• The korean journal of orthodontics
• /
• v.49 no.6
• /
• pp.404-412
• /
• 2019

Objective: To assess shear bond strength and failure mode (Adhesive Remnant Index, ARI) of orthodontic brackets bonded to polymethylmethacrylate (PMMA) blocks for computer-aided design/manufacture (CAD/CAM) fabrication of temporary restorations, following substrate chemical or mechanical treatment. Methods: Two types of PMMA blocks were tested: $CAD-Temp^{(R)}$ (VITA) and $Telio^{(R)}$ CAD (Ivoclar-Vivadent). The substrate was roughened with 320-grit sandpaper, simulating a fine-grit diamond bur. Two universal adhesives, Scotchbond Universal Adhesive (SU) and Assure Plus (AP), and a conventional adhesive, Transbond XT Primer (XTP; control), were used in combination with Transbond XT Paste to bond the brackets. Six experimental groups were formed: (1) $CAD-Temp^{(R)}/SU$; (2) $CAD-Temp^{(R)}/AP$; (3) $CAD-Temp^{(R)}/XTP$; (4) $Telio^{(R)}$ CAD/SU; (5) $Telio^{(R)}$ CAD/AP; (6) $Telio^{(R)}$ CAD/XTP. Shear bond strength and ARI were assessed. On 1 extra block for each PMMA-based material surfaces were roughened with 180-grit sandpaper, simulating a normal/medium-grit ($100{\mu}m$) diamond bur, and brackets were bonded. Shear bond strengths and ARI scores were compared with those of groups 3, 6. Results: On $CAD-Temp^{(R)}$ significantly higher bracket bond strengths than on $Telio^{(R)}$ CAD were recorded. With XTP significantly lower levels of adhesion were reached than using SU or AP. Roughening with a coarser bur resulted in a significant increase in adhesion. Conclusions: Bracket bonding to CAD/CAM PMMA can be promoted by grinding the substrate with a normal/medium-grit bur or by coating the intact surface with universal adhesives. With appropriate pretreatments, bracket adhesion to CAD/CAM PMMA temporary restorations can be enhanced to clinically satisfactory levels.

• Korean Journal of Plant Resources
• /
• v.11 no.3
• /
• pp.290-295
• /
• 1998

Presowing treatements to seed are reasonable for elevating the seedling production efficiency. This experiment was carried out to determine the effects of $GA_3$ [0 (water) : 0.01 mM] and light qulaity (red : white) simultaneously treated before sowing on seedling emergence and growth of tobacco (Nicotiana tabacum L.) cv NC 82 and Burley 21. Red or white light was illuminated 12 hours a day while seeds of the cultivars were imbibed with either water or $GA_3$ 0.01 mM for 3 days. Seedling emergence was measured up to 20 days after sowing but morphological characters and dry weights were done 40 days. The seedling emergence rate of cv NC 82 was more affected by light quality and $GA_3$ pretreatments than that of cv Burley 21. Light quality more influenced the rate than $GA_3$ while red light or water imbibition enhanced the rates of the two cultivars compared to the other treatement. Although mean plant height and leaf number per seedling were nearly equal between the treatements, red light declined leaf area per seedling of cv Burley 21 of which seeds were imbibed in water but white light decreased the areas of both cultiars of which seeds were soaked in $GA_3$solution. Shoot dry weight was greater in cv NC 82 but less in cv Burley 21 pretreated with red light, and root dry weight showed the reverse result in white light, meaning that presowing light and $GA_3$ treatments could be changed the seedling development and growth of tobacco.

• Analytical Science and Technology
• /
• v.35 no.3
• /
• pp.129-135
• /
• 2022

We tested the pre-treatment of alumina, leucine, alumina mixed with leucine at ratios of 9:1 (Al-Leu (9:1)) and 5:1 (Al-Leu (5:1)), and alumina mixed with sodium lactate at a ratio of 5:1 (Al-Lac (5:1)) on aged fingerprints (1, 7, 14, and 30 days after natural fingerprinting) before cyanoacrylate (CA) fuming to improve the development efficacy. As a result of the experiment, fingerprints with pre-treatment of alumina, leucine, Al-Leu (9:1), Al-Leu (5:1), and Al-Lac (5:1) showed better development efficacy (area and minutiae) than fingerprints without pre-treatment. Therefore, this modified CA fuming method improved the development efficacy with five pretreatments.

