• 한국항공우주학회지
• /
• 제33권6호
• /
• pp.31-38
• /
• 2005

하중해석을 위한 선형 패널법에서 압력과 다운워시와의 관계는 공력영향계수로 표현되며 점성 효과는 무시되고 천음속 영역에서 압축성 효과를 적절히 표현하지 못한다. 공력영향계수는 공력면의 평면형상에 의해 결정되므로 저 레이놀즈 수의 유동의 특성을 나타내는 데는 한계가 있다. 따라서 공력계수의 시험치를 구속조건으로 하여 압력분포를 직접 보정하거나 다운워시를 보정하여 유효 캠버나 두께를 반영하여 압력분포를 보정하게 된다. 본 논문에서는 전승보정방법과 후승보정방법을 초소형 비행체의 균형해석 및 하중해석을 위한 공기력 보정에 적용하였다. 이론적인 공기력은 패널법을 이용하였으며 단일 구속조건과 이중 구속조건을 적용하여 보정행렬과 보정된 압력계수를 구하였다. 초소형 비행체의 공력보정에 있어서 비행영역의 특성으로 인해 후승보정방법이 보다 나은 결과를 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제12권3호
• /
• pp.309-315
• /
• 1991

The thermal transport coefficients-the self-diffusion coefficient, shear viscosity, and thermal conductivity-of liquid argon at 94.4 K and 1 atm are calculated by non-equilibrium molecular dynamics (NEMD) simulations of a Lennard-Jones potential and compared with those obtained from Green-Kubo relations using equilibrium molecular dynamics (EMD) simulations and with experimental data. The time-correlation functions-the velocity, pressure, and heat flux auto-correlation functions-of liquid argon obtained from the EMD simulations show well-behaved smooth curves which are not oscillating and decaying fast around 1.5 ps. The calculated self-diffusion coefficient from our NEMD simulation is found to be approximately 40% higher than the experimental result. The Lagrange extrapolated shear viscosity is in good agreement with the experimental result and the asymptotic formula of the calculated shear viscosities seems to be an exponential form rather than the square-root form predicted by other NEMD studies of shear viscosity. The agreement for thermal conductivity between the simulation results (NEMD and EMD) and the experimental result is within statistical error. In conclusion, through our NEMD and EMD simulations, the overall agreement is quite good, which means that the Green-Kubo relations and the NEMD algorithms of thermal transport coefficients for simple liquids are valid.

• 해양환경안전학회지
• /
• 제20권3호
• /
• pp.323-333
• /
• 2014

In this paper, the wakes behind a square cylinder were simulated using two kinds of different turbulence models for the eddy viscosity concept such as the zero- and the one-equation model in which the former is the mixing length model and the latter is the k-equation model. For comparison between numerical and analytical solutions, we employed three skill assessments: the correlation coefficient(r) for the similarity of the wake shape, the error of maximum velocity difference(EMVD) for the accuracy of wake velocity and the ratio of drag coefficient(RDC) for the pressure distribution around the structure. On the basis of the numerical results, the feasibility of each model for wake simulation was discussed and a suitable value for the empirical constant was suggested in these turbulence models. The zero-equation model, known as the simplest turbulence model, overestimated the EMVD and its absolute mean error(AME) for r, EMVD and RDC was ranging from 20.3 % to 56.3 % for all test. But the AME by the one-equation model was ranging from 3.4 % to 19.9 %. The predicted values of the one-equation model substantially agreed with the analytical solutions at the empirical mixing length scale $L=0.6b_{1/2}$ with the AME of 3.4 %. Therefore it was concluded that the one-equation model was suitable for the wake simulation behind a square cylinder when the empirical constant for eddy viscosity would be properly chosen.

• 한국세라믹학회지
• /
• 제35권9호
• /
• pp.974-980
• /
• 1998

This study is concerned with the production of carbon fiber reinforced carbon(C/C) with polyaromatic mesophase pitch as matrix precursor and with the investigation of friction-wear characteristics in ambient air using a constant speed type of friction tester. The main problem in using the polyaromatic mesophase as the matrix precursor is the high viscosity which may limit the complete impregnation of the fiber preform in the vacuum. To solve these problems two dimensional carbon fiber fabrics were infiltrated with meso-phase pitch in the pitch impregnator. After the impregnation and the heat treatment process. C/C com-posites were characterized by density porosity to monitor the influence of high pressure and temperature. It showed that the bulk density was increased and the apparent porosity and the density increasing rate was reduced as repeating the impregnation the carbonization and the heat treatment. The friction-wear charac-teristics of C/C composites were investigated by measuring the average friction coefficient and the specific wear rate as functions friction speed and friction pressure using a constant speed type of friction tester. C/C composite4s showed the average friction coefficient to be reduced as increasing the friction speed and the friction pressure.

• 설비공학논문집
• /
• 제15권9호
• /
• pp.768-778
• /
• 2003

Numerical analysis has been carried out to investigate laminar convective heat transfer in a tube for supercritical water near the thermodynamic critical point. Fluid flow and heat transfer are strongly coupled due to large variations of thermodynamic and transport properties such as density, specific heat, viscosity, and thermal conductivity near the critical point. Heat transfer characteristics in the developing region of the tube show transition behavior between liquid-like and gas-like phases with a peak in heat transfer coefficient distribution near the pseudocritical point. The peak of the heat transfer coefficient depends on pressure and wall heat flux rather than inlet temperature and Reynolds number, Results of the modeling provide convective heat transfer characteristics including velocity vectors, temperature, and the properties as well as the heat transfer coefficient. The effect of proximity to the critical point is considered and a heat transfer correlation is suggested for the peak of Nusselt number in the tube.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제13권4호
• /
• pp.206-216
• /
• 2005

Numerical analysis has been carried out to investigate laminar convective heat transfer at zero gravity in a tube for supercritical water near the thermodynamic critical point. Fluid flow and heat transfer are strongly coupled due to large variation of thermodynamic and transport properties such as density, specific heat, viscosity, and thermal conductivity near the critical point. Heat transfer characteristics in the developing region of the tube show transition behavior between liquid-like and gas-like phases with a peak in heat transfer coefficient distribution near the pseudo critical point. The peak of the heat transfer coefficient depends on pressure and wall heat flux rather than inlet temperature and Reynolds number. Results of the modeling provide convective heat transfer characteristics including velocity vectors, temperature, and the properties as well as the heat transfer coefficient. The effect of proximity on the critical point is considered and a heat transfer correlation is suggested for the peak of Nusselt number in the tube.

• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.459-464
• /
• 2009

가압 삼상슬러리 기포탑에서 탑의 직경변화에 따라 기체-액체 물질전달 특성을 고찰하였다. 기체 유속, 운전압력, 액체점도, 슬러리상에서 고체입자의 양 그리고 탑의 직경이 기체-액체 부피물질전달계수에 미치는 영향을 결정하였다. 운전변수들이 물질전달계수에 미치는 영향은 기포탑의 직경이 변화함에 따라 다르게 나타났다. 기체-액체 부피물질전달계수는 기체유속이나 운전압력이 증가함에 따라 증가하였으나, 기포탑의 직경, 액체의 점도 그리고 슬러리상에 고체입자의 농도가 증가함에 따라 감소하였다. 기체-액체 물질전달계수가 기체유속 증가에 따라 증가하는 경향과 액체의 점도가 증가함에 따라 감소하는 경향은 기포탑의 직경이 증가함에 따라 점차 감소하였다. 그러나, 운전압력과 슬러리상에 포함된 고체입자의 농도가 기체-액체 물질전달계수에 미치는 영향은 기포탑의 직경이 변화함에 따라 큰 영향을 받지 않았다. 본 연구의 실험범위에서 기체-액체 물질전달계수는 다음 식과 같은 실험변수의 상관식으로 나타낼 수 있었다. $k_La=0.02D^{-0.26}U_G^{0.28}P^{0.43}{\mu}_L^{-0.04}S_c^{-0.35}$.

• 한국건축시공학회지
• /
• 제14권2호
• /
• pp.118-126
• /
• 2014

본 연구에서는 콘크리트를 펌프압송할 경우, 콘크리트의 배합조건에 따른 레올로지 특성의 차이와 압송속도에 의해 펌핑관내의 마찰저항력이 달라지게 되는 것에 착안하여 레올로지특성과 펌핑관내 마찰저항계수의 상관관계를 도출하고자 하였다. 이를 위해 콘크리트용 레올로지 측정장치와 관내마찰저항 평가시험장치를 이용하여 레올로지특성과 마찰저항력을 측정하기 위한 펌프압송실험을 수행하였다. 연구결과, 펌핑전후의 레올로지특성에 큰 변화가 있는 것으로 파악되었으며, 시험장치에 의해 측정된 관내마찰 저항력과 이론상의 관내 최대전단력이 거의 동일한 값을 나타냈다. 또한, 펌핑 후 콘크리트의 소성점도와 관내마찰저항계수의 상관관계가 매우 높은 것으로 나타났으며, 본 연구에서 도출된 마찰저항계수에 의한 압송압력의 예측값이 실측결과와 매우 높은 상관관계를 갖는 것으로 나타났다.

• 오토저널
• /
• 제12권4호
• /
• pp.56-65
• /
• 1990

Wet-friction materials have been widely used for clutches and brakes of automotives over past several decades. In order to enhance its performance, its friction behaviour should be fully understood. It is, however, still not at hand and therefore an attempt was made to have some more understanding of friction behaviour of wet-friction materials. Measurements of coefficient of friction were made with the variation of lubricants, lub. temperature, sliding velocity, and contact pressure. In addition, the effects of both the viscosity of lubricants and the porosity of materials on the coefficient of friction were also investigated. It can be concluded that the coefficient of friction is decreased as the concentrations of the resin and inorganic fillers are increased, and it tends to decrease with the increase in the lubricant temperature and sliding velocity.

• Membrane and Water Treatment
• /
• 제10권4호
• /
• pp.307-311
• /
• 2019

The ejector type microbubble generator, which is the method to supply air to water by using cavitation in the nozzle, does not require any air supplier so it is an effective and economical. Also, the distribution of the size of bubbles is diverse. Especially, the size of bubbles is smaller than the bubbles from a conventional air diffuser and bigger than the bubbles from a pressurized dissolution type microbubble generator so it could be applied to the aeration tank for wastewater treatment. However, the performance of the ejector type microbubble generator was affected by hydraulic pressure and MLSS(Mixed Liquor Suspended Solid) concentration so many factors should be considered to apply the generator to aeration tank. Therefore, this study was performed to verify effects of hydraulic pressure and MLSS concentration on oxygen transfer of the ejector type microbubble generator. In the tests, the quantity of sucked air in the nozzle, dissolved oxygen(DO) concentration, oxygen uptake rate(OUR), oxygen transfer coefficient were measured and calculated by using experimental results. In case of the MLSS, the experiments were performed in the condition of MLSS concentration of 0, 2,000, 4,000, 8,000 mg/L. The hydraulic pressure was considered up to $2.0mH_2O$. In the results of experiments, oxygen transfer coefficient was decreased with the increase of MLSS concentration and hydraulic pressure due to the increased viscosity and density of wastewater and decreased air flow rate. Also, by using statistical analysis, when the ejector type microbubble generator was used to supply air to wasterwater, the model equation of DO concentration was suggested to predict DO concentration in wastewater.