• 한국압력기기공학회 논문집
• /
• 제12권1호
• /
• pp.30-40
• /
• 2016

The paper investigates the previous studies about welding residual stresses in nuclear components. First, various residual stress measurement methods are reviewed in applicability. Second a finite element welding residual stress analysis technique, which was developed from the viewpoint of FFS (Fitness-For-Service) assessment, is explained. Third, characteristics of the welding residual stresses on J-groove welds and butt welds were presented via investigating the previous studies. Last, engineering formulae for residual stresses in the FFS assessment codes such as R6 and API 579/ASME FFS-1 Code is summarized.

• 한국물환경학회지
• /
• 제22권5호
• /
• pp.831-837
• /
• 2006

The present study applies wavelet transform for the extraction of various periodicities which are included in TOC and pH time series of water quality and rainfall data. The primary objective of the present study is to detect the relationships between the respective data through the correlation analysis using the approximation components which are decomposed by wavelet transform. The results reveal the approximation components of TOC and pH in the 5th level of wavelet transform can explain more than 99% of the whole energy for the raw data respectively and there are considerably high correlation between the approximation components of the respective data used for the study even through no significant correlation between the raw data has been detected.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권4호
• /
• pp.233-240
• /
• 2015

We analyse reliability of multi-state UH-60 helicopter hydraulic pump system with a multi-functional standby component using Markov analysis method. The system consists of seven components: 2 main pumps, 1 standby pump, 2 primary servos, and 2 tail rotor servos. The standby pump can take over when one more than components fail. Therefore the standby pump is multi-functional standby component. The system has four states: good, deteriorated, dangerous, and failed. The components have 2 states: working and failed. We assume the system is unrepairable when the components fail. We estimate failure distributions and rates using collected failure time data in field. And we classify multi-state of the system according to emergency procedure of UH-60A student handout. We obtain the reliabilities of multi-state system using Visual Basic program because the differential equations is extremely complicated and tedious to solve.

• Nuclear Engineering and Technology
• /
• 제44권5호
• /
• pp.471-482
• /
• 2012

To assess the risk of nuclear power plant operation and to determine the risk impact of digital systems, there is a need to quantitatively assess the reliability of the digital systems in a justifiable manner. The Probabilistic Risk Analysis (PRA) is a tool which can reveal shortcomings of the NPP design in general and PRA analysts have not had sufficient guiding principles in modelling particular digital components malfunctions. Currently digital I&C systems are mostly analyzed simply and conventionally in PRA, based on failure mode and effects analysis and fault tree modelling. More dynamic approaches are still in the trial stage and can be difficult to apply in full scale PRA-models. As basic events CPU failures, application software failures and common cause failures (CCF) between identical components are modelled.The primary goal is to model dependencies. However, it is not clear which failure modes or system parts CCF:s should be postulated for. A clear distinction can be made between the treatment of protection and control systems. There is a general consensus that protection systems shall be included in PRA, while control systems can be treated in a limited manner. OECD/NEA CSNI Working Group on Risk Assessment (WGRisk) has set up a task group, called DIGREL, to develop taxonomy of failure modes of digital components for the purposes of PRA. The taxonomy is aimed to be the basis of future modelling and quantification efforts. It will also help to define a structure for data collection and to review PRA studies.

• Nuclear Engineering and Technology
• /
• 제29권5호
• /
• pp.361-367
• /
• 1997

The phase separation in ferrite phase of duplex stainless steel is the primary cause of thermal aging embrittlement of the LWR primary pressure boundary components. In this study the phase separation of simulated duplex stainless steel was detected by Mossbauer spectroscopy and magnetic property analysis by VSM(Vibrating Specimen Magnetometer). The simulated duplex stainless steels, Fe-Cr binary, Fe-Cr-Ni ternary, and Fe-Cr-Ni-Si quarternary allots, were aged at 370 and 40$0^{\circ}C$ up to 5,340 hours. It was observed from Mossbauer spectra analysis that internal magnetic field increases with aging time and from VSM that the specific saturation magnetization and Curie temperature increase with aging time. These result are indicative that phase separation into Fe-rich region and Cr-rich region is caused by thermal aging in the temperature range of 370~40$0^{\circ}C$ In cases of specimens containing Ni, the increase of specific saturation magnetization is much higher. This implies that Ni seems to promote Fe-Cr interdiffusion, which accelerates the phase separation into Fe-rich $\alpha$ phase and Cr-rich $\alpha$' phase.