• The Korean Journal of Pain
• /
• v.35 no.4
• /
• pp.433-439
• /
• 2022

Background: Repeated administration of opioid analgesics for pain treatment can produce paradoxical hyperalgesia via peripheral and/or central mechanisms. Thus, this study investigated whether spinally (centrally) administered orexin A attenuates opioid-induced hyperalgesia (OIH). Methods: [D-Ala², N-Me-Phe⁴, Gly⁵-ol]-enkephalin (DAMGO), a selective µ-opioid receptor agonist, was used to induce mechanical hypersensitivity and was administered intradermally (4 times, 1-hour intervals) on the rat hind paw dorsum. To determine whether post- or pretreatments with spinal orexin A, dynorphin A, and anti-dynorphin A were effective in OIH, the drugs were injected through an intrathecal catheter whose tip was positioned dorsally at the L3 segment of the spinal cord (5 ㎍ for all). Mechanical hypersensitivity was assessed using von Frey monofilaments. Results: Repeated intradermal injections of DAMGO resulted in mechanical hypersensitivity in rats, lasting more than 8 days. Although the first intrathecal treatment of orexin A on the 6th day after DAMGO exposure did not show any significant effect on the mechanical threshold, the second (on the 8th day) significantly attenuated the DAMGO-induced mechanical hypersensitivity, which disappeared when the type 1 orexin receptor (OX1R) was blocked. However, intrathecal administration of dynorphin or an anti-dynorphin antibody (dynorphin antagonists) had no effect on DAMGO-induced hypersensitivity. Lastly, pretreatment with orexin A, dynorphin, or anti-dynorphin did not prevent DAMGO-induced mechanical hypersensitivity. Conclusions: Spinal orexin A attenuates mechanical hyperalgesia induced by repetitive intradermal injections of DAMGO through OX1R. These data suggest that OIH can be potentially treated by activating the orexin A-OX1R pathway in the spinal dorsal horn.

• The Korean Journal of Food And Nutrition
• /
• v.36 no.1
• /
• pp.58-68
• /
• 2023

This study investigated the quality characteristics of beyolmijang prepared with corn (steamed and roasted corn) with different pretreatments and simultaneously added starter (Bacillus velezensis JH1). pH decreased, whereas total acidity showed a tendency to increase. The moisture content decreased slightly according to the fermentation period. In color, the L and b values decreased in all samples, whereas the a value showed a tendency to increase significantly. In microorganisms, sample D had more lactic acid bacteria, whereas the mold content was lower. The total polyphenol content was highest at six weeks in sample E, and other samples showed a tendency to decrease over eight weeks. Antioxidant activity increased significantly. In particular, the content in sample E was significantly higher. Reducing sugar showed a tendency to increase as the fermentation period increased. The highest content was found in sample C containing roasted corn at six weeks of fermentation. Amino nitrogen and ammonia nitrogen content increased in all samples. As a result of electronic tongue, sample E prepared with steamed corn, roasted corn, and lactic acid bacteria showed a low salty taste, sour taste, and high umami taste and was considered a good material for the development of byeolmijang.

• The Korean Journal of Food And Nutrition
• /
• v.37 no.2
• /
• pp.57-66
• /
• 2024

The objective of this study was to investigate the quality characteristics of Campbell Early grape-added traditional Korean wines (yakju) prepared with different yeasts and pretreatments. The first pretreatment (A) was prepared by crushing the grapes, the second method (B) was prepared by heating the grapes at 60~70℃ for 30 minutes, and the third method (C) was prepared by freeze-concentrating grape juice. The pH of the fermented wines ranged from 3.77 to 4.10, and the total acidity of the samples ranged from 0.32 to 0.62%. The a value (redness) ranged from -0.40 to 17.89, which was higher in Campbell Early-added samples than in the controls (grapes not added). Total polyphenol content was the highest in samples prepared by crushing or heating Campbell Early grapes with ES22, and the total flavonoid contents were the highest in samples prepared by crushing Campbell Early grapes with ES22. The anthocyanin contents were also the highest in the samples fermented by heating Campbell Early grapes. ABTS and DPPH radical scavenging activities were also the highest (84.08 and 77.56%, respectively) in samples fermented by heating Campbell Early grapes.

• The Journal of Advanced Prosthodontics
• /
• v.16 no.2
• /
• pp.105-114
• /
• 2024

PURPOSE. This study aimed to evaluate the effect of pretreatment of three different universal adhesives (Single Bond Universal [SBU], All-Bond Universal [ABU], and Prime&Bond universal [PBU]) on the bonding durability of an adhesive (Panavia F 2.0, PF) and a conventional (Duo-Link, DL) resin cements to air-abraded zirconia. MATERIALS AND METHODS. Rectangular-shaped zirconia specimens were prepared. The chemical composition and surface energy parameters of the materials were studied by Fourier transform infrared spectroscopy and contact angle measurement, respectively. To evaluate resin bonding to the zirconia, all the bonding specimens were immersed in water for 24 h and the specimens to be aged were additionally thermocycled 10000 times before the shear bond strength (SBS) test. RESULTS. The materials showed different surface energy parameters, including the degree of hydrophilicity/hydrophobicity. While the DL/CON (no pretreatment) showed the lowest SBS and a significant decrease in the value after thermocycling (P < .001), the PF/CON obtained a higher SBS value than the DL/CON (P < .001) and no decrease even after thermocycling (P = .839). When the universal adhesives were used with DL, their SBS values were higher than the CON (P < .05), but the trend was adhesive-specific. In conjunction with PF, the PF/SBU produced the highest SBS followed by the PF/ABU (P = .002), showing no significant decrease after thermocycling (P > .05). The initial SBS of the PF/PBU was similar to the PF/CON (P = .999), but the value decreased after thermocycling (P < .001). CONCLUSION. The universal adhesive pretreatment did not necessarily show a synergistic effect on the bonding performance of an adhesive resin cement, whereas the pretreatment was beneficial to bond strength and durability of a conventional resin cement.

