• Title/Summary/Keyword: primary curve

Search Result 349, Processing Time 0.027 seconds

Mg II LINE VARIATION OF 32 CYGNI

  • Kang, Young-Woon
    • Journal of Astronomy and Space Sciences
    • /
    • v.9 no.2
    • /
    • pp.154-164
    • /
    • 1992
  • The Mg II lines been extracted from the IUE archival spectra of 32 Cygni to investigate the effect of the atmospheric eclipse. The UV light curve has been reduced from the continuum flux at the center wavelength of 2807.5 ${\AA}$ in the IUE spectra. The equivalent width of the Mg II k absoption line has been measured for each spectra. The results of the light variation and flux tracing of the absorption line at the vicinity of the primary eclipse confirmed the atmospheric eclipse. The atmospheric effect lasted until the phase 0.06 in the absorptin line tracing, while it lasted until the phase 0.02 in the UV light curve, respectively.

  • PDF

Required Time for Isotopic and Ko Consolidation of Marine Clay in Triaxial Cell (삼축셀에서 해성점토의 등방 및 Ko 압밀소요 시간)

  • Lee, Kyeong-Jun;Jung, Du-Hwoe;Im, Jong-Chul
    • Journal of the Korean Geotechnical Society
    • /
    • v.23 no.8
    • /
    • pp.137-147
    • /
    • 2007
  • Isotropic (instant loading) and Ko (gradual increase loading) consolidation tests were conducted in triaxial test equipment using cylindrical sample (5.0 cm in diameter and 10.0 cm in height) on two marine clay deposits. The duration of primary consolidation was estimated by two curve fitting methods using measured strain. A differential equation of consolidation for drainage in the radial and vertical direction was solved by the implicit finite difference scheme. The results of two curve fitting methods were compared with the numerical solutions to evaluate the appropriate axial loading rate of Ko consolidation and the primary consolidation periods. In addition, primary consolidation periods of the samples with a diameter of 35 mm and a height of 70 mm were calculated. The relation of radial and vertical consolidation coefficients is also presented.

Dynamic Resistance Monitoring in Primary Circuit during Resistatnce Spot Welding (저항 점용접의 1차 회로 동저항 모니처링에 관한 연구)

  • 조용준;황정복;신현일;배경민;권태용;이세헌
    • Proceedings of the KWS Conference
    • /
    • 1998.10a
    • /
    • pp.129-132
    • /
    • 1998
  • The dynamic resistance monitoring in primary circuit or T/C is one of the important issues in that in-process and real time quality assurance of resistance spot weld is needed to increase the product reliability. It is well known that tile dynamic resistance curve gives us very useful information about nugget growth and weldability. In the present paper, a new dynamic resistance detecting method is presented as a practical manner of weld quality assurance using instantaneous current and voltage measured by primary circuit. Primary dynamic resistance patterns are basically similar to those of the secondary, but there is evident advantage such as no extra devices are needed to obtain the quality assurance index and eventually feedback control will be possible caused by T/C based monitoring system.

  • PDF

Intelligent quality estimation system using primary circuit variables of RSW (저항점용접 1차 공정변수를 이용한 지능형 용접품질 판단 시스템)

  • 조용준;이세헌;신현일;배경민;권태용
    • Proceedings of the KWS Conference
    • /
    • 1999.10a
    • /
    • pp.142-145
    • /
    • 1999
  • The dynamic resistance monitoring is one of the important issues in that in-process and real time quality assurance of resistance spot weld is needed to increase the product reliability. Secondary dynamic resistance patterns, as a real manner, are hard to adapt those factors in real time and in-plant system. In the present study, a new dynamic resistance detecting method is presented as a practical manner of weld quality assurance at the primary circuit. By the correlation analysis, it is found that the primary dynamic resistance patterns are basically similar to those of the secondary. Various dynamic resistance indices are characterized with the primary curve. And quality of the weld, like the tensile shear strength, is estimated using adaptive neuro-fuzzy estimation system which is consisted of the Sugeno fuzzy algorithm. Through the fuzzy clustering and parameter optimization, real time weld quality assurance system with less efforts is proposed.

