• 한국인터넷방송통신학회논문지
• /
• 제17권6호
• /
• pp.19-25
• /
• 2017

본 논문은 비트코인 채굴에 필요한 SHA-256 암호 해시 값(n)을 구성하는 2개의 소수(p,q)를 빠르게 해독하는 소인수분해법을 다룬다. 본 논문에서는 Pollard's Rho 소인수분해 알고리즘의 수행횟수를 월등히 감소시킨 알고리즘을 제안하였다. Rho (${\rho}$) 알고리즘은 $(x_0,y_0)=(2,2)$ 초기치에 대해 $x_i=x^2_{i-1}+1(mod\;n)$과 $y_i=[(y^2_{i-1}+1)^2+1](mod\;n)$을 계산하여 1 < $gcd({\mid}x_i-y_i{\mid},n)$ < n으로 소인수를 구한다. 이 알고리즘은 특정 합성수에 대해서는 소인수 분해에 실패할 수 있다. 제안된 알고리즘은 Pollard Rho 알고리즘에 $(x_0,y_0)=(2^k,2^k)$와 ($2^k,2$), $2{\leq}k{\leq}10$을 적용하였다. 그 결과 모든 합성수에 대해 소인수분해를 할 수 있었으며, Pollard Rho 알고리즘의 수행횟수를 67.94% 감소시켰다.

• 한국전산구조공학회논문집
• /
• 제17권3호
• /
• pp.271-278
• /
• 2004

본 논문에서는 토목 구조물에 대한 바람의 영향을 알아보기 위하여 수치 기법으로 해석하였다. 지간이 긴 현수교는 바람에 의한 공력탄성학적 분안정성에 놓일 수 있으므로, 설계 시 공기력은 주요한 고려사항이며 공탄성 안정성은 반드시 확인되어야 한다. 풍속이 임계 플러터 속도를 넘어서면, 교량 구조물은 바람과 상호작용에 의한 플러터 현상으로 인해 붕괴된다. 교량 단면의 공탄성 해석을 위해 전산유체역학과 전산구조해석을 이용하였으며, Navier-Stokes방정식을 사용하여 공기력을 구하였다. 본 연구에서는 구조 강성에 따른 교량 구조물의 임계 플러터 속도가 연구된다. 교량 단면의 임계 플러터 속도는 구조강성의 변화에 민감함을 확인할 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 제5회 압출 및 인발가공 심포지엄
• /
• pp.43-49
• /
• 2002

A7003 alloy has characteristics of their excellent weldability, high corrosion resistance and superior plastic working however the broadening of application for the alloy has been hampered by the lower extrudability associated by Mg content. For improvement of extrudability and enhanced recovery efficiency during Al scrap recyeling, it has been generally practiced to reduce Mg content in A7003 alloy. Therefore, it is necessary to investigate the influence of Mg content on mechanical strength and extrudability of A7003 alloy. For efficient material processing which has small amounts, life cycle assessment in material processing(MLCA) is evaluated. The quantitative analysis of energy requirements and $CO_2$ emission for production of A7003 extruded bar are estimated with different Mg content and billet pre-heating process (heating source by light oil or LPG). In particular, the estimation of energy requirements was performed within shipping and gating range (except the mining and extraction stages)to investigate the influence of the variables on energy requirements and $CO_2$ emission in detail. As Mg content increased, the flow stress and the extrusion pressure for A7003 alloy increased. It has been thought that an increment in extrusion pressure with increasing Mg content is caused by the solid solution hardening of Mg atoms in the matrix and increment in volume fraction of intermetallic compound, $Mg_2Si$. The extrudability and the tensile strength are equal to, or above that of conventional A 7003 alloy even the content of Mg varied from $1.1wt.\%\;to\;0.5wt.\%$ alloy. This means that minimizing the content of Mg in A7003 alloy can enhance recovery efficiency during Al scrap recycling. It can be quoted that rather than Mg content energy source for billet heating is a prime factor to determine the atmospheric $CO_2$ emission.