• Journal of Radiation Protection and Research
• /
• v.41 no.1
• /
• pp.71-79
• /
• 2016

Background: It is necessary to analyze radioactivity of naturally occurring radioactive materials (NORM) in products to ensure radiological safety required by Natural Radiation Safety Management Act. The pretreatments for the existing analysis methods require high technology and time. Such destructive pretreatments including grinding and dissolution of samples make impossible to reuse products. We developed a rapid and simple procedure of radioactivity analysis for thorium series in the products containing NORM. Materials and Methods: The developed method requires non-destructive or minimized pretreatment. Radioactivity of the product without pretreatment is initially measured using gamma spectroscopy and then the measured radioactivity is adjusted by considering material composition, mass density, and geometrical shape of the product. The radioactivity adjustment can be made using scaling factors, which is derived by radiation transport Monte Carlo simulation. Necklace, bracelet, male health care product, and tile for health mat were selected as representative products for this study. The products are commonly used by the public and directly contacted with human body and thus resulting in high radiation exposure to the user. Results and Discussion: The scaling factors were derived using MCNPX code and the values ranged from 0.31 to 0.47. If radioactivity of the products is measured without pretreatment, the thorium series may be overestimated by up to 2.8 times. If scaling factors are applied, the difference in radioactivity estimates are reduced to 3-24%. Conclusion : The developed procedure in this study can be used for other products with various materials and shapes and thus ensuring radiological safety.

• Korean Journal of Food Science and Technology
• /
• v.26 no.1
• /
• pp.74-80
• /
• 1994

As a preliminary study about the reduction of the antigenicity of whey protein isolate(WPI) by treatment of chymotrypsin, trypsin, pancreatin, and protease from Aspergillus oryzae, the properties and antigenicities of whey protein hydrolysates(WPH) were investigated. When degrees of hydrolysis (DH) were measured by use of trinitrobenzensulfonic acid(TNBS), the DH of the WPH treated by pancreatin or protease from Aspergillus oryzae$(5.05{\sim}11.47)$ were much higher than those of the tryptic or chymotryptic WPH$(15.67{\sim}20.20)$. And the pretreatments of heat$(75^{\circ}C)$, 20 min and/or pepsin resulted in higher DH of WPH, generally. When the molecular distributions of the WPH were determined by high performance size exclusion chromatography(HPSEC), the ratios of polypeptides with molecular weight more than 10kDa ranged from 12% to 36%, and the average molecular weights and the average peptide lengths of the WPH were $4,252{\sim}9,132$ dalton and $38{\sim}83$ amino acids, respectively. And there was no bitter taste in all of the WPH. Results of SDS-PAGE showed that most of intact native proteins were eliminated by the enzymatic hydrolysis but there were a few bands of peptides larger than 14.2 kDa in some WPH. When antigenicity was assayed by competitive inhibition enzyme-linked immunosorbent assay(cELISA), monovalent antigenicity of WPH to rabbit anti-WPI antiserum were lowered to $10^{-1.7}-10^{-4.9}$ times and less by the enzymatic hydrolysis. And the pretreatments of heat and pepsin resulted in the lowest antigenicicy within a group of enzymatic hydrolysis, especially in case of the pancreatic hydrolysate(PDP) whose antigenicity was found almost to be removed.

• Korean Journal of Agricultural Science
• /
• v.9 no.1
• /
• pp.250-259
• /
• 1982

The Larch was known unsuitable species for the wood cement board owing to its some inhibitory substances. Therefore this research was carried out to evaluate the effect of pretreatments and chemical additives on the properties of woodflake cement board from Japanese larch (Larix leptolepis) grown in Korea. In order to improve the board qualities, the woodflakes were treated by cold water or dilute NaOH solutions(0.1, 0.5, and 2.0%), and also some chemicals($CaCl_2$, $Al_2Cl_3$ and $Na_2SiO_4$) added to the wood cement mixture. The results obtained are summarized as follow; 1. The wood cement boards from the woodflake treated with 0.1% NaOH showed remarkable higher bending strengths and internal bonding strengths than those from the flake pretreated with cold water. 2. The bending strengths showed over $60kg/cm^2$, i.e. the standard strength of JIS A-5417, with pretreatments of NaOH over 0.1% and additive of $CaCl_2$ 3.0%. The maximum strengths showed at about 0.5 of every additives. 3. Addition of $CaCl_2$ and $Al_2Cl_3$, in the case of pretreated wood with NaOH above 0.1%, had effects on increasing the internal bonding strengths of sample boards. 4. The thickness swellings became decreasing along with the increasing NaOH pretreatment concentntration. 5. The equilibrium conditions of the sample boards pretreated with NaOH over 0.1% and added with $Al_2Cl_3$ and $CaCl_2$ were maintained at 9.0~10.5% moisture contents. 6. The specific gravity of the samples showed close relationships with strength properties.