• Journal of Korea Foundry Society
• /
• v.15 no.4
• /
• pp.368-376
• /
• 1995

An Al-composite material was fabricated with using the rheocompocasting process and the microstructure of the Al-Cu/SiCp composite material was investigated depending on the stirring times and the amount of Ti additions. The distribution of SiC dispersion shows the good result at the stirring time of 30 min. The degree of microdistribution of the $Al_2Cu$ and SiCp is improved when the amount of Ti addition is increased. At the compositon of 0.3%Ti, the primary solid is the compound of $Al_3Ti$ and no exist of the SiCp and $Al_2Cu$ phase around the primary $Al_3Ti$. In the process of compositization, SiCp is found at the primary and final solid parts and is found at the final solid part after remelting. $Al_2Cu$ and SiCp are distributed around and outside of dendrite or independently after remelting, which is different from the process of compositization.

• Carbon letters
• /
• v.25
• /
• pp.84-88
• /
• 2018

At present, an important research area is the search for materials that are compatible with CMOS technology and achieve a satisfactory response rate and modulation efficiency. A strong local field of graphene surface plasmon polariton (SPP) can increase the interaction between light and graphene, reduce device size, and facilitate the integration of materials with CMOS. In this study, we design a new modulator of SPP-based cycle branch graphene waveguide. The structure comprises a primary waveguide of graphene-$LiNbO_3$-graphene, and a secondary cycle branch waveguide is etched on the surface of $LiNbO_3$. Part of the incident light in the primary waveguide enters the secondary waveguide, thus leading to a phase difference with the primary waveguide as reflected at the end of the branch and interaction coupling to enhance output light intensity. Through feature analysis, we discover that the area of the secondary waveguide shows significant localized fields and SPPs. Moreover, the cycle branch graphene waveguide can realize gain compensation, reduce transmission loss, and increase transmission distance. Numerical simulations show that the minimum effective mode field area is about $0.0130{\lambda}^2$, the gain coefficient is about $700cm^{-1}$, and the quality factor can reach 150. The structure can realize the mode field limits of deep subwavelength and achieve a good comprehensive performance.

• Fisheries and Aquatic Sciences
• /
• v.18 no.1
• /
• pp.81-88
• /
• 2015

We investigated factors affecting primary cultures of Pacific abalone Haliotis discus hannai ovary-dissociated cells to identify general aspects of their early-phase culture. Ninety-seven cell populations derived from 30 individuals were cultured in different media with varying compositions of medium supplements, and initial attachment, subculture, and survival for ${\geq}10$ weeks were assessed according to medium composition and individual. We also examined the time required for subculture and the rate of cell death according to both culturing period and passage number within 10 weeks. A lack of fetal bovine serum (FBS) and hemolymph significantly inhibited the growth of cultured cells, while we detected no significant effect of medium composition on initial cell attachment. Through data reallocation, with the omission of data from cell populations cultured in FBS-free and hemolymph-free media, we showed that growth inhibition was also affected by individual differences among the abalones used. During the culture, we observed four different types of cell morphology. Moreover, considerable time was required for subculture-18.4 and 19.5 days for first and second subcultures, respectively-and cell death did not occur within 30 days or for passage 0. Our results will provide valuable information for developing universal cell culturing guidelines in abalone species and suggest the feasibility of culturing abalone ovary-dissociated cells.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.10
• /
• pp.817-824
• /
• 2015

Experiments were carried out to investigate the flow and mass transfer characteristics of an orifice nozzle. Measurements of primary and suction flow rates, dissolved oxygen concentration, and electric power were obtained. Vertically injected mixed-jet images were captured by a direct visualization technique with a high speed camera unit. The mass ratio, volumetric mass transfer coefficient, and mass transfer performance were calculated using the measured data. As the primary flow pressure increases, the mass ratio decreases slightly, while the volumetric mass transfer coefficient and electric power increase. As the primary flow pressure increases and the mass ratio decreases, the mass transfer rate increases because of the fine bubbles and wider distribution of the bubbles.

• Korean Journal of Metals and Materials
• /
• v.49 no.11
• /
• pp.874-881
• /
• 2011

The present study describes a new technique to extract the primary silicon from an Al-Si alloy melt using centrifugal force during its solidification. The primary silicon was separated from an Al-50 wt.%Si alloy by centrifugal force in the form of a foam, which facilitated subsequent acid leaching to extract the pure silicon due to its wide surface area. The foam recovery after centrifugal separation was decreased as centrifugal acceleration was increased. The final recovery after acid leaching became closer to the solid fraction of the alloy, which was calculated from the Al-Si binary phase diagram, with increasing centrifugal acceleration due to the effective removal of the attached Al on the foam. The purity of the primary silicon obtained by the centrifugal separation method was over 99.99%, with only aluminum being also present.

