• Journal of the Korean Regional Science Association
• /
• v.13 no.2
• /
• pp.45-54
• /
• 1997

A regional economy is characterized as a spatial economy. However the literature shows that it has been treated as a point economy since space is little recognized in regional modeling due to mathematical complication. This leads to the fact that regional model does not sufficiently represent regional characteristic. This paper attempts to construct a regional growth model in a partial equilibrium framework specifically taking into consideration land as a primary factor. The model is formulated largely neoclassical. Labor is assumed to move in response to differences in the wage rate, while capital is perfectly mobile across regions. The paper shows that two growth equilibrium points exist, one stable equilibrium point and the other unstable equilibrium point. The unstable growth equilibrium indicates the existence of minimum threshold that a region must overcome the minimum threshold to grow constantly. Consequently, directions of regional growth are characterized by two growth paths depending on the initial condition of a region. That is to say, a region below the minimum threshold is converging toward the lower stable equilibrium point over time. When a regional economy initially lies above the minimum threshold, it will grow forever. A regional economy is not thus necessarily converging a stationary is not thus necessarily converging a stationary equilibrium point through factor movement. Finally, the impacts of the presence of agglomeration economies and diseconomies are analyzed through the phase diagram. The paper also shows that agglomeration economies result in lowering the minimum threshold and in escalating the level of stable equilibrium However, when agglomeration diseconomies prevail, the results are opposite, i.e., rising the minimum threshold of growth and lowering the growth level of stable equilibrium.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.7
• /
• pp.3414-3434
• /
• 2016

Classical key generation is complicated to update and key distribution generally requires fixed infrastructures. In order to eliminate these restrictions researchers have focused much attention on physical-layer (PHY-layer) based key generation methods. In this paper, we present a PHY-layer fingerprints based fuzzy key generation scheme, which works to prevent primary user emulation (PUE) attacks and spectrum sensing data falsification (SSDF) attacks, with multi-node collaborative defense strategies. We also propose two algorithms, the EA algorithm and the TA algorithm, to defend against eavesdropping attacks and tampering attacks in mobile cognitive radio networks (CRNs). We give security analyses of these algorithms in both the spatial and temporal domains, and prove the upper bound of the entropy loss in theory. We present a simulation result based on a MIMO-OFDM communication system which shows that the channel response characteristics received by legitimates tend to be consistent and phase characteristics are much more robust for key generation in mobile CRNs. In addition, NIST statistical tests show that the generated key in our proposed approach is secure and reliable.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.2
• /
• pp.161-169
• /
• 2016

This paper is intended to propose a novel approach to select an optimal site for a small-scaled artificial recharge system installation using TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) with geospatial data. TOPSIS is a MCDM (Multi-Criteria Decision Making) method to choose the preferred one of derived alternatives by calculating the relative closeness to an ideal solution. For applying TOPSIS, in the first, the topographic shape representing optimal recovery efficiency is defined based on a hydraulic model experiment, and then an appropriate surface slope is determined for the security of a self-purification capability with DEM (Digital Elevation Model). In the second phase, the candidate areas are extracted from an alluvial map through a morphology operation, because local alluvium with a lengthy and narrow shape could be satisfied with a primary condition for the optimal site. Thirdly, a shape file over all candidate areas was generated and criteria and their values were assigned according to hydrogeologic attributes. Finally, TOPSIS algorithm was applied to a shape file to place the order preference of candidate sites.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.30-39
• /
• 2001

The direct injection into the cylinders has been regarded as a way of the reduction in fuel consumption and pollutant emissions. The spray produced by the high pressure injector is of paramount importance in DISI(Direct Injection Spark Ignition) engines in that the primary atomization process must meet the requirement of quick and complete evaporation, mixing with air and combustion especially to prohibit the excessive HC emissions. The interaction between air flow and fuel spray was investigated in a steady flow system embodied in a wind tunnel to simulate the variety of flow inside the cylinder of the DISI engine. The direct Mie scattered and shadowgraph images presented the macroscopic view of the liquid sprays and vapor fields. The velocity and particle size of fuel droplets were investigated by phase doppler anenometer(PDA) system. The processes of atomization and evaporation with a DISI injector were observed and consequently utilized to construct the data-base for the spray and fuel-air mixing mechanism as a function of the flow characteristics.

