• Journal of the Mineralogical Society of Korea
• /
• v.27 no.3
• /
• pp.115-124
• /
• 2014

In order to leach Au and Ag from gold-silver bearing sulfide concentrate, the sulfide concentrate was ground in a ball mill for a dry pre-treatment and a wet pre-treatment process. Mineralogical studies and thiourea leaching experiments were carried out with the pre-treated sulfide concentrate. The results of the pre-treatment with the concentrate samples showed the mean particle size and iso-electrical potential was smaller in the dry pre-treatment sample than in the concentrate sample, and the contents was lower in the wet pre-treatment sample than in the dry pre-treatment sample. In XRD analysis, amorphous properties were only shown in the wet pretreatment sample. The results of the concentrate sample leaching experiments showed that the best Au, Ag leaching parameters were when the addition of thiourea was at a 1.0 g concentration, ferric sulfate was 1.0 M, sulfuric acid was 2.0 M and the leaching temperature was at $60^{\circ}C$. The Au, Ag leaching rate was always much greater and faster with the wet pre-treatment samples than with the dry pre-treatment samples. Accordingly, it is expected that more Au, Ag can be leached in an eco-friendly methodology using wet pre-treatment. The pre-treatment could be improved with an optimized grinding additive reagent and through researching grinding time in future non-cyanide processes.

• Clean Technology
• /
• v.23 no.4
• /
• pp.364-377
• /
• 2017

In this study, to improve the low surface area of domestic anthracite as raw materials of activated carbon, characteristics on chemical activation and VOCs adsorption of activated carbon according to mixing ratio of anthracite and lignite. For these, properties of raw materials, parameter characteristics of preparation processes for activated carbon, and VOCs adsorption characteristic of the prepared activated carbon are analyzed. The experimental results showed that, the domestic anthracite had disadvantages of high contents for ash and lead, arsenic, which were exceeded for the heavy metal limits, in the properties of raw materials. To improve these diadvantages, using the mixing ratio of anthracite and lignite, and the optimum conditions for pretreatment, activation, washing, and pellitization process, the activated carbon had a range of BET (Brunauer-Emmett-Teller) surface area of $1,154{\sim}1,420m^2g^{-1}$ with mesopore development and hydrophobic surface property. The carbons were satisfied with the quality standard for granular activated carbon, and had similar physicochemical properties with the commercial activated carbon. The minimum mixing condition for commercial VOCs activated carbon performance must have the caloric value of above $5,640kcal\;kg^{-1}$, and the carbon had higher adsorption capacity with order of xylene > toluene > benzene according to more higher molcular weight and hydrophobic property.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.38-38
• /
• 2017

Water stress obstructs rice growth mainly by oxidative damage in biological cells to cause a reduction of leaf photosynthesis and evapotranspiration processes. In this study, exogenous application of vanillic acid (VA) and p-hydroxybenzoic acid (PHBA) to improve drought tolerance of two Oryza sativa cultivars, Q2 and Q8 was tested. The drought evaluation based on leaf phenotypes to show that both Q2 and Q8 resulted in remarkable water-stress tolerance induced by leaf spraying pretreatment of mixed solution of $50{\mu}M\;VA+50{\mu}M\;PHBA$. The mixtures of $25{\mu}M\;VA+25{\mu}M\;PHBA$ and $50{\mu}M\;VA+50{\mu}M\;PHBA$ treated on Q2 and Q8 in water deficit condition also indicated that total phenols, total flavonoids, and DPPH radical scavenging activity were significantly greater their controls. In general, the accumulation of individual phenolic acids was increased in exogenous phenolic treatments, as compared with controls. Particularly, Q2 obtained a considerable amount of endogenous PHBA after application of $50{\mu}M\;VA$, $25{\mu}M\;VA+25{\mu}M\;PHBA$, and $50{\mu}M\;VA+50{\mu}M\;PHBA$ (0.18 mg/g DW, 0.71 mg/g DW, and 1.41 mg/g DW, respectively); and a negligible content of VA (0.003 mg/g DW) appeared uniquely in the treatment of $50{\mu}M\;VA$. Similarly, Q8 also absorbed a significant quantity of PHBA in $50{\mu}M\;PHBA$, $25{\mu}M\;VA+25{\mu}M\;PHBA$, and $50{\mu}M\;VA+50{\mu}M\;PHBA$ treatments (0.15 mg/g DW, 0.15 mg/g DW, and 0.22 mg/g DW, respectively). In addition, the spraying $50{\mu}M\;PHBA$ and $25{\mu}M\;VA+25{\mu}M\;PHBA$ on Q8 leaves induced similar amount of drought tolerance of Q2 and Q8 were improved, paralleled with the increased amounts of endogenous phenolics revealed that VA and PHBA played an important role to enhance drought tolerance in rice.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.33-33
• /
• 2017

