• 대한화장품학회지
• /
• 제47권2호
• /
• pp.99-105
• /
• 2021

본 연구는 울릉도 돌외(Gynostemma pentaphyllum) 잎으로부터 캘러스 유도 및 추출한 후, 피부장벽 기능과 관련된 항염증, 항알러지, 각질세포외막 형성, S. aureus에 의한 각질형성세포 손상 완화 효능을 확인하고자 수행되었다. 돌외 캘러스 추출물의 피부에 대한 항염증 효능을 확인하기 위해, PAR-2 agonist로 활성화된 primary epidermal keratinocyte (HEKa)에서 염증성 사이토카인들의 발현을 확인한 결과, 돌외 캘러스 추출물은 IL-8, IL-25, TSLP 발현을 저해하는 효능이 있는 것을 확인하였다. RBL-2H3 세포를 이용한 β-hexosaminidase assay 시험을 통해 항알러지 효능을 확인한 결과, β-hexosaminidase 방출을 억제하는 효과를 보였다. 또한, 돌외 캘러스 추출물은 HaCaT 세포에서 각질세포외막(cornified envelope) 형성 효과가 있음을 확인하였고, HaCaT 세포와 S. aureus 공배양 실험을 통해 S. aureus에 의한 각질형성세포 생존율 감소를 완화하는 효능이 있음을 확인하였다. 본 연구 결과를 종합해보면, 울릉도 돌외 캘러스 추출물은 항염, 항알러지, S. aureus에 의한 각질세포 손상 완화 효능에 유효한 소재의 가능성을 확인하였고, 피부장벽 개선을 위한 화장품 소재로서 활용 가치가 있을 것으로 판단된다.

• 전기학회논문지
• /
• 제60권6호
• /
• pp.1274-1279
• /
• 2011

The purpose of this paper is to present the manufacturing defect and damage pattern of a 3 phase 22.9/3.3kV oil immersed transformer, as well as to present an objective basis for the prevention of a similar accident and to secure data for the settlement of PL related disputes. It was found that in order to prevent the occurrence of accidents to transformers, insulating oil analysis, thermal image measurement, and corona discharge diagnosis, etc., were performed by establishing relevant regulation. The result of analysis performed on the external appearance of a transformer to which an accident occurred, the internal insulation resistance and protection system, etc., showed that most of the analysis items were judged to be acceptable. However, it was found that the insulation characteristics between the primary winding and the enclosure, those between the ground and the secondary winding, and those between the primary and secondary windings were inappropriate due to an insulating oil leak caused by damage to the pressure relief valve. From the analysis of the acidity values measured over the past 5 years, it is thought that an increase in carbon dioxide (CO2) caused an increase in the temperature inside the transformer and the increase in the ethylene gas increased the possibility of ignition. Even though 17 years have passed since the transformer was installed, it was found that the system's design, manufacture, maintenance and management have been performed well and the insulating paper was in good condition, and that there was no trace of public access or vandalism. However, in the case of transformers to which accidents have occurred, a melted area between the upper and the intermediate bobbins of the W-phase secondary winding as well as between its intermediate and lower bobbins. It can be seen that a V-pattern was formed at the carbonized area of the transformer and that the depth of the carbonization is deeper at the upper side than the lower side. In addition, it was found that physical bending and deformation occurred inside the secondary winding due to non-uniform pressure while performing transformer winding work. Therefore, since it is obvious that the accident occurred due to a manufacturing defect (winding work defect), it is thought that the manufacturer of the transformer is responsible for the accident and that it is lawful for the manufacture to investigate and prove the concrete cause of the accident according to the Product Liability Law (PLL).

• 한국응용곤충학회지
• /
• 제55권4호
• /
• pp.483-487
• /
• 2016

최근 감귤에서 볼록총채벌레의 피해가 증가하고 있다. 볼록총채벌레의 발생시기 및 피해증상에 관한 연구는 진행되었으나 주변 기주식물과의 관계에 관한 연구는 미흡한 실정이다. 본 연구는 볼록총채벌레 기주식물 150여 가지 중 제주도에 넓은 면적으로 재배되고 있는 망고, 키위 등의 1차 기주식물과 2차 기주식물인 감귤에서의 볼록총채벌레 발생의 유연관계를 구명하기 위해 수행되었다. 그 결과 1차 기주식물과원과 인접 감귤원의 볼록총채벌레 발생양상의 경우 밀도의 차이가 있을 뿐 발생 시기는 거의 동일하거나 감귤원에서의 발생이 약 1주일 가량 지연되어 나타났다. 1차 기주식물과원과 인접 감귤원의 트랩설치간격별 발생밀도의 경우 트랩설치간격이 짧을수록 총채벌레 포획수가 유의미하게 많았으며 과실 피해도 또한 유의미하게 높았다. 이는 1차 기주식물인 망고, 키위, 녹차 등이 인접 감귤원의 볼록총채벌레 발생에 직접적인 영향을 주고 있는 것을 나타내며 이는 추후 감귤원의 볼록총채벌레 방제연구에 기초자료로 활용 될 수 있을 것으로 생각된다.

