• 한국소음진동공학회논문집
• /
• 제18권12호
• /
• pp.1293-1300
• /
• 2008

This paper presents an active vibration control of cantilever beams under disturbances by a primary force. A direct velocity feedback control using a pair of PZT actuator and a velocity sensor is considered. Variation of the stability and performance with the locations of the sensor/actuator pair is investigated. It is found that the maximum gain varies with the locations of the sensor/actuator pair significantly. The maximum gain shows a symmetric distribution along the beam length with respect to the center point, although the boundary condition of the beam is unsymmetric. The control performance is affected by the location of the primary force as well as the location of the sensor/actuator pair. The active control system can more effectively reduce the vibration when the primary force is located close to the fixed boundary.

• 한국축산시설환경학회지
• /
• 제5권1호
• /
• pp.45-52
• /
• 1999

The purpose of this study is to provide information for the livestock for the livestock carcass composting operation in agricultural waste management. Burial, landfilling and incineration of livestock carcass may have environmental regulatory and economic liabilities. Dead animals amended with agricultural residues can be composted and used to promote soil fertility and reduce environmental pollution. In this study we evaluated the effect of amendments on the primary and secondary composting reaction and stability of compost. The full-scale composting bin of swine carcass in roofed system with three amendments was adequate in reaching sufficient temperature above 55$^{\circ}C$ long enough to kill the pathogen. The average temperature of the compost material in dead swine amended with corn stover increased rapidly to 64$^{\circ}C$ on the 2nd day after primary composting and dropped to near ambient temperature on the 140th day of composting. The composting with of corn stover and wheat straw are more efficient for swine carcass composting than that of sawdust. Therefore, the amendment property is an important factor in the design of composting facility.

• The Journal of Advanced Prosthodontics
• /
• 제6권6호
• /
• pp.547-554
• /
• 2014

Implant success is achieved by the synergistic combination of numerous biomechanical factors. This report examines the mechanical aspect of implants. In particular, it is focused on macrodesign such as thread shape, pitch, width and depth, and crestal module of implants. This study reviews the literature regarding the effect of implant thread geometry on primary stability and osseointegration under immediate loading. The search strategy included both in vitro and in vivo studies published in the MEDLINE database from January 2000 to June 2014. Various geometrical parameters are analyzed to evaluate their significance for optimal stress distribution, implant surface area, and bone remodeling responses during the process of osseointegration.

• 가족자원경영과 정책
• /
• 제12권4호
• /
• pp.63-77
• /
• 2008

This study was performed to develop the basic framework of multicultural art education programs for female foreign immigrants married to Korean males. First, these programs aim to lessen their cultural variance in acculturizing in Korea, and thereafter enhance their emotional stability and improve their creative ability to integrate cultural diversity into family life. The primary objective of this study was to offer a suitable education program and evaluation criteria for the program; the research has been done through person-to person interviews with 53 subjects using a series of questionnaires composed of 8 five-point Likert-Scaled items. As for the process of the interview, the subjects were asked about their satisfaction with each program item twice in order to comparetheir impressions before and after program participation. The satisfaction scores were analyzed using frequency distribution. In addition, the program effects were also evaluated by coordinators and developers from their subjective comments through periodical evaluation meetings. From the results, it is observed that art education programs are beneficial for improving female immigrants' emotionaland cultural integration. In addition, experts determined that the programs were helpful for improving their human relationship and acculturization in Korea. Finally, it is concluded that multicultural education programs are a primary fundamental infra-structural way of integrating diverse cultures and improving communication exchanges, and therefore, improve family stability among the multicultural families in Korea.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.466-471
• /
• 2004

In gas turbines, excess air for combustion is available and therefore lean premixed combustion is the most promising approach to the significant reduction of thermal NOx emissions. At lean conditions, however, flame stability is inherently worse and hence combustion tends to be incomplete. Efforts have been devoted toward extending the operating range of complete combustion at leaner conditions. One of them is the lean-lean two-stage combustion where lean to ultra-lean secondary mixtures are mixed with the hot burned gas from the primary stage. Conventional flame combustion or flameless reaction are initiated depending on the conditions of the secondary zone. In the first part of the present study, the effects of fuel injection on the emissions and flame stability were investigated for a single tubular flame, In the second part, the emissions and flame stability were studied for a two-stage combustor with secondary mixture injected through the tangential slots on a cylindrical combustor wall. The effects of the ratio of air flow rates to the primary and secondary zones on the emissions and combustion characteristics were investigate.

