• 약학회지
• /
• 제24권2호
• /
• pp.117-122
• /
• 1980

A new application of high pressure liquid chromatography for the determination of fenitrothion and cis- and trans-neopynamin in insecticidal preparations was investigated. Optimum conditions for a good separation and determination were determined; solvent system: dichloromethane + n-hexane = 17 + 83; Bow rate: 0.5ml/min; column: u-porasil ($4mm{\times}3Ocm$); absorbance wavelength: 254nm; 0.05 AUFS and sample size: 30 ul. Recovery of fenicrothion, cis- and trans-neopynamin from mixed artificial preparations was 99.6%, 99.7% and 99.8% respectively. Also reproducibility tests showed that the coefficient of variation was 0.89% for fenitrothion, 0.74% cis-neopynamin and 1.1% for trans-neopynamin. There was no interference with insecticidal preparation containing DDVP, allethrin, S-421 and kerosene. HPLC method was rapid, accurate and it gave better reproducibility and higher sensitivity than any other analytical method. It was considered that HPLC could be greatly applied to the analysis of fenitrothion and neopynamin in insecticidal preparations.

• 한국항공우주학회지
• /
• 제47권1호
• /
• pp.17-25
• /
• 2019

항공기의 Intake는 공간적 제약 또는 생존성 확보의 이유로 S형태의 곡률을 갖는 덕트를 가진다. 그러나 덕트의 곡률은 2차유동과 유동박리의 발생을 야기하며 불균일한 압력분포 생성의 원인이 된다. 본 연구에서는 RAE M 2129 S-Duct의 형상에 보조 Duct를 적용하여 경계층 흡입을 수행하였다. 경계층 흡입의 위치와 각도를 설계변수로 설정하였으며, 흡입면에서 동일 유량을 흡입하는 조건을 부여하였다. S-Duct의 전산해석 타당성을 검증하기 위하여 Port Side와 Starboard Side의 무차원 압력 분포를 ARA 실험값, 전산해석 값과 각각 비교하여 확인하였다. 본 연구에서는 유동 왜곡을 판단하는 공기역학적 성능인자로 유동 왜곡 계수를 사용 하였으며, 경계층 흡입에 의한 유동박리, 와류, 유량 분포 및 압력 분포를 비교 분석 하였다. 그 결과 경계층 흡입 적용 이전과 비교하여 최대 26.14%의 유동 왜곡 계수 저감 효과를 확인하였다.

• 한국식품영양과학회지
• /
• 제17권4호
• /
• pp.371-375
• /
• 1988

$32^{\circ}C$에서 분획분자량 100,000인 막을 사용하여 Cheese whey를 농축시켰을 때 그 농축한계는 38%로 이는 보통의 폐액중의 whey농도의 약 6배의 농도에 해당한다. 겔층의 형성은 농축효과를 저하시킬 뿐만 아니라 저분자용질과 고분자용질과의 분리도 나쁘게 한다. 한외여과가 고분자 용질의 분리를 대상으로 하는 이상 겔층의 형성은 피할 수 없으므로 운전시간의 합리적인 관리가 필요하다고 생각된다. 투과유속이 큰 한외여과인 경우, 경막물질이동계수는 온도 $32^{\circ}C$에서 관내선속도의 1.1승에 비례하는 결과를 얻었으며 종래의 보고치에 비하여 관내선속도의 영향이 큰 것으로 나타났다.

• Membrane and Water Treatment
• /
• 제11권2호
• /
• pp.111-121
• /
• 2020

The fouling of Nanofiltration membrane (NF) was examined using wastewater containing reactive black dye RB5 of 1500 Pt/Co color concentrations with 16890 mg/l TDS collected from El-alamia Company for Dying and Weaving in Egypt. The NF-unit was operated at constant pressure of 10 bars, temperature of 25℃, and flowrate of 420 L/min. SEM, EDX, and FTIR were used for fouling characterization. Using the ROIFA-4 program, the total inorganic fouling load was 1.07 mM/kg present as 49.3% Carbonates, 10.1% Sulfates, 37.2% Silicates, 37.2% Phosphates, and 0.93% Iron oxides. The permeate flux, recovery, salt rejection and mass transfer coefficients of the dye molecules were reduced significantly after fouling. The results clearly demonstrate that the fouling had detrimental effect on membrane performance in dye removal, as indicated by a sharp decrease in permeate flux and dye recovery 68%. The dye mass transfer coefficient was dropped dramatically by 34%, and the salt permeability increased by 14%. In this study, all the properties of the membrane used and the fouling that caused its poor condition are identified. Another study was conducted to regeneration fouled membrane again by chemical methods in another article (Abdel-Fatah et al. 2017).

• 대한기계학회논문집B
• /
• 제27권8호
• /
• pp.1051-1060
• /
• 2003

The heat and mass transfer on two kinds of tube surfaces (bare stainless steel tube and Teflon coated tube) in steam-air mixture flow are experimentally studied to obtain design data for the heat exchanger of the latent heat recovery from flue gas. In the test section, 3-tubes are horizontally installed, and steam-air mixture is vertically flowed from the top to the bottom. The pitch between tubes is 67mm, the out-diameter of tube is 25.4mm, and the thickness is 1.2mm ; blockage factor (cross sectional tube area over the cross sectional area of the test section) is about 0.38. All of sensors and measurement systems (RTD, pressure sensor, flow-meter, relative humidity sensor, etc.) are calibrated with certificated standard sensors and the uncertainty for the heat transfer measurement is surveyed to have the uncertainty within 7%. As experimental results, overall heat transfer coefficient of the Teflon (FEP) coated tube is degraded about 20% compared to bare stainless tube. The degradation of overall heat transfer coefficient of Teflon coated tube comes from the additional heat transfer resistance due to Teflon coating. Its magnitude of heat transfer resistance is comparable to the in-tube heat transfer resistance. Nusselt and Sherwood numbers on Teflon (FEP) coated surface and bare stainless steel surface are discussed in detail with the contact angles of the condensate.

