• 한국의류산업학회지
• /
• 제21권4호
• /
• pp.509-514
• /
• 2019

Cotton fabrics were treated with gelatin to enhance dyeability and color strength when using Caesalpinia sappan dye. Gelatin was used as the protein and a pad-dry- cure method was used for the treatment process (2, 4, 6, 8, 10, 12, 14g/l concentration). Pretreated fabrics were mordanted with 10% alum. Fabrics were then dyed with freeze-dried sappan wood water extract powder form. Dyed samples were assessed in regards to dyeing behavior and color fastness. Comparing untreated and gelatin treated samples from the SEM images indicated that the Gelatin treatment (10g/l) resulted in an enhanced surface roughness that was relative to that of untreated cotton. Padding cotton with gelatin at 6g/l concentration afforded dyed fabrics with a 2 times increase in the K/S value over that of untreated fabrics. All dyed samples were red color with a significant enhancement in the sample color strength (K/S) being observed for pretreated samples. pH values favor dye absorption with pH 7 yielding the highest color strength. Dyeing at an elevated temperature resulted in a lower color strength and reddish-dull color. Longer dyeing times created greater color strengths for untreated and gelatin treated cotton. Increased dye concentrations resulted in higher K/S values for both gelatin treated and untreated cotton. As for color fastness, gelatin treated and untreated cotton fabrics dyed with sappan wood extract showed a relatively low rating in washing fastness (color change 1 rating), light fastness (1 rating), and rubbing fastness (wet:1-2, dry:3-4 rating).

• 한국염색가공학회지
• /
• 제17권1호
• /
• pp.52-59
• /
• 2005

The purpose of this study is to establish the scientific data of cotton fabric pretreated with skim milk powder and to improve the dyeability. The surface monophology, add on, whiteness, stiffness, air permeability, moisture regain and absorption of cotton fabrics were evaluated by varying concentration of SMP to get the optimal conditions in pretreatment. FT-IR of cotton fabrics pretreated with SMP were measured. Amino acid compositions, viscosity of SMP were evaluated. The K/S values by varying concentration of cinnamon cassia and subtract of dyed SMP-C were measured. I attempted to evalute the color fastness of untreated and AI. The results are as follow; The optimal concentration of SMP was 9%(w/v) to be pretreated with cotton fabrics. From FT-IR spectrum, formation of -NH$_2$ and -COOH was verified by SMP-C. Denaturalization of protein and condensation of carbohydrate, fat, etc. were found in a measurement of amino acid and viscocity. The K/S value of cotton fabrics pretreated with SMP was higher than that of untreated. Most of the color fastnesses were great.

• 대한가정학회지
• /
• 제37권12호
• /
• pp.169-177
• /
• 1999

This study has examined weight loss rates of Iyoceu, lyocell/cotton, cotton that were treated with cellulase under different concentration, time, temperature and pH. and compared physical properties changes of tensile strength, drape, moisture absorbency, shrinkage and dyeability. The notable results are summarized as follows: Lyocell was in need of pretreatment by NaOH in the side of weight loss, tensile strength and dyeability. Weight loss rates of cellulose fabrics by cellulase treatment were in the order of cotton > lyocell/cotton > lyocell at the same conditions. In case of lyocell and lyocell/cotton, weight loss rates showed up lower than cotton, while strength retention decreased, drape and strength flexibility were highly improved after cellulase treatment.

• 패션비즈니스
• /
• 제7권6호
• /
• pp.50-56
• /
• 2003

Chitosan has been widely applied to the products in various industries such as textile fabrics, apparels, foods, medical area, etc. Cochineal has long been employed as one of natural dyestuffs in the textile industry. The effect of chitosan pre-treatment on the low-stress physical and mechanical properties of cochineal-dyed fabrics including cotton, silk, nylon and polyester fabrics was investigated in this study. The chitosan treatment and mordanting of the fabrics changed the bending, shear, compression, and surface properties of the fabrics. In cotton fabric specimens, while the increase of B(bending rigidity) of cotton is relatively high, the increase of G(shear rigidity) of cotton is relatively low. In nylon and PET fabric specimens, while the increase tendency of B is relatively low, that of G is high compared to the corresponding cotton fabrics.

