• Journal of Magnetics
• /
• v.21 no.4
• /
• pp.586-592
• /
• 2016

The magnetic-jack type CRDM withdraws or inserts a control rod assembly from/to the reactor core to control the core reactivity. The CRDM housings form not only the path of the electromagnetic field but also the pressure boundary of a nuclear reactor, and a periodic in-service inspection should be carried out if there are welded or flange jointed parts on the pressure boundary. The in-service inspection is a time-consuming process during the reactor refueling, and moreover it is difficult to perform the inspection over the reactor head. A magnetic motor housing is applied for the current SMART CRDM and has several welding joints, however a nonmagnetic motor housing with fewer or no welding joints may improve the operational efficiency of the nuclear reactor by avoiding or simplifying the in-service inspection process. Prior to the development, the magnetic field transfer efficiency of the nonmagnetic housing was required to be assessed. It was verified and optimized by the electromagnetic analysis of the lifting force estimation. Magnetic flux rings were adopted to improve the efficiency. In this paper, the design and optimization process of a nonmagnetic motor housing with the magnetic flux rings for the SMART CRDM are introduced and the analyses results are discussed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.769-773
• /
• 2002

The die easting process was used to manufacture a motor housing for automobile. Specially automobile parts were required light and high strength. Therefore simulations have been carried out die casting process of motor housing. In this paper, we investigated about characteristics of the die casted motor housing with HPDC(High Pressure Die Casting) process. Also the MAGMAsoft was used as computer simulation code and used material was ADC12(Aluminum Die Casting Alloy). We present the results of filling behavior and solidification process of a motor housing cast. The analysis results obtained about filling behavior and solidification of cast showed good agreement with test results.

• Tribology and Lubricants
• /
• v.12 no.3
• /
• pp.63-71
• /
• 1996

The connecting rod bearing, which is subjected to periodical dynamic loading, is an impoRant component of the reciprocating engine. In the operation of this bearing, significant parameters are the oil film thickness and the film pressure. Peak film pressures of 20-30 MPa are not uncommon. So the elastic deformation of the bearing housing can have a significant effect on the bearing performance. In this study, a numerical analysis of connecting rod bearing is investigated. Elastic deformation of the bearing housing is considered in the analysis. Separate hydrodynamic and structural analysis are coupled through a direct iterative process. It is shown that as the result of the elastic deformation of the bearing housing, the eccentricity ratio is increased, and the minimum value of the minimum film thickness and the maximum value of the maximum film pressure are decreased. The variations of rotational speed and cylinder pressure affect the minimum film thickness and the maximum film pressure variations of the connecting rod bearing.

• Journal of Sensor Science and Technology
• /
• v.11 no.3
• /
• pp.138-144
• /
• 2002

The silicon piezoresistive pressure sensor is made by semiconductor process to obtain stainless steel isolated type pressure sensor. The sensor is loaded on a stainless steel housing with glass molding, $50\;{\mu}m$ stainless steel thin film is welded, and the stainless steel housing encapsulated by silicone oil. The performance of fabricated the pressure sensor has 10 bar pressure range. The XTR105 of exclusive transmitter chip is used the pressure transmitter that output current is 4 - 20 mA. The accuracy is ${\pm}5%$ FS, however, the accuracy is ${\pm}1%$ FS when the sensor is compensated temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1109-1112
• /
• 2004

This study reports on the pressure relief design and braided composite of surge arrester. Surge arresters with porcelain housing must not have explosive breakage of the housing to minimize damage to other equipment when subjected to internal high short circuit current. As a solution, this study describes pressure relief design performance of arresters with braided composite module. In general, braided composite has Potential for improved impact and delamination resistance. Manufacturing processes of the braided composite could also be automated and could potentially lead to lower costs. Therefore, in consideration of characteristics of pressure relief for polymer arrester, the fabric pattern of braided composite was decided. And Polymer arrester module was manufactured with braid. The mechanisms of pressure occurrence and relief were investigated basically by analyzing arc energy and the correlation between thermal shock and indoor pressure in pressure relief test.

