과 같다. 첫째, 양산시로 이전한 제조업체는 1980년대에 부산에서 이전한 비중이 매우 높았다. 이전요인과 입지요인을 조사한 결과 부지요인이 가장 높았으며, 신생업체는 이전업체에 비해 하청 협력업체와의 연계요인 비중이 컸다. 둘째, 양산시 제조업에 부산시 공업 교외화의 영향력이 나타나 업종면에서 고무 플라스틱 업종이, 규모면에서는 대기업의 비중이 높았다. 셋째, 양산시 제조업체 입지는 경부고속도로 인접지역에서 국가산업단지와 공업지구를 중심으로 분포지역이 확대되었으며, 최근 공단 외 지역으로도 확산되는 양상이 나타났다. 넷째, 양산시 제조업 종사자의 거주지는 부산 비중이 44.5%를 차지하여, 부산의 기업 이전 영향이 노동시장에도 반영되었음을 보여주었다.

  • PDF

DMZ 세계평화공원 조성을 위한 국제공조 방안: NGO의 국제연대 활동과 지원을 중심으로 (International Cooperation Plan for DMZ World Peace Park: Focusing on NGO's international solidarity and support)

  • 서경도
    • 디지털융복합연구
    • /
    • 제14권12호
    • /
    • pp.645-655
    • /
    • 2016
  • 본 연구의 목적은 'DMZ 세계평화공원' 조성에서 NGO국제연대의 역할과 기능, 그리고 작동의 메커니즘, NGO국제연대의 정책형성 등에 대하여 분석하고자 한다. DMZ 세계평화공원 조성은 북한과 대한민국 정부의 합의를 기초로 하여 양 주체간의 대화노력의 결과로 얻어질 수 있는 문제지만 그러한 결과를 실현하기 위한 과정상의 문제에 있어서 보다 더 완화된 접근 방법을 강구하여야 하며, 장기적으로 단계적인 계획 하에 이루어져야 한다. 이를 실현하는 과정에서 남한 정부의 독자적인 노력만으로는 어려우며, 국제사회와 더불어 북한이 대화협상의 의지를 가지도록 다양한 대화채널을 모색하여야 하며, 이는 곧 북한의 접근 경로 상 제3의 영역인 NGO의 역할에 주목하여야 한다. 결과적으로 'DMZ 세계평화공원' 조성하기 위해서는 DMZ 세계평화공원의 구체적인 실천 로드맵의 설정이 필요한데, 1단계로는 대통령 또는 국무총리 직속의 'DMZ 세계평화공원 추진위원회'의 구성을 하고 운영하는 것, 후보지의 선정, 북한의 호응과 국제사회의 지지에 대한 호소, 민간의 자발적 참여가 필요하다. 2단계는 소재지의 최종확정이 필요하며, 3단계로는 평화공원의 조속한 착공, DMZ평화적 이용의 확대, DMZ 접경지역의 생태 역사 문화관광의 확대 등의 단계별 로드맵이 마련될 필요가 있다.

물류자동화 시스템의 효율적 구축을 위한 컨설팅 방법론 제안 : K기업의 사례를 중심으로 (A Proposal on the Consulting Model for Efficient Construction of Material Handling Automation System : Focused on K Company's Case)

  • 고재호;조진형;오현승;심성철;유지현;이세재
    • 산업경영시스템학회지
    • /
    • 제38권4호
    • /
    • pp.202-211
    • /
    • 2015
  • Companies build the factory automation system to improve management effectiveness and productivity as prime strategies for sustainable growth. But most companies undergo various trials and errors while carrying out the project without elaborate preparation stage for factory automation. In this study, we tried to verify what factors are critical to effectively building distribution automation system, which is a branch of factory automation system. A consulting model for setting up a Material Handling Automation System by utilizing the Stage-Gate Process, which is product development process was studied. 29 material handling automation projects carried out between the year 1990 to 2013 at K-Company were selected. Interviews with the project managers, operators and maintenance personnels, various records and current status of the projects were used as data for structural equations based on the Milan consulting model and existing researches of factory automation, CIM for material handling automation. Creating effective basis of production, material handling system and energy saving system with expert review, when preparing a material handling automation project, help promote the project planning thus contributing to the performance of the resulting system, which appears though rather weakly in our data. Also the effect of material handling automation can be enhanced through sufficient and effective links to the relevant environments such as production logistics management and automated warehouses. More detailed planning characteristics of project promotion or some time-series data of effective Material Handling Automation System could enhace furthur studies. We propose a consulting model for setting up an efficient material handling automation system.

