• 지역연구
• /
• 제13권2호
• /
• pp.45-54
• /
• 1997

A regional economy is characterized as a spatial economy. However the literature shows that it has been treated as a point economy since space is little recognized in regional modeling due to mathematical complication. This leads to the fact that regional model does not sufficiently represent regional characteristic. This paper attempts to construct a regional growth model in a partial equilibrium framework specifically taking into consideration land as a primary factor. The model is formulated largely neoclassical. Labor is assumed to move in response to differences in the wage rate, while capital is perfectly mobile across regions. The paper shows that two growth equilibrium points exist, one stable equilibrium point and the other unstable equilibrium point. The unstable growth equilibrium indicates the existence of minimum threshold that a region must overcome the minimum threshold to grow constantly. Consequently, directions of regional growth are characterized by two growth paths depending on the initial condition of a region. That is to say, a region below the minimum threshold is converging toward the lower stable equilibrium point over time. When a regional economy initially lies above the minimum threshold, it will grow forever. A regional economy is not thus necessarily converging a stationary is not thus necessarily converging a stationary equilibrium point through factor movement. Finally, the impacts of the presence of agglomeration economies and diseconomies are analyzed through the phase diagram. The paper also shows that agglomeration economies result in lowering the minimum threshold and in escalating the level of stable equilibrium However, when agglomeration diseconomies prevail, the results are opposite, i.e., rising the minimum threshold of growth and lowering the growth level of stable equilibrium.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권7호
• /
• pp.3414-3434
• /
• 2016

Classical key generation is complicated to update and key distribution generally requires fixed infrastructures. In order to eliminate these restrictions researchers have focused much attention on physical-layer (PHY-layer) based key generation methods. In this paper, we present a PHY-layer fingerprints based fuzzy key generation scheme, which works to prevent primary user emulation (PUE) attacks and spectrum sensing data falsification (SSDF) attacks, with multi-node collaborative defense strategies. We also propose two algorithms, the EA algorithm and the TA algorithm, to defend against eavesdropping attacks and tampering attacks in mobile cognitive radio networks (CRNs). We give security analyses of these algorithms in both the spatial and temporal domains, and prove the upper bound of the entropy loss in theory. We present a simulation result based on a MIMO-OFDM communication system which shows that the channel response characteristics received by legitimates tend to be consistent and phase characteristics are much more robust for key generation in mobile CRNs. In addition, NIST statistical tests show that the generated key in our proposed approach is secure and reliable.

• 한국측량학회지
• /
• 제34권2호
• /
• pp.161-169
• /
• 2016

This paper is intended to propose a novel approach to select an optimal site for a small-scaled artificial recharge system installation using TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) with geospatial data. TOPSIS is a MCDM (Multi-Criteria Decision Making) method to choose the preferred one of derived alternatives by calculating the relative closeness to an ideal solution. For applying TOPSIS, in the first, the topographic shape representing optimal recovery efficiency is defined based on a hydraulic model experiment, and then an appropriate surface slope is determined for the security of a self-purification capability with DEM (Digital Elevation Model). In the second phase, the candidate areas are extracted from an alluvial map through a morphology operation, because local alluvium with a lengthy and narrow shape could be satisfied with a primary condition for the optimal site. Thirdly, a shape file over all candidate areas was generated and criteria and their values were assigned according to hydrogeologic attributes. Finally, TOPSIS algorithm was applied to a shape file to place the order preference of candidate sites.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.30-39
• /
• 2001

The direct injection into the cylinders has been regarded as a way of the reduction in fuel consumption and pollutant emissions. The spray produced by the high pressure injector is of paramount importance in DISI(Direct Injection Spark Ignition) engines in that the primary atomization process must meet the requirement of quick and complete evaporation, mixing with air and combustion especially to prohibit the excessive HC emissions. The interaction between air flow and fuel spray was investigated in a steady flow system embodied in a wind tunnel to simulate the variety of flow inside the cylinder of the DISI engine. The direct Mie scattered and shadowgraph images presented the macroscopic view of the liquid sprays and vapor fields. The velocity and particle size of fuel droplets were investigated by phase doppler anenometer(PDA) system. The processes of atomization and evaporation with a DISI injector were observed and consequently utilized to construct the data-base for the spray and fuel-air mixing mechanism as a function of the flow characteristics.

• 한국동물위생학회지
• /
• 제30권2호
• /
• pp.251-258
• /
• 2007

Bovine brucellosis has occurred for years in Gyeonggi province under the national test and slaughter scheme. The serum agglutination test (SAT) is a diagnostic tool to confirm the disease despite the argument on its specificity. We selected 8 farms where only one or two individuals were diagnosed as brucellosis through SAT at the primary regular herd check and isolated the causative organism and characterized the species by species-specific PCR. The pathogen isolation was successful in 6 farms out of 8 farms by microbiological culture, showing the successful rate of 75%. The isolation rate of the causative organism represents 70% from supra-mammary lymph node and 60% from uterine tissues. They were characterized as Brucella abortus biovar 1 after biotyping by PCR, showing the fragment of 498 bp. Five of 8 farms were diagnosed as brucellosis two to four times more over the intervals of two or three months. Here in this study we briefly showed the correlation of the sporadic outbreak of brucellosis tested by SAT and the isolation of the causative organism. Moreover one or two reactors against brucellosis among considerable size of herd may indicate that SAT failed to detect potentially infected individuals in the incubation stage or chronic phase of the disease.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.858-861
• /
• 2006