• Korean Journal of Veterinary Service
• /
• v.30 no.2
• /
• pp.251-258
• /
• 2007

Bovine brucellosis has occurred for years in Gyeonggi province under the national test and slaughter scheme. The serum agglutination test (SAT) is a diagnostic tool to confirm the disease despite the argument on its specificity. We selected 8 farms where only one or two individuals were diagnosed as brucellosis through SAT at the primary regular herd check and isolated the causative organism and characterized the species by species-specific PCR. The pathogen isolation was successful in 6 farms out of 8 farms by microbiological culture, showing the successful rate of 75%. The isolation rate of the causative organism represents 70% from supra-mammary lymph node and 60% from uterine tissues. They were characterized as Brucella abortus biovar 1 after biotyping by PCR, showing the fragment of 498 bp. Five of 8 farms were diagnosed as brucellosis two to four times more over the intervals of two or three months. Here in this study we briefly showed the correlation of the sporadic outbreak of brucellosis tested by SAT and the isolation of the causative organism. Moreover one or two reactors against brucellosis among considerable size of herd may indicate that SAT failed to detect potentially infected individuals in the incubation stage or chronic phase of the disease.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.858-861
• /
• 2006

In this paper, a study on the noise reduction in a mobile fuel cell system is presented. Among various fuel cell systems around 20W capacities designed for mobile electronic devices, the active direct methanol fuel cell (DMFC) systems have been recently developed. In such systems, the primary noise source is the air pump which provides sufficient air flow ($5{\sim}6$ liter/min) for electrochemical reaction with methanol fuel while the noise contributions from other auxiliary parts are relatively small. Especially, the discrete noise tones generated by the air pump are dominant and those frequency peaks related to the rotor harmonics are needed to be suppressed by a silencer. Therefore. the Herschel/Quinke (HQ) tubes, which use the out-of-phase cancellation of acoustic waves propagating through direct and indirect pathways, are applied to the inlet of the air pump. Performance of noise reduction with HQ silencer is analytically estimated by calculating the transmission. The length and number of thin HQ tubes are optimized to decrease the radiated noise. As a result, the sound pressure level could be successfully reduced by about 10 dB after applying three serially connected HQ tubes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4821-4830
• /
• 2014

This paper highlights the importance of design research and encourages an understanding of design tools that engage society and people. Twenty groups, a total of sixty students, were asked to participate in this project and they used an IDEO tool kit. A total of three surveys were given. One survey was given to the participants before participating in the project and another after the project. The last survey was given to six experts to evaluate the students' work. Preliminary analysis found that students, prior to participating in the project, replied heavily on Internet research and a literature review, and did not display a structured research process. Primary analysis showed that the groups that spent more time on research and utilised design tools performed better, particularly those utilising 'observation' techniques.

• Journal of the Society of Disaster Information
• /
• v.13 no.2
• /
• pp.147-154
• /
• 2017

Duplex stainless steel finds increasing use as an alternative to austenitic stainless steel, particularly where chloride or sulphide stress corrosion cracking is of primary concern, due to the excellent combination of strength and corrosion resistance. During welding, duplex stainless steel does not create the same magnitude or distribution of weld-induced residual stresses as those in welded austenitic stainless steel due to the different physical and mechanical properties between them. In this work, an experimental study on the residual stresses in butt-welded duplex stainless steel is performed utilizing the layering technique to investigate the characteristics of residual stresses in the weldment.

• Journal of Broadcast Engineering
• /
• v.21 no.2
• /
• pp.261-267
• /
• 2016

In this paper, Method for the phase distortion compensation timing offset and DC eliminator for the pilot component estimation and removal, transmitted and received signal correlation in the delay scheme DAB interference cancellation based on the same channel for using for estimating the feedback signal based on a between for removal for the timing offset compensation It proposes a repeater. This was applied to the ATSC system. The on-channel repeater of the proposed interference cancellation based on the interference removing capability is improved in interference signal is 20dB greater than the primary transmission signal environment via the return channel estimation and improve performance RFP. Accordingly, it was confirmed by simulation that good signal is sent out with the improvement of the ability of the repeater.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.6
• /
• pp.709-716
• /
• 1999

Ceramic is select for an alternative substrate material for high-speed circuits due to its low-thermal expansion. As, in this study, ceramic was prepared by ISG (interlayer sol-gel) process using metal salts and a metal alkoxide as the starting materials. Generally ceramic substrate is used electroless copper plating for the metallization. But it has been indicate weakely the adhesion strength between the substrate and copper layer. Therefore, this research, using the ISG process on the preparation of homogeneous and possible preparation at law temperature fabricated sol solution. Using of the dip coating method was coated for the purpose of giving the anchoring effect on the coating layer and enhancing the adhesion strength between the $Al_2$O$_3$ substrate and copper layer. This study examined primary the characteristic of the sol making condition and differential thermal analysis (DTA) X-ray diffraction (XRD) were mearsured to identify the crystal phase of heat treatment specimens. The morphology of the coated films were studied by scanning electron microscopy(SEM). As a resurt, XRD analysis was obtained patterns of $\alpha$-cordierite after heat-treatment about 2 hours at $1000^{\circ}C$. SEM analysis could have seen a large number of voids on coated film. The more contants of$ Al_2$$O_3$ Wt% was increased the more voids was advanced. Peel adhesion strength has a maximum in the contants of the TEOS:ANE of 1:0.7 mole%. In this case, adhesion strength has been measured 1150gf, peel adhesion strength were about 10 times more than uncoated of the ceramics film.