• Geomechanics and Engineering
• /
• 제2권2호
• /
• pp.71-88
• /
• 2010

Soil nailing technique is being widely used for stabilization of vertical cuts because of its economic, environment friendly and speedy construction. Global stability and lateral displacement are the two important stability criteria for the soil nail walls. The primary objective of the present study is to evaluate soil nail wall stability criteria under the influence of in-situ soil variability. Finite element based numerical experiments are performed in accordance with the methodology of $2^3$ factorial design of experiments. Based on the analysis of the observations from numerical experiments, two regression models are developed, and used for reliability analyses of global stability and lateral displacement of the soil nail wall. A 10 m high prototype soil nail wall is considered for better understanding and to highlight the practical implications of the present study. Based on the study, lateral displacements beyond 0.10% of vertical wall height and variability of in-situ soil parameters are found to be critical from the stability criteria considerations of the soil nail wall.

• Transactions on Electrical and Electronic Materials
• /
• 제16권6호
• /
• pp.293-302
• /
• 2015

Degraded data stability, weaker write ability, and increased leakage power consumption are the primary concerns in scaled static random-access memory (SRAM) circuits. Two new SRAM cells are proposed in this paper for achieving enhanced read data stability and lower leakage power consumption in memory circuits. The bitline access transistors are asymmetrically gate-underlapped in the proposed SRAM cells. The strengths of the asymmetric bitline access transistors are weakened during read operations and enhanced during write operations, as the direction of current flow is reversed. With the proposed hybrid asymmetric SRAM cells, the read data stability is enhanced by up to 71.6% and leakage power consumption is suppressed up to 15.5%, while displaying similar write voltage margin and maintaining identical silicon area as compared to the conventional memory cells in a 15 nm FinFET technology.

• 한국습지학회지
• /
• 제5권1호
• /
• pp.29-40
• /
• 2003

This study was performed to research the relation between airmass thunderstorm and stability index with 12 years meteorological data(1990~2001) at Busan. Also We used the analysed stability indices from University of Wyoming to consider airmass thunderstorm. The frequency of thunderstorm occurrence during 12 years was 156 days(annual mean 13days). The airmass thunderstorm frequency was 14 days, most of those occurrence were summertime(59%). And occurrence hour of airmass thunderstorm was distributed from 1300LST to 2100LST broadly. The highest forecast index for airmass thunderstorm at Busan was K index, the lowest forecast index was SWEAT index. The forecasting of thunderstorms is based primary on the concepts of conditional instability, convective instability, and forced lifting of air near the surface. Instability is a critical factor in severe weather development. Severe weather stability indices can be a useful tool when applied correctly to a given convective weather situation.

• 교육시설
• /
• 제3권3호
• /
• pp.75-82
• /
• 1996

• Safety and Health at Work
• /
• 제4권1호
• /
• pp.46-51
• /
• 2013

Objectives: Load carrying tasks are recognized as one of the primary occupational factors leading to slip and fall injuries. Nevertheless, the mechanisms associated with load carrying and walking stability remain illusive. The objective of the current study was to apply local dynamic stability measure in walking while carrying a load, and to investigate the possible adaptive gait stability changes. Methods: Current study involved 25 young adults in a biomechanics research laboratory. One tri-axial accelerometer was used to measure three-dimensional low back acceleration during continuous treadmill walking. Local dynamic stability was quantified by the maximum Lyapunov exponent (maxLE) from a nonlinear dynamics approach. Results: Long term maxLE was found to be significant higher under load condition than no-load condition in all three reference axes, indicating the declined local dynamic stability associated with load carrying. Conclusion: Current study confirmed the sensitivity of local dynamic stability measure in load carrying situation. It was concluded that load carrying tasks were associated with declined local dynamic stability, which may result in increased risk of fall accident. This finding has implications in preventing fall accidents associated with occupational load carrying.