Water stress obstructs rice growth mainly by oxidative damage in biological cells to cause a reduction of leaf photosynthesis and evapotranspiration processes. In this study, exogenous application of vanillic acid (VA) and p-hydroxybenzoic acid (PHBA) to improve drought tolerance of two Oryza sativa cultivars, Q2 and Q8 was tested. The drought evaluation based on leaf phenotypes to show that both Q2 and Q8 resulted in remarkable water-stress tolerance induced by leaf spraying pretreatment of mixed solution of $50{\mu}M\;VA+50{\mu}M\;PHBA$. The mixtures of $25{\mu}M\;VA+25{\mu}M\;PHBA$ and $50{\mu}M\;VA+50{\mu}M\;PHBA$ treated on Q2 and Q8 in water deficit condition also indicated that total phenols, total flavonoids, and DPPH radical scavenging activity were significantly greater their controls. In general, the accumulation of individual phenolic acids was increased in exogenous phenolic treatments, as compared with controls. Particularly, Q2 obtained a considerable amount of endogenous PHBA after application of $50{\mu}M\;VA$, $25{\mu}M\;VA+25{\mu}M\;PHBA$, and $50{\mu}M\;VA+50{\mu}M\;PHBA$ (0.18 mg/g DW, 0.71 mg/g DW, and 1.41 mg/g DW, respectively); and a negligible content of VA (0.003 mg/g DW) appeared uniquely in the treatment of $50{\mu}M\;VA$. Similarly, Q8 also absorbed a significant quantity of PHBA in $50{\mu}M\;PHBA$, $25{\mu}M\;VA+25{\mu}M\;PHBA$, and $50{\mu}M\;VA+50{\mu}M\;PHBA$ treatments (0.15 mg/g DW, 0.15 mg/g DW, and 0.22 mg/g DW, respectively). In addition, the spraying $50{\mu}M\;PHBA$ and $25{\mu}M\;VA+25{\mu}M\;PHBA$ on Q8 leaves induced similar amount of VA (0.04 mg/g DW). Meanwhile, there were no trace of VA and PHBA found in controls. The levels of drought tolerance of Q2 and Q8 were improved, paralleled with the increased amounts of endogenous phenolics revealed that VA and PHBA played an important role to enhance drought tolerance in rice.

• Journal of Plant Biotechnology
• /
• v.34 no.2
• /
• pp.111-118
• /
• 2007

Global warming crisis due primarily to continued green house gas emission requires impending change to renewable alternative energy than continuously depending on exhausting fossil fuels. Bioenergy including biodiesel and bioethanol are considered good alternatives because of their renewable and sustainable nature. Bioethanol is currently being produced by using sucrose from sugar beet, grain starches or lignocellulosic biomass as sources of ethanol fermentation. However, grain production requires significant amount of fossil fuel inputs during agricultural practices, which means less competitive in reducing the level of green house gas emission. By contrast, cellulosic bioethanol can use naturally-growing, not-for-food biomass as a source of ethanol fermentation. In this respect, cellulosic ethanol than grain starch ethanol is considered a more appropriate as a alternative renewable energy. However, commercialization of cellulosic ethanol depends heavily on technology development. Processes such as securing enough biomass optimized for economic processing, pretreatment technology for better access of polymer-hydrolyzing enzymes, saccharification of recalcitrant lignocellulosic materials, and simultaneous fermentation of different sugars including 6-carbon glucose as well as 5-carbon xylose or arabinose waits for greater improvement in technologies. Although it seems to be a long way to go until commercialization, it should broadly benefit farmers with novel source of income, environment with greener and reduced level of global warming, and national economy with increased energy security. Mission-oriented strategies for cellulosic ethanol development participated by government funding agency and different disciplines of sciences and technologies should certainly open up a new era of renewable energy.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.12
• /
• pp.877-882
• /
• 2013

The application of ultrafiltration (UF) and microfiltration (MF) membranes has been increased for drinking water purification. The advantages of UF/MF membrane process compared to conventional treatment processes are stable operation under varying feed water quality, smaller construction area, and automatic operation. Most membrane treatment plants are designed with polymeric membranes. Recently, some studies suggested that the process of treating surface water with ceramic membranes is competitive to the application of polymeric membranes. Higher water flux, less frequent cleaning, and much longer lifetime are the advantages of ceramic membrane comparing to polymeric membrane. Therefore, this research focused on the application of ceramic MF membrane pilot plant at the slow sand filtration plant. The ceramic membrane pilot plant has three trains that used raw water and sand filtered water as a feed water, respectively. For optimizing the pilot plant process, the coagulation with PACl coagulant was used as a pretreatment of ceramic membrane process. In addition, CEB (Chemical Enhanced Backwash) process using $H_2SO_4$ and NaOCl was used for 1.5 days, respectively. The experimental results showed that applying the optimum coagulant dose before membrane filtration showed enhancing membrane fluxes for both raw water and sand filtered water. Also, when using raw water as a feed of membrane, minimum fouling rate was 2.173 kPa/cycle with 25 mg/L of PACl and when using sand filtered water, the minimum fouling rate was 0.301 kPa/cycle with 5 mg/L of PACl.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.2
• /
• pp.91-100
• /
• 2017

