• Journal of Korean Academy of Nursing
• /
• v.36 no.3
• /
• pp.523-531
• /
• 2006

Purpose: The purpose of this study was to examine the effects of the ulmus root-bark dressing on tissue regeneration in experimentally-induced pressure ulcers in rats. Method: A randomized pretest/post-test control group time-series study design was used. Thirty-three male Sprague-Dawley rats were used in this study. The rats were anesthetized with 100mg/kg of ketamine. Pressure ulcers were induced at 140mmHg for three hours using a personally-designed pressing apparatus. For four weeks, the ulmus root-bark dressing was applied every other day in the experimental group (n=18) and a wet gauze dressing in the control group (n=15). For data analysis, the statistical program SPSS WIN 12 was used. The wounds were examined by light microscopy andelectron microscopy. Result: There were significant statistical differences in the size of the pressure ulcers as time went by(p=0.006). It should be noted that there were no significant statistical differences in the number of capillaries. Using light microscopy the inflammatory infiltration and neovascularization in the dermis in the experimental group emerged densely in the early stages, but recovered rapidly at the latter stages. In addition, the reepithelization of the epidermis occurred earlier than in the control group. By electron microscopy, the cell organelles of the capillary endothelial cells and the basal lamina of capillaries in the experimental group showed a more rapid maturation during the latter stages, compared with the control group. Conclusion: According to this study, it can be concluded that the ulmus root-bark dressing is effective regarding the healing of pressure ulcers.

• Nuclear Engineering and Technology
• /
• v.30 no.5
• /
• pp.403-415
• /
• 1998

The CANDU 6 reactor assembly consists of an array of 380 pressure tubes, which are installed horizontally in a large cylindrical vessel, the Calandria, containing the low pressure heavy water moderator. The pressure tube is located inside the calandria tube and the annulus between these tubes, which forms a closed loop with $CO_2$ gas recirculating, is called the Annulus Gas System(AGS). It is designed to give an alarm to the operator even for a small pressure tube leak by a very sensitive dew point meter so that he can take a preventive action for the pressure tube rupture incident. To judge whether the operator action time is enough or not in the design of Wolsong 2,3 & 4, the Leak Before Break(LBB) assessment is required for the analysis of the pressure tube failure accident. In order to provide the required data for the LBB assessment of Wolsong Units 2, 3, 4, a series of leak detection capability tests was performed by injecting controlled rates of heavy water vapour. The data of increased dew point and rates of rise were measured to determine the alarm set point for the dew point rate of rise of Wolsong Unit 2. It was found that the response of the dew point depends on the moisture injection rate, $CO_2$ gas flow rate and the leak location. The test showed that CANDU 6 AGS can detect the very small leaks less than few g/hr and dew point rate of rise alarm can be the most reliable alarm signal to warn the operator. Considering the present results, the first response time of dew point to the AGS $CO_2$ flow rate is approximated.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.6
• /
• pp.262-271
• /
• 2005

In order to achieve timely and accurate fault detection of plasma etching process, neural network based time series modeling has been applied to reactive ion etching (RIE) using two different in-situ plasma-monitoring sensors called optical emission spectroscopy (OES) and residual gas analyzer (RGA). Four different subsystems of RIE (such as RF power, chamber pressure, and two gas flows) were considered as potential sources of fault, and multiple degrees of faults were tested. OES and RGA data were simultaneously collected while the etching of benzocyclobutene (BCB) in a $SF_6/O_2$ plasma was taking place. To simulate established TSNNs as incipient fault detectors, each TSNN was trained to learn the parameters at t, t+T, ... , and t+4T. This prediction scheme could effectively compensate run-time-delay (RTD) caused by data preprocessing and computation. Satisfying results are presented in this paper, and it turned out that OES is more sensitive to RF power and RGA is to chamber pressure and gas flows. Therefore, the combination of these two sensors is recommended for better fault detection, and they show a potential to the applications of not only incipient fault detection but also incipient real-time diagnosis.

• Structural Engineering and Mechanics
• /
• v.41 no.4
• /
• pp.559-573
• /
• 2012

An adaptive modeling and simulation technique is introduced for the effective and reliable fluid-structure interaction analysis using MSC/Dytran for large-scale complex pressurized liquid containment. The proposed method is composed of a series of the global rigid sloshing analysis and the locally detailed fluid-structure analysis. The critical time at which the system exhibits the severe liquid sloshing response is sought through the former analysis, while the fluid-structure interaction in the local region of interest at the critical time is analyzed by the latter analysis. Differing from the global coarse model, the local fine model considers not only the complex geometry and flexibility of structure but the effect of internal pressure. The locally detailed FSI problem is solved in terms of multi-material volume fractions and the flow and pressure fields obtained by the global analysis at the critical time are specified as the initial conditions. An in-house program for mapping the global analysis results onto the fine-scale local FSI model is developed. The validity and effectiveness of the proposed method are verified through an illustrative numerical experiment.