  • PDF

Design of the secondary tunnel lining using a ground-primary support-secondary lining interaction model

  • Chang, Seok-Bue;Seo, Seong-Ho;Lee, Sang-Duk
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 2003.11a
    • /
    • pp.109-114
    • /
    • 2003
  • It is the common practice to reinforce excessively the secondary tunnel lining due to the lack of rational insights into the ground loosening loads. The main load of the secondary lining for drained-type tunnels is the ground loosening. The main cause of the load for secondary tunnel lining is the deterioration of the primary support members such as shotcrete, steel ribs, and rockbolts. Accordingly, the development of the analysis model to consider the ground-primary supports-secondary lining interaction is very important for the rational design of the secondary tunnel lining. In this paper, the interaction is conceptually described by the simple mass-spring model and the load transfer from the primary supports to the ground and the secondary lining is showed by the characteristic curves including the secondary lining reaction curve for the theoretical solution of a circular tunnel. And also, the application of this model to numerical analysis is verified in order to review the potential tool for practical tunnel problems with the complex conditions like non-circular shaped tunnels, multi-layered ground, sequential excavation and so on.

  • PDF

Compensation Algorithm for a Measurement Voltage Transformer (측정용 전압 변성기 오차 보상 알고리즘)

  • Kang, Yong-Cheol;Park, Jang-Min;Lee, Mi-Sun;Jang, Sung-Il;Kim, Yong-Gyun
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.57 no.5
    • /
    • pp.761-766
    • /
    • 2008
  • This paper describes a compensation algorithm for a measurement voltage transformer (VT) based on the hysteresis characteristics of the core. The error of the VT is caused by the voltages across the primary and secondary windings. The latter depends on the secondary current whilst the former depends on the primary current, i.e. the sum of the exciting current and the secondary current. The proposed algorithm calculates the voltages across the primary and secondary windings and add them to the measured secondary voltage for compensation. To do this, the primary and secondary currents should be estimated. The secondary current is obtained directly from the secondary voltage and used to calculate the voltage across the secondary winding. For the primary current, in this paper, the exciting current is decomposed into the two currents, i.e. the core-loss current and the magnetizing current. The core-loss current is obtained by dividing the primary induced voltage by the core-loss resistance. The magnetizing current is obtained by inserting the flux into the flux-magnetizing current curve. The calculated voltages across the primary and secondary windings are added to the measured secondary current for compensation. The proposed compensation algorithm improves the error of the VT significantly.

AN ANALYSIS OF THE LIGHT AND RADIAL VELOCITY CURVES OF DO CAS (식쌍성 DO Cas의 광도곡선과 시선속도곡선의 분석)

  • 안영숙;김호일;이우백
    • Journal of Astronomy and Space Sciences
    • /
    • v.17 no.2
    • /
    • pp.181-188
    • /
    • 2000
  • DO Cas is a short period (P=0.68day) eclipsing binary star and is classified as a near-contact binary by Shaw(1990). There is no published radial velocity curve for this short period binary after Mannino(1958). Hill(1991) suspected that Mannino's radial velocity curve had some serious mistake. So, we scanned the original plates used by Mannino with PDS and the spectra were employed to IRAF packages to estimate the radial velocities. The radial velocity curve and the BVR light curves made by us in 1998 were analyzed simultaneously with Wilson-Devinney code. We found that DO Cas is a contact or near-contact binary which the primary component fills its Roche lobe and we also estimated the absolute dimensions of each components of this system.

  • PDF

Estimation of viscous and Coulomb damping from free-vibration data by a least-squares curve-fitting analysis

  • Slemp, Wesley C.H.;Hallauer, William L. Jr.;Kapania, Rakesh K.
    • Smart Structures and Systems
    • /
    • v.4 no.3
    • /
    • pp.279-290
    • /
    • 2008
  • The modeling and parameter estimation of a damped one-degree-of-freedom mass-spring system is examined. This paper presents a method for estimating the system parameters (damping coefficients and natural frequency) from measured free-vibration motion of a system that is modeled to include both subcritical viscous damping and kinetic Coulomb friction. The method applies a commercially available least-squares curve-fitting software function to fit the known solution of the equations of motion to the measured response. The method was tested through numerical simulation, and it was applied to experimental data collected from a laboratory mass-spring apparatus. The mass of this apparatus translates on linear bearings, which are the primary source of light inherent damping. Results indicate that the curve-fitting method is effective and accurate for both perfect and noisy measurements from a lightly damped mass-spring system.