• 한국생활과학회지
• /
• 제17권6호
• /
• pp.1205-1213
• /
• 2008

Material is a factor for maximizing formative aspect among fashion design factors. Therefore, central axis of modern fashion is performing various trials for escaping from existing cloth and searching for artistic value. Especially, Korean paper is a formative material, which is manufactured through traditional manual work in Korea. The material is used in various fields on the basis of its aesthetic feature. Especially, fashion field performs handcraft activity on the basis of mulberry pulp, which is a prime material of Korean paper. Because the activity can be reinterpreted by world designers, who want to find motive of fashion material in the third world, it is necessary to perform experimental study for developing expressive form on the basis of diversity of Korean paper material. Therefore, the purpose of this study is to perform experimental study by focusing on the development of Korean paper material in order to express formative feature. The study purposes are as follows. The first purpose is to reinterprete the theory through actual work of fiber formation using Korean paper in the current flow where art and design field are fused and compromised. The second purpose is to suggest vision of material development on the basis of formative feature to fashion world focusing its eyesight to Asia and the third countries. The study results are as follows. First, Korean paper has been evaluated as proper material for the fusion of design and art because of its handicraft feature, long-term preservation, heat insulation, absorption, diversity and eastern feature. Second, the study performed various trials for artistic dress material by developing 12 Korean paper works and suggested the development of new material on the basis of formative feature of modem fashion industry.

• Restorative Dentistry and Endodontics
• /
• 제29권4호
• /
• pp.353-364
• /
• 2004

The purpose of this study was to compare and to evaluate the combination use of 5 kinds of dentin adhesive systems and 5 kinds of composite resins using micro-shear bond test. Five adhesive systems (Prime & Bond NT (PBN). Onecoat bond (OC), Excite (EX), Syntac (SY), Clearfil SE bond (CS)) and five composite resins (Spectrum (SP), Synergy Compact (SC), Tetric Ceram (TC), Clearfil AP-X (CA), Z100 (Z1)) were used for this study ($5{\;}{\times}{\;}5{\;}={\;}25group$, n =14/group). The slices of horizontally sectioned human tooth were bonded with each bonding system and each composite resin, and tested by a micro-shear bond strength test. These results were analyzed statistically. The mean micro-shear bond strength of dentin adhesive systems were in order of CS (22.642 MPa), SY (18.368 MPa), EX (14.599 MPa). OC (13.702 MPa). PBN (12.762 MPa). The mean bond strength of self-etching primer system group (CS, SY) in dentin was higher than that of self-priming adhesive system groups (PBN, EX, OC) significantly (P<0.05). The mean bond strength of composite resins was in order of SP (19.008 MPa), CA (17.532 MPa). SC (15.787 MPa), TC (15.068 MPa). Z1 (14.678 MPa). Micro-shear bond strength of SP was stronger than those of other composite resins significantly (P < 0.05). And those of TC and Z1 were weaker than other composite resins significantly (P < 0.05). No difference was found in micro-shear bond strength of composite resin in self-etching primer adhesive system groups (CS, SY) statistically. However, there was significant difference of micro-shear bond strength of composite resin groups in self-priming adhesive systems group (PBN, EX, OC). The combination of composite resin and dentin adhesive system recommended by manufacturer did not represent positive correlation. It didn't seem to be a significant factor.

• Composites Research
• /
• 제17권3호
• /
• pp.1-7
• /
• 2004

최근 대형 복합재료 구조물 성형에 적합한 공정으로 주목받는 vacuum assisted RTM (VARTM) 공정에 있어, 보강섬유의 조직 내부에 잔류하는 공기를 제거하여 기공함유율을 낮추는 기술의 중요성이 인식되고 있다. 거대기공 혹은 불완전 함침영역은 부적절한 주입구 및 공기배출구의 위치, 혹은 금형의 형상에 의해 발생한다. 미세기공은 불균일한 수지 유동선단의 속도로 인해 유동선단 부분에서 집중적으로 형성되며, 금형충전 공정 도중 수지와 함께 이동한다. 성형이 완료된 제품내의 잔류 기공들은 완성품의 물리적 성질을 저하 및 제품의 파손을 초래할 수 있다. 본 연구에서는 VARTM 공정에서의 기공의 형성 및 이동을 해석할 수 있는 통합된 거시적/미시적 해석 방법을 개발하였다. 수치해석 프로그램을 개발하여 VARTM 공정에서의 3차원 수지 유동을 해석하였으며, 그에 따른 거대기공 및 미세기공의 분포를 예측하였다.

• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.140-147
• /
• 2011

The injection nozzle of an electro-hydraulic injector for the common rail Diesel fuel injection system is being opened and closed by movement of a injector's needle which is balanced by pressure at the nozzle seat and at the needle control chamber, at the opposite end of the needle. In this study, the slenoid actuator was considered as a prime movers in high pressure Diesel injector. Namely a solenoid-driven Diesel injector with different driving current types, as a general method driven by solenoid coil energy, has been applied with a purpose to develop the analysis model of the solenoid actuator to predict the dynamics characteristics of the hydraulic component (injector) by using the AMESim code. Aimed at simulating the hydraulic behavior of the solenoid-driven injector, the circuit model has been developed as a unified approach to mechanical modeling in this study. As this analytic results, we know the suction force and first order time lag for driving force can be endowed in solenoid-driven injector in controlling the injection rate. Also it can predict that the input current wave exerted on solenoid coil is the dominant factor which affects on the initial needle behavior of solenoid-driven injector than the hydraulic force generated by the constant injection pressure.

• 한국조리학회지
• /
• 제23권4호
• /
• pp.93-104
• /
• 2017

This study aimed to investigate the preferences for the particular menu depend upon a purpose of the events and a time slot. The study set the 16 imaginary profile of 5 selective attributes by using Conjoint Analysis for the customers who ate out at the grilled beef restaurant. The result showed that most significant factors of preference were a sirloin, Korean beef, a traditional interior design, a rice menu and the amount of marbling, in that order. In addition, the study revealed a high level of relative importance depend on the parts of meat cuts and the most preferred factor of the general customers was a sirloin in selective attributes. Next, the country of origin was important. All events showed the highest preference in the parts of meat cuts like the whole consumer group and there was a high partial value in sirloin for the purpose of the events. However, the prime ribs showed a higher level of relative importance when the customers had light meals or they participated in conferences. At the preference analysis of the important attributes and the level of partial value, the most significant factors were a sirloin, a country of origin, a traditional interior design, a rice menu, and the amount of marbling, in that order both in lunch and dinner. In addition, the study found that the parts of meat, the atmosphere in the restaurant, the quality of beef, dessert, and the country of origin were significant in order at relative importance.

• Journal of Ginseng Research
• /
• 제41권4호
• /
• pp.513-523
• /
• 2017

Background: Korean Red Ginseng extracts (RGE) have been suggested as effective immune modulators, and we reported that ginsenosides possess anti-inflammasome properties. However, the properties of nonsaponin components of RGE have not been well studied. Methods: To assess the roles of nonsaponin fractions (NS) in NLRP3 inflammasome activation, we treated murine macrophages with or without first or second inflammasome activation signals with RGE, NS, or saponin fractions (SF). The first signal was nuclear factor kappa-light-chain-enhancer of activated B cells (NF-${\kappa}B$)-mediated transcription of pro-interleukin (IL)-$1{\beta}$ and NLRP3 while the second signal triggered assembly of inflammasome components, leading to IL-$1{\beta}$ maturation. In addition, we examined the role of NS in IL-6 production and IL-$1{\beta}$ maturation in mice. Results: NS induced IL-$1{\beta}$ and NLRP3 transcription via toll-like receptor 4 signaling, whereas SF blocked expression. During the second signal, SF attenuated NLRP3 inflammasome activation while NS did not. Further, NS-injected mice presented increased IL-$1{\beta}$ maturation and IL-6 production. Conclusion: SF and NS of RGE play differential roles in the NLRP3 inflammasome activation. Hence, RGE can be suggested as an NLRP3 inflammasome modulator.

• 한국시뮬레이션학회논문지
• /
• 제26권2호
• /
• pp.31-39
• /
• 2017

본 연구는 무기체계의 단위비용을 고려한 K2(KC와 KAMD) 체계의 효과분석을 수행하였다. 단일 KC와 다중(고층 및 저층) KAMD를 가정하고, 각 체계에 임의의 무기체계를 설정하여 각각의 조합에 따라 총 12개의 시나리오를 작성하였다. 효과도는 전체 탄도미사일 위협 수량 대비 감소된 탄도미사일 위협의 비율로 정의하였으며, 비용은 발사된 무장의 수량과 단위비용으로 계산하였다. K2 체계의 효과도와 총비용은 몬테카를로 시뮬레이션을 1,000번 반복하여 추정하였다. 각각의 시나리오를 대안으로 하여 비용대 효과분석을 실시하였고, 효과고정법을 사용하여 최적 대안을 선정하였다. 연구 결과 KC 능력이 K2 체계의 방어 효과와 총비용을 결정하는 가장 중요한 요소였으며, 적정 수준의 저층방어체계를 갖춰야 요구되는 방어 효과를 달성할 수 있음을 확인하였다. 향후 연구에서 실질적인 무기체계 제원과 수명주기비용을 고려한 비용대 효과분석이 이루진다면 더욱 현실적인 분석이 가능할 것이다.