• Corrosion Science and Technology
• /
• v.20 no.6
• /
• pp.367-372
• /
• 2021

The effect of carbon addition on the general corrosion behavior of high-chromium cast iron (HCCI) was studied by a scanning electron microscope with energy dispersive spectroscopy (SEM-EDS) or electron back-scattered diffraction (EBSD), or electrochemical polarization techniques in 0.1 mol dm^-3 H₂SO₄ + 0.05 mol dm^-3 HCl at room temperature. The addition of 2.1-2.8 wt% carbon to HCCI increased the fraction of eutectic austenite and eutectic carbide phases, while that of HCCI decreased the fraction of the primary austenitic phase. Potentiostatic polarization of the HCCI at -0.35 V_SSCE or 0.0 V_SSCE resulted in preferential general corrosion of the primary austenitic or eutectic austenitic phases, respectively. The decrease in corrosion current density and the shift in noble corrosion potential direction with increasing carbon content in the HCCI indicated that the fraction and the chemical composition of austenitic (primary and eutectic) and carbide phases were strongly related to the general corrosion behavior of the HCCI.

• Journal of Power Electronics
• /
• v.18 no.5
• /
• pp.1315-1324
• /
• 2018

A novel three-phase four-wire inverter topology is presented in this paper. This topology is equipped with a special capacitor balance grid without magnetic saturation. In response to unbalanced load and unequal split DC-link capacitors problems, a qusi-full-bridge DC/DC topology is applied in the balance grid. By using a high-frequency transformer, the energy transfer within the two split dc-link capacitors is realized. The novel topology makes the voltage across two split dc-link capacitors balanced so that the neutral point voltage ripple is inhibited. Under the condition of a stable neutral point voltage, the three-phase four-wire inverter can be equivalent to three independent single phase inverters. As a result, the three-phase inverter can produce symmetrical voltage waves with an unbalanced load. To avoid forward transformer magnetic saturation, the voltages of the primary and secondary windings are controlled to reverse once during each switching period. Furthermore, an improved mode chosen operating principle for this novel topology is designed and analyzed in detail. The simulated results verified the feasibility of this topology and an experimental inverter has been built to test the power quality produced by this topology. Finally, simulation results verify that the novel topology can effectively improve the inhibition of an inverter with a three-phase unbalanced load while decreasing the value of the split capacitor.

• Journal of Chest Surgery
• /
• v.50 no.3
• /
• pp.177-183
• /
• 2017

Background: To improve postoperative outcomes associated with interstitial pneumonia (IP) in patients with lung cancer, the management of the postoperative acute exacerbation of IP (PAEIP) was investigated. Methods: Patients with primary lung cancer were considered to be at risk for PAEIP (possible PAEIP) based on a preoperative evaluation. The early phase of this study was from January 2001 to December 2008, and the late phase was from January 2009 to December 2014. In the early phase, chest computed tomography (CT) was performed for patients for whom PAEIP was suspected based on their symptoms, whereas in the late phase, chest CT was routinely performed within a few days postoperatively. The numbers of possible PAEIP cases, actual PAEIP cases, and deaths within 90 days due to PAEIP were compared between both phases. Results: In the early and late phases, surgery was performed in 712 and 617 patients, 31 and 72 possible PAEIP cases were observed, nine and 12 actual PAEIP cases occurred, and the mean interval from the detection of PAEIP to starting treatment was $7.3{\pm}2.3$ and $5.0{\pm}1.8$ days, respectively. Five patients died in the early phase, and one patient died in the late phase. Significantly fewer PAEIP-related deaths were observed in the late phase (p<0.05). Conclusion: Identifying patients at risk for PAEIP by routine postoperative CT examinations led to the early diagnosis and treatment of PAEIP, resulting in the reduction of PAEIP-related mortality.

• Journal of Mechanical Science and Technology
• /
• v.17 no.3
• /
• pp.449-456
• /
• 2003

In this study, numerical and experimental analysis on the spray atomization characteristics of a GDI injector is performed. For numerical approach, four hybrid models that are composed of primary and secondary breakup model are considered. Concerning the primary breakup, a conical sheet disintegration model and LISA model are used. The secondary breakup models are made based on the DDB model and RT model. The global spray behavior is also visualized by the shadowgraph technique and local Sauter mean diameter and axial mean velocity are measured by using phase Doppler particle analyzer Based on the comparison of numerical and experimental results, it is shown that good agreement is obtained in terms of spray developing process and spray tip penetration at the all hybrid models. However, the hybrid breakup models show different prediction of accuracy in the cases of local SMD and the spatial distribution of breakup.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.4 no.1
• /
• pp.12-16
• /
• 1999

Xenorhabdus nematophilus sp., an insect-pathogenic bacterium, was newly isolated from Korean entomopathogenic nematode of Steinernema carpocapsae, which can be used as a useful bioinsecticide. Primary and secondary form variants of Xenorhabdus nematophilus were observed when cultured in vitro. Primary form variants adsorbed bromothymol blue, while secondary form did not. However, many other characters of two variants were very similar. The variants were all rod-shaped and cell size was highly variable ranging from 0.5 by 2.0 ${\mu}$m to 1.0 by 5.0 ${\mu}$m. Both produced highly toxic substances and killed the insect larva within 20∼38 hr, indicating that insect pathogenicity of Xenorhabdus is not directly associated with its phase variation. In addition, cell-free culture supernatant of Xenorhabdus was sufficient to kill the insect larva by injecting it ito insect hemolymph; however, cell-harboring culture broth was more effective for killing the insect. The use of Xenorhabdus nematophilus may provide a potential alternative to Bacillus thuringiensis (Bt) toxins.