• 한국정밀공학회지
• /
• 제25권9호
• /
• pp.116-125
• /
• 2008

Inkjet printing technology with a drop-on-demand (DOD) inkget head technology has been recognized as one of versatile and low cost manufacturing tools in the electronics industry. Concerned with control of driving signal, however, general strategy to optimize jetting stability has not been understood well, because of the inherent complex multi-physics nature in inkjet phenomena. Motivated by this, present study investigates the effect of driving waveforms of piezoelectric head on jetting characteristics of DOD inkjet system focused on jetting stability with phase matching of pressure waves in the print head. The results show that velocities and volumes of the ink jetted droplets were linear relations with the driving signal's maximum voltage, while periodic behaviors are observed with the driving signal's pulse widths.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1444-1449
• /
• 2007

Inkjet printing technology with a drop-on-demand (DOD) inkjet head technology has been recognized as one of versatile and low cost manufacturing tools in the electronics industry. Concerned with control of driving signal, however, general strategy to optimize jetting stability has not been understood well, because of the inherent complex multi-physics nature in inkjet phenomena. Motivated by this, present study investigates the effect of driving waveforms of piezoelectric head on jetting characteristics of DOD inkjet system focused on jetting stability with phase matching of pressure waves in the print head. The results show that velocities and volumes of the ink jetted droplets were linear relations with the driving signal's maximum voltage, while periodic behaviors are observed with the driving signal's pulse widths.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.440-444
• /
• 2017

격벽착화기의 기폭으로 인하여 발생하는 충격파가 격벽을 통과할 때의 감쇠 특성을 해석하기 위하여 2차원 하이드로다이나믹 해석을 수행하였다. HNS와 HMX가 적층되어 있는 기폭제와 STS 격벽간의 연동해석을 통해 폭압 생성 및 압력파 감쇠 현상을 정밀하게 모사하였다. VISAR로 측정한 시험 데이터와의 정량적인 비교를 위하여 격벽 끝단에서의 자유표면 속도를 계측하였다. 해석결과, 격벽 두께에 따른 충격파의 압력 감쇠 패턴이 지수적으로 감소하는 것을 확인하였으며, 시간에 따라 측정된 입자속도에서 관찰된 변곡 패턴은 기폭부와 격벽 사이의 충전면의 급격한 파쇄(spallation)에 의한 충격파의 잇따른 전파에 의한 것임을 규명하였다.

• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.50-59
• /
• 1997

When a front head of train enters a tunnel at a high speed, compression wave is generated at tunnel entrance due to the confinement effect and propagated along the tunnel with sound of speed. The propagated compression wave is reflected at tunnel exit due to abrupt pressure change at passage. The reflected wave is expansion pressure wave. And when the rear head of train goes through the tunnel entrance, another expansion pressure wave is generated and propagated along the tunnel. The pressure drop occurs seriously around train when the two expansion pressure waves come cross on train in the tunnel. In order to reduce the pressure drop, the compression wave front must be controlled because the intensity and magnitude of pressure drop is nearly proportional to that of compression wave at tunnel entrance. This study relates to reduction of the pressure wave gradient with respect to tunnel entrance shape change with various kind of angle and rounding. The results show characteristics of wave propagation in tunnel, usefulness of characteristic curve to estimate proper time domain size in numerical study and measuring time in actual experiment. Also rounding is contributed to improve pressure wave front even if its radius is very small at tunnel entrance. In order to improve of pressure wave front at tunnel entrance, proper angle is prefered to rounding with big radius and an angle of around 14$^{\circ}$ is recommended according to this simulations, And it is expected to reduce additional pressure drop in tunnel when the location and the size of the internal space for attendant equipment are considered in advance.

• 한국철도학회논문집
• /
• 제8권6호
• /
• pp.513-519
• /
• 2005

The Korean Tilting Train eXpress may produced a strong micro-pressure wave in tunnel exit because of large train/tunnel area ration of conventional railways. This micro-pressure wave causes an impulsive noise which is a serious environmental noise pollution near tunnel exit. Tunnel hood can be the method of reducing the micro-pressure wave in tunnel exit. Therefore, parametric studies for tunnel hood are performed with respect to the hood length and size to investigate the effects of the tunnel hood. Also, axi-symmetric unsteady compressible flow solver was used to analyze train-tunnel relative motion. According to the result of numerical analysis, the maximum micro-pressure wave in tunnel exit is reduced by 56% throughout the hood establishment on conventional railways.