• 한국학교ㆍ지역보건교육학회지
• /
• 제19권3호
• /
• pp.1-14
• /
• 2018

Objectives: The purpose of this study was to investigate the prevalence of metabolic syndrome and to find related factors according to the number of metabolic syndrome diagnostic components in Korean adolescents. Methods: The subjects of this study were 469 Korean adolescents aged from 12 to 18 enrolled in the 2016 Korea National Health and Nutrition Examination Survey. Statistical package R 3.4.2 was used for programming to apply diagnostic criterion of adolescent metabolic syndrome and for the analysis of the data such as weighted frequent analysis, weighted mean analysis and complex sampling design logistic regression analysis. Results: For adolescents 12 to 18 years of age, 2.55% had more than 2(${\geq_-}3$), 9.88% had more than 1(${\geq_-}2$) and 33.17% had more than 0(${\geq_-}1$) metabolic syndrome diagnostic components. It has been found that risk factors for no less than 2 metabolic syndrome diagnostic components were higher body mass index and higher stress, and risk factors for no less than 1 were higher body mass index, younger teenager and female. Conclusion: Obesity is the primary risk factor for the development of adolescent metabolic syndrome. Female or younger teenager are more likely to have one or more metabolic syndrome diagnostic components, and higher stress develop to the risk level of having two or more metabolic syndrome diagnostic components. Therefore, it is important to focus on obesity and stress management for the prevention and control of Korean adolescent metabolic syndrome.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.143-146
• /
• 2005

In modern automotive control modules, mechanical failures of surface mounted electronic components such as microprocessors, crystals, capacitors, transformers, inductors, and ball grid array packages, etc., are mai or roadblocks to design cycle time and product reliability. This paper presents a general methodology of failure analysis and fatigue prediction of these electronic components under automotive vibration environments. Mechanical performance of these packages is studied through finite element modeling approach fur given vibration environments in automotive application. Using the results of vibration simulation, fatigue lift is predicted based on cumulative damage analysis and material durability information. Detailed model of solder/lead joints is built to correlate the system level model and obtain solder strains/stresses. The primary focus in this paper is on surface-mount interconnect fatigue failures and the critical component selected for this analysis is 80 pin plastic leaded microprocessor.

• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.1036-1046
• /
• 2016

We propose a primary water stress corrosion cracking (PWSCC) initiation model of Alloy 600 that considers the stress triaxiality factor to apply to finite element analysis. We investigated the correlation between stress triaxiality effects and PWSCC growth behavior in cold-worked Alloy 600 stream generator tubes, and identified an additional stress triaxiality factor that can be added to Garud's PWSCC initiation model. By applying the proposed PWSCC initiation model considering the stress triaxiality factor, PWSCC growth simulations based on the macroscopic phenomenological damage mechanics approach were carried out on the PWSCC growth tests of various cold-worked Alloy 600 steam generator tubes and compact tension specimens. As a result, PWSCC growth behavior results from the finite element prediction are in good agreement with the experimental results.

• 한국식품영양과학회지
• /
• 제22권4호
• /
• pp.500-509
• /
• 1993

Pectins present in the primary cell walls and middle lamellae of plant cell walls are extracted by water, cheating agents, acid or alkali solutions. However, some neutral contaminating components are extracted in conjunction with pectins during the extraction process. Thus, the accurate characterization of physi-cochemical properties of pectins necessitates to get rid of the impurities. In this review, dialysis, alcohol precipitation, ion exchange chromatography and metal precipitation were compared as procedures to purify the pectin extracts. In addition, the chemical methods to analyze pectins are discussed in terms of three major chemical constituents, i.e., anhydrogalacturonic acid, methoxyl groups and neutral sugars.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.124-131
• /
• 1999

The axle spring is used in primary suspension component of railway vehicles. The most important factor of axle spring is to have adequate spring constant for comfortable feeling of ride. The non-linear properties of rubber which were important parameter to evaluate of rubber components, were determined by the characteristic test. The finite element analysis of the axle spring are executed to predict the behavior of deformation and stiffness by using commercial FEA code.