In this paper, a study on the noise reduction in a mobile fuel cell system is presented. Among various fuel cell systems around 20W capacities designed for mobile electronic devices, the active direct methanol fuel cell (DMFC) systems have been recently developed. In such systems, the primary noise source is the air pump which provides sufficient air flow ($5{\sim}6$ liter/min) for electrochemical reaction with methanol fuel while the noise contributions from other auxiliary parts are relatively small. Especially, the discrete noise tones generated by the air pump are dominant and those frequency peaks related to the rotor harmonics are needed to be suppressed by a silencer. Therefore. the Herschel/Quinke (HQ) tubes, which use the out-of-phase cancellation of acoustic waves propagating through direct and indirect pathways, are applied to the inlet of the air pump. Performance of noise reduction with HQ silencer is analytically estimated by calculating the transmission. The length and number of thin HQ tubes are optimized to decrease the radiated noise. As a result, the sound pressure level could be successfully reduced by about 10 dB after applying three serially connected HQ tubes.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.4821-4830
• /
• 2014

본 논문은 그래픽 디자인에서 디자인리서치의 중요성과 사회와 인간과 함께하는 디자인적 방법(Design tools)의 이해 고취가 목표이다. 본 연구는 총 60명을 대상으로 연구를 진행하였으며, 참여자들은 IDEO 툴킷(방법)을 활용하였다. 총 세 개의 설문조사가 이루어졌으면 두 개의 설문지는 동일한 형태로 프로젝트 참여 '사전'과 '사후'에 각각 사용되었다. 마지막은 학생들의 작업을 평가하기 위해 전문가 6인의 조사가 이루어졌다. 예비분석에서는 학생들의 프로젝트 이전의 리서치 경향 인터넷과 문헌자료에 의존도가 매우 높고 체계적인 연구의 형태를 보이지 않았다. 본 분석을 통해서는 리서치에 많은 시간을 할애하고 디자인적 방법을 사용한 그룹의 평가가 긍정적으로 나타났다. 특히, '관찰'기법을 이용한 그룹의 긍정적 평가가 높게 나타났다.

• 한국재난정보학회 논문집
• /
• 제13권2호
• /
• pp.147-154
• /
• 2017

듀플렉스 스테인리스강은 일반 오스테나이트계 스테인리스강과는 다른 열적, 기계적 성질로 인하여 일반 스테인리스강과는 다른 잔류응력 크기와 분포를 가진다. 따라서 듀플렉스 스테인리스강을 강구조물에 적용시키기 위해서는 용접부의 잔류응력 특성에 대한 연구가 반드시 선행되어야 한다. 본 연구에서는 듀플렉스 스테인리스강 용접시 발생하는 잔류응력을 스트레인 게이지를 이용한 응력 이완법을 이용하여 실험적으로 측정하여 용접부의 잔류응력 특징을 조사하였다.

• 방송공학회논문지
• /
• 제21권2호
• /
• pp.261-267
• /
• 2016

본 논문에서는 타이밍 오프셋 보상을 위한 위상 전 왜곡 기법, 파일럿 성분 추정과 제거를 위한 직류 제거기, 송수신 신호 사이의 상관도를 기반으로 귀환 신호의 지연 시간을 추정하는 기법을 이용한 DAB(Digital Audio Broadcasting)용 간섭 제거 기반 동일 채널 중계기를 제안하고, 이를 ATSC(Advanced Television Systems Committee)시스템에 적용한다. 제안한 간섭 제거 기반의 동일 채널 중계기는 주송신 신호보다 간섭 신호가 더 큰 환경에서의 간섭 제거 능력이 확인되었으며, 이에 따라 중계기의 송출 능력의 개선, 짧은 처리 지연 시간과 더불어 양호한 신호 품질이 얻어짐을 시뮬레이션을 통하여 확인한다.

• 한국표면공학회지
• /
• 제32권6호
• /
• pp.709-716
• /
• 1999

Ceramic is select for an alternative substrate material for high-speed circuits due to its low-thermal expansion. As, in this study, ceramic was prepared by ISG (interlayer sol-gel) process using metal salts and a metal alkoxide as the starting materials. Generally ceramic substrate is used electroless copper plating for the metallization. But it has been indicate weakely the adhesion strength between the substrate and copper layer. Therefore, this research, using the ISG process on the preparation of homogeneous and possible preparation at law temperature fabricated sol solution. Using of the dip coating method was coated for the purpose of giving the anchoring effect on the coating layer and enhancing the adhesion strength between the $Al_2$O$_3$ substrate and copper layer. This study examined primary the characteristic of the sol making condition and differential thermal analysis (DTA) X-ray diffraction (XRD) were mearsured to identify the crystal phase of heat treatment specimens. The morphology of the coated films were studied by scanning electron microscopy(SEM). As a resurt, XRD analysis was obtained patterns of $\alpha$-cordierite after heat-treatment about 2 hours at $1000^{\circ}C$. SEM analysis could have seen a large number of voids on coated film. The more contants of$ Al_2$$O_3$ Wt% was increased the more voids was advanced. Peel adhesion strength has a maximum in the contants of the TEOS:ANE of 1:0.7 mole%. In this case, adhesion strength has been measured 1150gf, peel adhesion strength were about 10 times more than uncoated of the ceramics film.