• 한국의류학회지
• /
• 제13권1호
• /
• pp.89-97
• /
• 1989

Graft polymerization of MMA onto cotton fiber was carried out in two ways, two step graft polymerization and one step emulsion graft polymerization, using tetravalent cerium ion as an initiator. At two step graft polymerization, the first step was the pretreatment of cotton fiber with an aqueous initiator solution and the second was the grafting pretreated cotton fiber in the monomer solution. In case of one step emulsion graft polymerization, MMA was emulsified with SLS in initiator solution. Under the various graft polymerization conditions, graft yield, graft efficiency and from the Arrhenius plot the apparent activation energy were compared. The results of this study were as follows: 1. Graft yield and graft efficiency of emulsion graft polymerization were higher than those of two step graft polymerization. 2. In case of two step graft polymerization, graft yield was affected by the pretreatment time of cotton fiber with an aqueous initiator solution. And graft yield of emulsion graft polymerization was increased with the concentration of emulsifier below cmc of SLS and was decreased thereafter. 3. Elevation of temperature resulted increase in graft yield for both grafting methods. The apparent activation energy of emulsion graft pelymerzation was lower than that of two step graft polymerization. 4. Increased reaction time increased in graft yield, but decreased in graft efficiency. 5. Moisture regain of grafted cotton was decreased with graft yield.

• 한국염색가공학회지
• /
• 제16권6호
• /
• pp.23-29
• /
• 2004

The purpose of this study is to improve the dyeability and the color fastness to light of cotton fabric dyed with extraction of cinnamon cassia. Cotton fabric was pretreated with chito-colla to enhance the dyeability, and K/S values were compared chito-colla pretreated fabric and untreated fabric. In addition, to improve of color fastness to light of dyed fabric, it was used FFC compound as mordant. Also, it was measured SOD-liked activity of FFC compound and lifht fastness of dyed fabrics. The results are as follow; K/S value of cotton fabric pretreated with chito-colla(5%) was much more increased than untreated fabric. SOD-liked activity of FFC compound was observed over 70%. Light fastness of cotton fabric treated with FFC compound was 3～4 grades.

• 한국염색가공학회지
• /
• 제32권3호
• /
• pp.135-141
• /
• 2020

The primary and secondary alcohols in cellulose reacted with acrylonitrile(AN) in the presence of strong alkalis to form cyanoethylated cellulose. The partially cyanoethylated cotton(CEC) fabric with AN in the presence of aqueous sodium hydroxide solution was described, including effects of treatment time and reagent concentrations. The weight increases of cotton fabric were shown to be linearly related to the treatment time, temperature and concentration of sodium hydroxide. The physical properties such as shrinkage ratio and tensile strength were proportional to the weight increases without significant impact on elongation. But the moisture regain decreased with decreasing hydrophilicity. The degree of substitution(DS) and transfer ratio were linearly related to the weight increases. In the CEC with increasing weight up to 24.9%, it has been obtained with DS up to 0.63-0.67 cyanoethyl groups per anhydroglucose and transferring ratio up to 87.7%. The color fastness to washing by sublimation transfer printing was improved by the cyanoethylation.

• 복식문화연구
• /
• 제13권4호
• /
• pp.576-588
• /
• 2005

The effect of chitosan pretreatment on the dyeing of cotton fiber and silk fiber was investigated. However, it has been difficult to evaluate the effect of the chitosan precisely, since the characterization of the molecular weight and effect of the degree of deacetylation were not elucidated for the application. The treatment effect may change diversely since the chitosan solution viscosity differs a lot based on the chitosan molecular weight. In this study, three chitosan specimens, varying in molecular weight, were applied for the fabric pretreatment in order to investigate the effect of chitosan molecular weight. Also, in order to maximize the efficacy of the chitosan, highly deacetylated chitosan specimens, meeting the deacetylation degree of $100\%$, were selected far the application. The air-permeability change according to the chitosan molecular weight change, influence on the mordanting, color change, and wash fastness change were investigated.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1991년도 제1차 학술발표초록집
• /
• pp.19-19
• /
• 1991

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2010년도 제3회 국제학회
• /
• pp.176-176
• /
• 2010