The purpose of this study is to provide a design and operation technical guideline for meeting the appropriate design criteria to bio-gasification facilities treating organic wastes. In accordance with the government's mid-to long-term policies on bio-gasification and energization of organic wastes, the expansion of the waste-to-energy (WTE) facilities is being remarkably promoted. However, because of the limitation of livestock manure containing low-concentration of volatile solids, there has been increased in combined bio-gasification without installing new anaerobic digestion facilities. The characteristics and common problems of each treatment processes were investigated for on-going 13 bio-gasification facilities. The seasonal precision monitoring of chemicophysics analysis on anaerobic digestor samples was conducted to provide guidelines for design and operation according to the progress of bio-gasification treatment. Consequently, major problems were investigated such as large deviation of organic materials depending on seasons, proper dehumidification of biogas and pretreatment of hydrogen sulfide.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.2
• /
• pp.35-46
• /
• 2008

Soil moisture is one of the important components in hydrological processes and also controls the subsurface flow mechanism at a hillslope scale. In this study, time series of soil moisture were measured at a hillslope located in Gwangneung National Arboretum, Korea using a multiplex Time Domain Reflectometry(TDR) system measuring soil moisture with bi-hour interval. The Box-Jenkins transfer function and noise model was used to estimate spatial distributions of soil moisture histories between May and September, 2007. Rainfall was used as an input parameter and soil moisture at 10 cm depth was used as an output parameter in the model. The modeling process consisted of a series of procedures(e.g., data pretreatment, model identification, parameter estimation, and diagnostic checking of selected models), and the relationship between soil moisture and rainfall was assessed. The results indicated that the patterns of soil moisture at different locations and slopes along the hillslope were similar with those of rainfall during the measurment period. However, the spatial distribution of soil moisture was not associated with the slope of the monitored location. This implies that the variability of the soil moisture was determined more by rainfall than by the slope of the site. Due to the influence of vegetation activity on soil moisture flow in spring, the soil moisture prediction in spring showed higher variability and complexity than that in early autumn did. This indicates that vegetation activity is an important factor explaining the patterns of soil moisture for an upland forested hillslope.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.1
• /
• pp.55-64
• /
• 2018

The purpose of this study is to provide a design and operation technical guideline for meeting the appropriate design criteria to biogas utilization treating organic wastes. In accordance with the government's mid-to long-term policies on bio-gasification and energization of organic wastes, the expansion of the waste-to-energy (WTE) facilities is being remarkably promoted. However, because of the limitation of livestock manure containing low-concentration of volatile solids, there has been increased in combined bio-gasification without installing new anaerobic digestion facilities. The characteristics and common problems of each treatment processes were investigated for on-going 11 bio-gasification facilities. The seasonal precision monitoring of chemicophysics analysis on anaerobic digestor samples was conducted to provide guidelines for design and operation according to the progress of biogas utilization. Consequently, Major problems were investigated such as large deviation of organic materials depending on seasons, proper dehumidification of biogas, pretreatment of hydrogen sulfide, operation of power generation and steam. This study was conducted to optimize biogas utilization of type of organic waste(containing sewage sludge and food waste, animal manure), research the facilities problem through field investigation.

• Journal of Radiation Protection and Research
• /
• v.41 no.4
• /
• pp.359-367
• /
• 2016

Background: As new legislation has come into force implementing radiation safety management for the use of naturally occurring radioactive materials (NORM), it is necessary to establish a rapid and accurate measurement technique. Measurement of $^{238}U$ and $^{232}Th$ using conventional methods encounter the most significant difficulties for pretreatment (e.g., purification, speciation, and dilution/enrichment) or require time-consuming processes. Therefore, in this study, the applicability of ED-XRF as a non-destructive and rapid screening method was validated for raw materials and by-product samples. Materials and Methods: A series of experiments was conducted to test the applicability for rapid screening of XRF measurement to determine activity of $^{238}U$ and $^{232}Th$ based on certified reference materials (e.g., soil, rock, phosphorus rock, bauxite, zircon, and coal ash) and NORM samples commercially used in Korea. Statistical methods were used to compare the analytical results of ED-XRF to those of certified values of certified reference materials (CRM) and inductively coupled plasma mass spectrometry (ICP-MS). Results and Discussion: Results of the XRF measurement for $^{238}U$ and $^{232}Th$ showed under 20% relative error and standard deviation. The results of the U-test were statistically significant except for the case of U in coal fly ash samples. In addition, analytical results of $^{238}U$ and $^{232}Th$ in the raw material and by-product samples using XRF and the analytical results of those using ICP-MS ($R^2{\geq}0.95$) were consistent with each other. Thus, the analytical results rapidly derived using ED-XRF were fairly reliable. Conclusion: Based on the validation results, it can be concluded that the ED-XRF analysis may be applied to rapid screening of radioactivities ($^{238}U$ and $^{232}Th$) in NORM samples.