Studies on the Fruiting Phase of Rape Under the Different Cultural Conditions

  • Kae, B.M.
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.12
    • /
    • pp.77-87
    • /
    • 1972
  • The fruiting phase of rape under transplanting and direct-sowing conditions has been studied at Mokpo during the 2 years period from 1970 to 1971. Two varieties, Yudal and Miyuki were used in this study. The planting space and sowing time were also incorporated into this study. The results could be summarized as follows: 1. The plant tape of rape was nearly umbrella-shaped of all, but has changed to the laid elliptical-shaped, broadly ovate and spindle-shaped under different varieties and cultural conditions in the plant diagram(Fig. 2). 2. The length of the primary branches for each nodes had a tendency to the symmetric apical curve with the apex at the upper 10-12th node in the transplanting. but to the upper bias apical curve with the apex at the upper 5-7th node in the dense-sowing(Fig.3). 3. The ear of main stem was longer, more pods, heavier 1, 000 grains and more grain yield than ear of primary branches of all, Especially, as for that, the rate of yield constitution per plant in the direct-sowing was higher than in the transplanting(Fig. 4, 5, 6, 7, 8, 9). 4. The ear-length of the primary branches for each nodes had a tendency to the relatively slowly apical curve with the apex at the upper 3-4th node in the transplanting, but to the lower bias apical curve with the apex at the upper 2nd node in the dense-sowing. Especially, the possibility of growth at the lower ears was few in the early variety (Fig. 4). 5. The number of pod per ear on the primary branches for each nodes had a .tendency to the curve of ear-length with the apex at the upper 5-8thnode in the transplanting and at the upper 4-5th node in the dense-sowing (Fig. 5). Accordingly, a high positive correlation was found between the ear-length and number of pod per ear (Table 2) 6. In the transplanting, the high rate of effective ear was from the upper nods to the 12th node, but below the 16-17th nodes was ineffective. However, in the early dense-sowing the high rate of effective was to the 7th node. but below the 10th nodes was. ineffective. Especially, in the early variety has difficult to secure of poi-numbers for ineffective of the lower nodes(Fig. 6.). 7. The density of pod setting of the ear of main stem was the longest of all ears, and the lower nods were, the shorter it became. That had a tendency to the evidently apical growth. However. in the early variety, it was lengthened according to growth of ear-length(Fig.7). 8. The pod-length of the medium nodes was longer than the upper and lower, and the possitive correlation between pod-length and number of grain per poi was very high(Table 2.). 9. In the grain yield per node of primary branches, the most yielding node of transplanting was the upper 9th node, of dense-sowing 4-5th node(Fig 8.), and the possitive correlation between grain yield per node and ear-length or number of pod per ear was very high(Table 2). 10. The grain yield of ear of main stem was higher than that of primary branches in the percentage of dependence for grain yield per plant. The limint node of 50% of dependence to cumulative grain yield per plant was the upper 7-8th node in tranplanting, in the early dense-sowing 4-5th node, and in tke late dense-sowing-3th node(Fig. 9). 11. In the weight of 1, 000 grains the lower nodes were, the lighter it becames in dense-sowing. Therefore, this was also lighter than in the transplanting to the (Fig. 10.). 12. The oil content of grain at the medium nodes was low in the early variety, but at the ear of main stem and upper 1st node it was extremely high(Fig. 11.).

  • PDF

INTEGRATION OF BICOMPLEX VALUED FUNCTION ALONG HYPERBOLIC CURVE

  • Chinmay Ghosh;Soumen Mondal
    • Korean Journal of Mathematics
    • /
    • v.31 no.3
    • /
    • pp.323-337
    • /
    • 2023
  • In this paper, we have defined bicomplex valued functions of bounded variations and rectifiable hyperbolic path. We have studied the integration of product-type bicomplex valued functions on rectifiable hyperbolic path. Also we have established bicomplex analogue of the Fundamental Theorem of Calculus for hyperbolic line integral.