XN-9000장비에서 Low Level QC물질에서의 혈소판 수 관리와 용혈에 따른 P-LCR의 변화 (Maintenance of Platelet Counts with Low Level QC Materials and the Change in P-LCR according to Hemolysis with XN-9000)

  • 심문정;이현아
    • 대한임상검사과학회지
    • /
    • 제50권4호
    • /
    • pp.399-405
    • /
    • 2018
  • 임상검사실에서의 혈소판 수 계산은 지혈이상의 진단과 치료에 필수적이며, 혈소판 수가 적은 경우 혈소판 수혈이 필요하고 항암치료 후 혈소판 수 경과를 모니터링하는데 매우 중요하다. 정도관리는 환자결과를 내보내기 전에 검사실에서 오류를 줄이고 교정하는 과정이며 분절된 적혈구는 혈소판과 크기가 비슷하여 혈소판 수 계산에 영향을 미친다. 검사실에서 내부정도관리low QC물질이 2SD를 벗어난 것을 경험하였고, 지금까지 용혈과 혈소판 지표들과의 관계에 대해 밝혀진 것이 충분하지 않아 연구를 시작하였다. 이에 본 연구에서는 XN CHECK low level QC물질을 이용해 PLT-I, PLT-O, PLT-F 방법간의 혈소판 수치를 비교하였으며, 용혈검체를 만들어 5가지 혈소판지표들에 대해 비교분석 하였다. 그 결과PLT-F방법에서 CV값이 가장 적게 나타났으며, 용혈검체에서 P-LCR 수치가 18.4%에서 31.9%로 증가함을 보였다. 이 연구를 통해 혈소판 수치가 낮은 경우는 PLT-F방법으로 하는 것이 더 정확하며, 검체가 용혈이나 변질이 의심되는 경우 이를 평가할 때 P-LCR을 새로운 지표로 제시하고 있으며, 사람 혈액검체를 이용한 추후 연구가 더 필요할 것이라고 사료된다.

정책연구정보 공유를 위한 표준 API 공유 데이터 요소 도출에 관한 연구 (A Study on Deducation of Standard API Sharing Data Elements for Policy Study Information Sharing)

  • 박양하
    • 한국비블리아학회지
    • /
    • 제32권1호
    • /
    • pp.391-413
    • /
    • 2021
  • 국가 운영 정책을 기획하고, 실행하고, 평가하기 위한 모든 영역의 의사결정 단계에서 정책연구정보는 매우 중요한 정보원이라 할 수 있다. 국책연구기관의 정책연구 과제는 연구 설계부터 활용 효과에 대한 성과 평가까지 그 효율성과 효과성을 보장하기 위해 연구 전 과정에 있어서 꼼꼼한 단계를 거쳐 관리되고 있다. 그러나 실제 정책연구정보를 필요로 하는 수요자나 일반 국민에게 직접적으로 노출되는 정보는 연구과제의 최종 성과물인 정책연구보고서 형태로 발간된 자료이다. 국무총리산하 경제·인문사회연구회에서 구축·운영하고 있는 국가정책연구포털(NKIS)은 27개의 국책연구기관의 정책성과물과 함께 기관 간 협동 연구를 수행하여 산출된 연구보고서를 통합 관리하는 대국민 정보제공서비스이다. 본 연구는 국가정책연구포털(NKIS)의 운영 현황과 정보 관리 현황을 소개하면서 국책연구기관의 정책연구정보자료의 관리 특성을 파악하고, 외부 서비스와의 API(응용 프로그램 인터페이스)를 위해 고려해야 하는 특이사항을 도출하여, 표준화된 형태의 공유 데이터 요소를 도출하는 것을 목적으로 한다.