• Wind and Structures
• /
• v.13 no.1
• /
• pp.37-55
• /
• 2010

In this paper South Africa is divided into strong wind climate zones, which indicate the main sources of annual maximum wind gusts. By the analysis of wind gust data of 94 weather stations, which had continuous climate time series of 10 years or longer, six sources, or strong-wind producing mechanisms, could be identified and zoned accordingly. The two primary causes of strong wind gusts are thunderstorm activity and extratropical low pressure systems, which are associated with the passage of cold fronts over the southern African subcontinent. Over the eastern and central interior of South Africa annual maximum wind gusts are usually caused by thunderstorm gust fronts during summer, while in the western and southern interior extratropical cyclones play the most dominant role. Along the coast and adjacent interior annual extreme gusts are usually caused by extratropical cyclones. Four secondary sources of strong winds are the ridging of the quasi-stationary Atlantic and Indian Ocean high pressure systems over the subcontinent, surface troughs to the west in the interior with strong ridging from the east, convergence from the interior towards isolated low pressure systems or deep coastal low pressure systems, and deep surface troughs on the West Coast.

• Wind and Structures
• /
• v.15 no.6
• /
• pp.509-529
• /
• 2012

Traditionally, a quasi steady response concerning the aerodynamic force and moment coefficients acting on a flat plate while 'flying' through the air has been assumed. Such an assumption has enabled the flight paths of windborne debris to be predicted and an indication of its potential damage to be inferred. In order to investigate this assumption in detail, a series of physical and numerical simulations relating to flat plates subject to autorotation has been undertaken. The physical experiments have been carried out using a novel pressure acquisition technique which provides a description of the pressure distribution on a square plate which was allowed to auto-rotate at different speeds by modifying the velocity of the incoming flow. The current work has for the first time, enabled characteristic pressure signals on the surface of an auto-rotating flat plate to be attributed to vortex shedding.

• Korean Journal of Health Education and Promotion
• /
• v.20 no.3
• /
• pp.207-219
• /
• 2003

This study was conducted to identify the effects of the comprehensive nursing aided self-help program for hypertensives. The program educates hypertensives in community areas about blood pressure, self-care, health promoting behaviors, and life satisfaction. For this purpose a one group time series design was used. Sixteen subjects were evaluated from S Community Health center of B city. Self-help programs developed by the author were given to the subjects. The program consisted of group education on hypertension and self-care including blood pressure self-monitoring, recording of self-care activities, and encouraging and reinforcing self-help. The whole program was carried out from October to December in 2002. Data was analyzed by repeated measure ANOVA, and post-hoc Turkey. The results were as follows： There were significant relationships between changes in systolic pressure(F＝10.638. P=.000), diastolic pressure(F＝6.783. p＝.013), self-care(F＝13.506. p＝.000), and health promoting behavior(F＝9.067. p＝.001) at the 6th week and the 9th week. There were no significant relationships between changes in life satisfaction at the 6th week or 9th week. From these results, it can be concluded that the self-help program is an effective nursing strategy to promote self-care of hypertensives in community areas.

• The Korean Journal of Rehabilitation Nursing
• /
• v.6 no.2
• /
• pp.248-256
• /
• 2003

Purpose: This research was for checking the effect of meridian massage on the reduction of pain and subjective symptoms of myofascial pain syndrome. Method: The method of the research was interruptive time series design. The research objects are 25 hospital workers with myofascial pain syndrome at B hospital in Busan from July 22, 2002 to August 18, 2002. SPSS Win 10.0 was used for data analysis, paired t-test and repeated measures ANOVA for hypothesis test. Result: The recipients of meridian massage felt less pain than before(F=12.587, p=.000). The recipients of meridian massage felt less often than before (F=6.705, p=.001). The recipients of meridian massage got lower score on subjective symptoms of myofascial pain than before(F=12.857, p=.000). The recipients of meridian massage had lower blood pressure than before(systolic blood pressure; t=4.697, p=.000, diastolic blood pressure; t=3.426, p=.002). The recipients of meridian massage did not get the lower number of pulse than before(t=0.33, p=.744). Conclusion: The above results show that meridian massage is effective on the reduction of pain and subjective symptoms of myofascial pain syndrome and makes stable the blood pressure. Therefore meridian massage can be apply as the effective intervention for the reduction of pain and subjective symptoms of myofascial pain syndrome.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.732-739
• /
• 2005

The determination of sound pressure radiated from periodic plate structures is fundamental in the estimation of noise level in aircraft fuselages or ship hull structures. As a robust approach to this problem, here a very general and comprehensive analytical model is developed for predicting the sound radiated by a vibrating plate stiffened by periodically spaced orthogonal symmetrical beams subjected to a sinusoidally time varying point load. In this these, we experiment with the numerical analysis using the space harmonic series and the SYSNOISE for measuring the vibration mode and character of response caused by sound radiation with adding the harmonic point force in the thin isotropic plate supported by the rectangular lattice reinforcement. We used the reinforcements, beams of open type section like the style of 'ㄷ' letter; the space of the beams were chosen to be 0.2m, 0.3m, 0.4m. We studied the behavior of sound pressure levels, analysis of vibration mode between support points, connection between frequency function and sound pressure levels, and connection between position function and sound pressure levels.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.1
• /
• pp.42-49
• /
• 2021

As a measure of susceptibility on the combustion instability, thermo-acoustic instabilities in rocket combustion system was considered for the estimation of the operational stability margin. Growth rate, which governs the asymptotic stability behavior of the system, was determined from the dynamic data measured during combustion tests in order to understand the dynamic characteristics of combustor system. Frequency transform technique was first applied to determine the system parameters such as growth rate and/or damping coefficient for an interested mode from the time series pressure data, and the PDFs of pressure amplitude were extracted from the amplitude envelope of pressure oscillation for the stochastic analysis.