• Food Science and Biotechnology
• /
• v.16 no.6
• /
• pp.889-893
• /
• 2007

The demand of quality green banana chips is increasing in the world snacks market, therefore, the preparation of quality chips and their subsequent shelf life in packaging were evaluated in this study. Banana slices were fried in hot oil to the desired moisture content (2-3%) and oil content (40%) in chips at 3 different temperatures, and the impact of different pretreatments were compared by sensory assessment. A linear relationship between time and temperature was used to achieve the optimal processing conditions. Banana slices fried at the lower temperature of $145^{\circ}C$ took longer to reach the desired chip qualities, but gave the best results in terms of color and texture. Blanching was the most effective pre-treatment for retaining the light yellow color in finished chips. For extending the shelf life of chips, moisture proof packaging in double layer high density polyethylene was more effective than single layer low density polyethylene.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1987.07a
• /
• pp.175-190
• /
• 1987

Germination characters of the lettuce seed that received photoperiodic pretreatments of low or high temperature from the flowering to harvest. MSU-15 seed, one of the lettuce cultivars used, having high dark germination, was modified to low dark germination by the long-day treatments during the seed formation. Light-requiring MSU-16 seed was modified to the dark-germination seed by high temperature given at the seed formation period. Above results suggest that the environmental conditions given to an immature seed adhered to a mother plant bring about some modification to its native germination habit. I confirmed that the spectral quality of light could influence the phytochrome system which controlled germination characters of the progeny of lettuce seed ; plants grown in light rich in far-red energies produced light-requiring seed, but those grown in high deficient in far-red energies produced dark germination seed.

• Journal of the Korea Furniture Society
• /
• v.19 no.4
• /
• pp.294-299
• /
• 2008

Collapse is an abnormal shrinkage resulting in uneven, rough surfaces and/or warping of sawn timber. The maximum abnormal shrinkages of the oak and persimmon specimens were obtained by the quasi-equilibrium drying and were compared with the other drying methods. The effect of steaming and freezing treatments on the shrinkage of wood was also investigated. The Quasi-equilibrium drying used in this study was proved as a good tool to make the maximum abnormal shrinkage of wood. The maximum abnormal volumetric shrinkage possibly caused by collapse could be 16.3% and 14.3% for the oak and persimmon specimens, respectively. In general the steaming-treated specimens shrank less than the controls for the oak specimens, but did more for the persimmon specimens. The volumetric shrinkages of the freezing-treated specimens were more various between the drying methods than those of the control and steaming-treated specimens.

• Analytical Science and Technology
• /
• v.17 no.6
• /
• pp.527-531
• /
• 2004

Treatment with aqueous sodium hydroxide solution plays an important role to impart certain desirable properties - feel and luster on the surface of polyester fiber. In this process alkali wastewater contains disodium terephthalate, ethylene glycol (EG) and residual sodium hydroxide. In this paper we report a new method containing the pretreatments of derivatization with benzoyl chloride and solvent extraction using pentane. The calibration curve of EG determined by GC/MS-SIM shows a good linearity in the range of 0.1 to $25{\mu}g/mL$ having the standard deviation of ${\leq}8.7%$. The recovery and the detection limit of this method are 91.9-93.7% and $0.05{\mu}g/mL$ respectively.

• Journal of the Korean institute of surface engineering
• /
• v.26 no.5
• /
• pp.225-234
• /
• 1993

Titanium nitride coatings were deposited onto SUS304 stainless steel substrates pretreated by mechanical scrubbing, chemical etching at 50% HCl solution and Ar ion etching. Adhesion strength were measured by scratch tester and confirmed by SEM with EDS. Adhesion strength of Ar ion etched substrate was 10 to 15 times higher than that of mechanical scrubbed or chemical etched substrate. Ar ion etching brought about an uniform and fine spherical shaped surface, while chemical etching gave rise to a rough and irregular surface on SEM micrograph. It was suggested that higher adhesion strength might be caused by anchoring effect of Ar ion etched surface prior to TiN deposition.