• 한국철도학회논문집
• /
• 제7권1호
• /
• pp.26-31
• /
• 2004

A study is conducted to clarify internal and external pressure variation of passenger cabin for KTX. These pressure variation may give rise to the ear-discomfort for passenger and fatigue for carbody. In this study, the pressure variation of interior, gangway and exterior of KTX passenger car is measured by using the atmospheric pressure sensors and portable data acquisition system. The tunnel from 4000m to 200m in length are chosen far the investigation of tunnel length effects. From the results of experiment, the pressure variation of interior per second is under the ear-discomfort limitation in all of tunnel. And, We found that there are similar patterns of exterior pressure variation for each critical tunnel length. These results generally agree to RTRI's experimental result fur Shinkansen.

• 한국해안·해양공학회논문집
• /
• 제23권5호
• /
• pp.335-344
• /
• 2011

곡면의 경계를 가지는 수로에서 비선형 파랑의 상호작용을 모의하기 위한 비정수압 자유수면 모형이 개발되었다. 제안된 모형은 비선형의 3차원 Navier-Stokes 방정식을 곡선좌표 영역에서 계산단계 분리법의 일종인 압력수정법에 의하여 수치적으로 해석된다. 특히, 연직방향으로 변형된 형태의 엇갈린 격자를 이용하여 상대적으로 간단하게 압력방정식과 자유수면 경계조건을 구성하였다. 개발된 모형의 수치해석 정확도는 2차원의 수치 파수조에서 파랑의 비선형 정도에 대하여 5차의 스토스우크스 해석해와 비교하였다. 본 모형의 실제적 적용은 원형의 수로에서 회절과 반사에 의해 변형되는 비선형 파의 변형에 초점을 맞추어 수행하였다. 두개의 파를 중첩한 고비선형의 파에 대한 경우를 제외하고 수치해석 결과는 비선형적인 영향을 고려하지 않은 해석해의 선형적인 중첩과 일치하였다. 두개의 파를 중첩한 고비선형의 파에 대한 모의를 통하여 본 모형은 원형의 수로에서 비선형 군파의 변형에관한 수치적인 모의 가능성을 제시하였다.

• 설비공학논문집
• /
• 제18권1호
• /
• pp.17-23
• /
• 2006

This study is to investigate the pressure wave characteristics and the maximum pressure rise generated by instantaneous valve closure at the end of the straightening polybutylene piping system. Experiments were conducted under the following conditions: initial pressure $1\~5$ bar, flow velocity $\~0.5-3.0m/s$ and water temperature $25^{\circ}C$. Results indicated that the peak pressure generated by quick valve closure reached Joukowsky's value. We also found that the maximum pressure rise and the pressure history depended on not only initial steady pressure but also flow velocity.

• 한국압력기기공학회 논문집
• /
• 제7권2호
• /
• pp.21-25
• /
• 2011

Although many defects in PZR heater sleeve have been reported continually from operating experiences in oversea nuclear power plant, utilities get into difficulties in finding appropriate methods for diagnostics of the components due to the limited access or high radiation problems. Recently, as an alternative, diagnostics using Guided Wave Testing(GWT) are proposed and the attention of the methods has been growing gradually because of their long range inspection capability. This study is to investigate the effectiveness of GWT to detect PWSCC in welding points of PZR heater sleeve. Moreover, mode sensitivity analysis of GWT and optimal frequency for the diagnostics of PWSCC are presented by testing the mock-ups specimens that contain artificial flaws.

• 대한기계학회논문집B
• /
• 제22권5호
• /
• pp.618-626
• /
• 1998

This paper describes a series of fundamental studies on reflection and emission of weak pressure waves from an open end of a pipe. Acoustical theories which have been employed in the plane pressure waves inside a pipe are applied to the present study. The objective of the present study is to investigate the reflection or emission coefficient of pressure wave at an open end of a pipe, the length of open end correction, and the directivity characteristics of the pressure waves emitted from the pipe. The results show that the reflection coefficient of pressure wave at an open end and the length of open end correction decrease for the wave length of pressure wave to increase. It is also found that the reflection coefficient for a baffle plate at the exit of pipe is larger than that for no baffle plate.