• The Plant Pathology Journal
• /
• 제18권4호
• /
• pp.210-215
• /
• 2002

Four field experiments were carried out from 1998 to 1999 and from 1999 to 2000 growing seasons of potato to investigate the relationship between leafminers and Alternaria alternata. The experiments established differential susceptibility among potato varieties to alternaria leaf necrosis, relationship between leafminer infestation and the level of necrosis, use of insecticides to reduce leafminer and leaf necrosis damages, and use of polyester fleece to eliminate leafminer and eventually reduce leaf necrosis. Results of the study indicate that control of leafminer is of primary importance because this will automatically lead to control of the damage caused by A. alternata.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권4호
• /
• pp.434-440
• /
• 1998

Seven hybrid lines of Leucaena leucocephala $\times$ L. diversifolia and two control lines of L. leucocephala were compared for their adaptation to acid-soils and tolerance to damage by the psyllid, Heteropsyla cubana, at four locations over two years in Peninsular Malaysia. Primary data on leaf composition and in vitro digestibility (nutrition variables) and secondary data on plant height, stem girth and psyllid damage (agronomy variables) were the measures of performance. Cluster solutions of the nine lines were different within locations, between locations and between years for nutrition and agronomy variables. Controls and hybrids did not cluster separately. Principal component scores of the nine lines gave rank orders which were different by location and by year. No performance trend could be detected between hybrids and controls. The conclusion is that nutritional and agronomic characteristics in Leucaena are independent, soil composition and weather did not consistently affect performance, and evidence is inconclusive as to the benefits of interspecific crossing with L. diversifolia.

• Tribology and Lubricants
• /
• 제15권3호
• /
• pp.272-277
• /
• 1999

The objective of this investigation is to examine the influence of the micro catheters, which mimic the intravascular micro active endoscopes, on local pressure changes and flow rate in an arterial branch model similar to the femoral artery of human. The effects of branch to main lumen flow rate ratios and the locations of a catheter tip were found to be significant on the local pressure changes. Relatively large pressure drops and an increase in shear stress due to the obstruction effects may induce an endothelial cell damage and a change in arterial wall permeability, which have been reported to be the primary cause of the initiation of the atherosclerosis and other major vascular diseases.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.245-249
• /
• 2001

This paper is concerned with numerical analyses for bulk forming of a single crystal milli-product, whose typical size ranges from a few hundreds ${\mu}m$ to a few mm. The numerical formulation invoked in this paper combines the crystal plasticity theory considering texture development and the ductile damage mechanics for growth of micro voids, since orientation development and growth of micro voids become the primary factors for bulk forming of milli-size products. As applications, milli-extrusion of a single crystal round bar and milli-rolling of a single crystal plate are simulated and the results are discussed in detail.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.16-23
• /
• 2013

It is important that proving ground damage is correlated with target customer usage. This paper describes the test mode for durability test of active suspension control system for proving ground correlation and optimization. Acceleration, strain, wheel force and other types of data are collected on a vehicle as it traverses different proving ground surfaces. The primary objective of the analysis is to determine which mixture of proving ground surfaces offers the best representation of customer usage while minimizing the total test time. And durability testing offers the best way to assess the capability of a product to reach its reliability target. The test should be representative of the real environmental load and replicate the same customer usage.

• Journal of Radiation Protection and Research
• /
• 제45권1호
• /
• pp.11-15
• /
• 2020

Background: There have been various studies to investigate the mechanisms of DNA damage from low-energy electrons. To understand the mechanism of these strand breaks, it is necessary to investigate the dissociation mechanism of the DNA constituents, that is, bases, sugars, and phosphates. Materials and Methods: We studied the dissociation of thymine base upon interaction with low-energy electrons. For this experiment, thymine powder was pressed onto the indium base and irradiated by 5 eV electrons. Results and Discussion: Non-irradiated and irradiated thymine samples were compared and analyzed using the X-ray photoelectron spectroscopic technique to analyze the dissociation patterns of the molecular bonds after low-energy electron irradiation of thymine. Conclusion: With 5 eV electron irradiation, C-C and N-C = O bonds are the primary dissociations that occur in thymine molecules.

• Computers and Concrete
• /
• 제4권2호
• /
• pp.101-117
• /
• 2007

A new model predicting the nonlinear basic creep behaviour of concrete structures subjected to high multi-axial stresses is proposed. It combines a model based on the thermodynamic framework of the elasto-plastic continuum damage theory for time-independent material behaviour and a rheological model describing phenomenologically the long-term delayed deformation. Strength increase due to ageing is regarded. The general 3D solution for the creep theory is derived from a rate-type form of the uniaxial formulation by the assumption of associated creep flow and a theorem of energy equivalence. The model is able to reproduce linear primary creep as well as secondary and tertiary creep stages under high compressive stresses. For concrete in tension a simple viscoelastic formulation is applied. The material law is then incorporated into a finite element solution procedure for analysis of reinforced concrete structures. Numerical examples of uniaxial creep tests and concrete members show excellent agreement with experimental results.