• Journal of Korean Society of Water and Wastewater
• /
• v.10 no.2
• /
• pp.70-79
• /
• 1996

Ultrafiltration(UF) and powdered activated carbon(PAC) adsorption were combined to treat wastewater contaminated with refractory organic compounds. Secondary sewage effluent of RBC process was used for the investigation. It was determined from batch test results that a contact time of 2 hours and a PAC dose of 450mg/l would be used in the experiments. Backwashing was accomplished by forcing the permeates back ward with pressure of $2.5kgf/m^2$ for 90 seconds. It was shown that refractory organics removal by the PAC-UF process was more efficient than UF process without PAC pretreatments. As backwashing frequency was decreased from four times to one time in an hour, the removal efficiency was significantly increased. The addition of PAC to the UF process mitigated the fluctuation of filtrate quality which was increased in UF process without PAC treatment as transmembrane pressure was increased.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.5
• /
• pp.1-14
• /
• 2010

Bio-ethanol is a promising alternative energy source for reducing both consumption of crude oil and environmental pollution from renewable resources like lignocellulosic biomass such as wood, forest residuals, agricultural leftovers and urban wastes. Based on current technologies, the cost of ethanol production from lignocellulosic materials is relatively high, and the main challenges are the low yield and high cost of the hydrolysis process. Development of more efficient pretreatment technology (physical, chemical, physico-chemical, and biological pretreatment), integration of several microbiological conversions into fewer reactors, and increasing ethanol production capacity may decrease specific investment for ethanol producing plants. The purpose of pretreatment of lignocellulosic material is to improve the accessible surface area of cellulose for hydrolytic enzymes and enhance the conversion of cellulose to glucose and finally high yield ethanol production which is economic and environmental friendly.

• Korean Journal Plant Pathology
• /
• v.14 no.2
• /
• pp.145-149
• /
• 1998

Four nonpathogenic isolates of Fusarium oxysporum isolated from spinach showed suppressive effect on the occurrence of the Fusarium wilt of spinach caused by F. oxysporum f. sp. sprinaciae, among which NF01 controlled the disease most effectively. And NF01 was not pathogenic to tomato, cucumber, radish and spinach. This isolate was further tested for the biological control of the disease. The isolate was not inhibitory to the growth of the pathogen on potato sucrose agar medium, however the Fusarium wilt disease occurred less by drenching spore suspension of the nonpathogenic isolate. The control effect of the isolate was higher at lower inoculum level of the pathogen than at the higher inoculum level, and in the pretreatments than the simultaneous treatment of the isolate with the pathogen inoculation. The nit mutants of the isolate were easily formed on chlorate containing media, and was reisolated selectively as nit mutant from infected soil and plants. The reisolation rate of the isolate as opposed to pathogen was high at preinoculated soil and plants relative to the simultaneous inoculation of the isolate with the pathogen.

• Korean Journal of Pharmacognosy
• /
• v.23 no.2
• /
• pp.81-88
• /
• 1992

The effects of scoparone, one of coumarin derivative on the hepatic bromobenzene metabolizing enzyme system was estimated in rats. Scoparone pretreatment revealed dose-dependently the recovery of decrease in epoxide hydrolase activity due to the bromobenzene(310 mg/kg, i.p.) treatment. And also scoparone and scopoletin (each 5mg/kg, p.o.) pretreatments showed two times increase in the $V_{max}$ values compared to those of bromobenzene-treated group which were calculated from tripartite reciprocal plots. The mode of protective effect of scoparone against bromobenzene induced toxicity is considered to be due to the induction of microsomal enzyme activity by scopoletin, the intermediate metabolite of scoparone. The changes in cytochrome P-450 activity, aminopyrine N-demethylation, aniline hydroxylation and glutathione S-transferation in scoparone-treated group were not significantly different from those of the control group.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.224-234
• /
• 1999

An attempt was made to characterize the relationship between pretreatment processes, electrolysis conditions and behaviors of the plated gold layer. In order to investigate the effect of pretreatment processes on plating, rest potential measurements of various pretreated stainless steels and a.c.-impedance spectroscopy tests were carried out in the strike plating solution. Characteristics of plated gold layers and adhesions between plated gold layers and stainless steel substrates were examined by scratching tests and micro-Vickers hardness tests. The result shows that the strike plating enhanced the adhesion of interface, the cathodic electro-activation pretreatment process improving both corrosion resistance and adhesion strength. The preferred orientations of plated gold layers were examined by the X-ray diffraction technique. As the current density increases, [111] preferred orientation of plated gold layers was found to become well developed.