• 대한기계학회논문집B
• /
• 제39권8호
• /
• pp.669-675
• /
• 2015

자동차용 터보차저 원심압축기의 재순환케이싱처리(RCT)부의 높이변화가 압축기의 성능에 미치는 영향이 조사되었다. 연구대상 RCT 부의 높이는 1.2mm, 1.5mm, 1.8mm 의 세가지이며, 회전수 범위는 90,000 - 150,000 rpm, 유량 범위는 0.015 kg/s - 0.08 kg/s 이다. 전압력비와 등엔트로피 효율 비교 결과, 본 수치계산은 실제압축기의 성능 제원과 최대오차 0.7%의 범위 내에서 잘 일치하였다. 해석결과, RCT 부 높이 1.2mm, 1.8mm, 1.5mm 순서로 균일 압력분포, 높은 압력비, 넓은 작동범위를 얻었다. 이들 세가지 경우 모두, 회전수가 증가할수록 이들의 압력비는 높아지나 운전범위는 좁아지는 전형적인 압축기 맵의 특성을 보여주었다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.61-70
• /
• 1994

This study was executed to find the applicability of press drying of tree disk by investigating the shrinkage and drying defect and to form appropriate model by comparing the actual moisture content(MC) and internal temperature in respect of drying time with calculated values based computer simulation to which was applied finite difference method. In press drying disk, heating period, constant drying rate period maintained plateau temperature at 100$^{\circ}C$ and falling drying rate period were significantly distinguished. Actual MC and internal temperature were analogous to those calculated at comparing points. Heat transfer model formed by Fourier's law using specific heat of moist wood and conduction coefficient considering fractional volume of each element of wood cell wall, bound water, free water and air showed applicability as basic data to developing heat expansion, shrinkage and drying stress during press drying. Also mass transfer model formed by Fick's diffusion law using water vapor diffusion coefficient showed applicability. Longitudinal shrinkage was developed by pressure of hot press and tangential shrinkage was restrained by hygrothermal recovery. The heart check, surface check and ring failure were occurred differently in species, but V-shaped crack didn't develop.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.456-459
• /
• 2008

The purpose of this paper is to examine the aerodynamic characteristics of three hypersonic configurations including pure liftbody configuration, pure waverider configuration and liftbody integrated with waverider configuration. Hypersonic forbodies were designed based on these configurations. For the purpose to integrate with ramjet or scramjet, all the forebodies were designed integrated with hypersonic inlet. To better understand the forebody performance, three dimensional flow field calculation of these hypersonic forebodies integrated with hypersonic inlet were conducted in the design and off design conditions. The computational results show that waverider offer an aerodynamic performance advantage in the terms of higher lift-drag ratios over the other two configurations. Liftbody offer good aerodynamic performance in subsonic region. The aerodynamic performance of the liftbody integrated with waverider configuration is not comparable to that of pure waverider in the terms of lift-drag ratios and is not comparable to that of pure liftbody in subsonic. But the liftbody integrated with waverider configuration exhibit good lateral-directional and longitudinal-directional stability characteristics. Both pure waverider and liftbody integrated with waverider configuration can provide relatively uniform flow for the inlet and offer good aerodynamic characteristics in the terms of recovery coefficient of total pressure and uniformity coefficient.

• Wind and Structures
• /
• 제11권4호
• /
• pp.257-273
• /
• 2008

A number of passive aerodynamic drag reduction methods were applied separately and then in different combinations on an intercity bus model, through wind tunnel studies on a 1:20 scale model of a Mercedes Benz Tourismo 15 RHD intercity bus. Computational fluid dynamics (CFD) modelling was also conducted in parallel to assist with flow visualisation. The commercial CFD package $CFX^{TM}$ was used. It has been found that dramatic reductions in coefficient of drag ($C_D$) of up to 70% can be achieved on the model using tapered and rounded top and side leading edges, and a truncated rear boat-tail. The curved front section allows the airflow to adhere to the bus surfaces for the full length of the vehicle, while the boat-tails reduce the size of the low pressure region at the base of the bus and more importantly, additional pressure recovery occurs and the base pressures rise, reducing drag. It is found that the CFD results show remarkable agreement with experimental results, both in the magnitude of the force coefficients as well as in their trends. An analysis shows that such a reduction in aerodynamic drag could lead to a significant 28% reduction in fuel consumption for a typical bus on intercity or interstate operation. This could translate to a massive dollar savings as well as significant emissions reductions across a fleet. On road tests are recommended.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.813-818
• /
• 2001

The flow characteristics of the vaned diffuser were complicated with geometric shapes. We have studied the effects of various vaned diffuser configurations, such as divergence angles and rectangular and conical cross-section shapes. Numerical analyses are carried out for the diffuser and casing. The pressure recovery coefficient was calculated to estimate the performance of the diffuser, and then compared with the measure data. Results show that the shapes and the divergence angles of the diffuser strongly influence on the performance of the small-size turbo-compressor.