• Land and Housing Review
• /
• v.2 no.4
• /
• pp.539-552
• /
• 2011

This research thesis measured potential housing development of 250 'subway station areas' around Seoul Metropolitain Region, with the use of added weighting and data of each indicator based on AHP. The analysis was conducted on the ranking of the development of 'subway station areas' on the basis of measurement results of potential housing development along with the analysis on characteristics of 'subway station areas' in daily life zone. Cluster analysis-oriented analytic measurement results suggested that 'subway station areas' in Seoul Metropolitain Region can be grouped into five clusters: Cluster 1 and Cluster 2 were populated with 'reservation areas' for outside and inside urban development, respectively scoring low all in housing development pressure and capacity. Cluster 3 was populated with 'development maintenance areas', scoring low in housing development pressure but high all in housing development capacity. Cluster 4 was populated with 'development facilitation areas', scored high all in housing development pressure and capacity. Cluster 5 was populated with 'development control areas' scoring high in housing development pressure but low in housing development capacity.

• Land and Housing Review
• /
• v.5 no.4
• /
• pp.247-257
• /
• 2014

This study proposes a new housing need and demand assessment model centering on small-scale housing development projects and happy house development projects that reflected the recent changes in rental and small sized apartment centered public housing policies and development paradigms. The housing need and demand assessment model of public housing development projects consists of quantitative evaluation factors such as potential need indicator and demand pressure indicator and qualitative evaluation factors such as local condition indicator. The potential need indicators of small sized housing development projects are calculated by subtracting the stock of already-supplied constructed rental and purchased rental housings from the potential quantity of need drawn from the small regions such as -eup, -myeon, and -dong. In the potential need indicators of happy house development projects, the potential need is calculated from those who are expected to receive a happy house in the unit of -si, -gun, and -gu. In small-sized housing development projects, demand pressure indictors are the number and the proportion of those who opened a subscription deposit, the number of those who received basic livelihood security and the number of those who were patriots and veterans. The demand pressure indicators of the happy house development projects are stock ratio of small-sized houses, rate of rise in housing rent price, level of housing rent price, and rate of monthly rent house.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.1 s.244
• /
• pp.52-59
• /
• 2006

The vibration of hydraulic piston pumps is induced by the periodically changing cylinder chamber pressure whose waveform is significantly influenced by valve plate geometry. In this study, the force input to the housing of a bent-axis type hydraulic piston pump was computed by deriving the dynamic equations of its piston and cylinder barrel. The vibration intensity of the pump was represented by the acceleration amplitude of its housing. In order to comparatively evaluate the influence of valve plate geometry on the vibration of pump housing, two different types of valve plate were tested. The computed results showed good agreement with the experimental data, indicating that the vibration acceleration of pump housing is rather dependent on the variation amplitude of balance coefficient than the changing slope or overshoot of cylinder chamber pressure. It was also confirmed that the design effect of valve plates could be directly examined out by monitoring the vibration acceleration of pump housing.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1717-1719
• /
• 1999

The chief advantage of polymer arrester. from design of pressure relief, anti-contamination, electrical failure was reduced by outdoor polymer housing. In the first for development of pressure relief design for polymer arrester, fault current and surge were studied through experiments of electrical. Designed the FRP inner tube and unit modules for pressure relief housing. Tested the performance of unit modules for pressure relief of polymer arrester, and the result was successful. The pressure relief of polymer arrester depend on design pattern of diamond shape and ellipse. Study on the pressure relief of FRP inner tube for outdoor polymer arrester. Designed and manufactured FRP inner tube of polymer arrester. Tested the fault current of polymer arrester per 10 kA, 10 cycle.

• Journal of the Korean housing association
• /
• v.9 no.3
• /
• pp.107-118
• /
• 1998

In order to provide the basic data for planning of stairways design in elderly housing, the study of Ergonomics were exmined. 3 old women and 3 female subjects were tested: 1) The relations between blood pressure and pulse: In case of the old, blood pressure was the highest at 13 cm and pulse was the highest at 23 cm. But in case of the young, the former was the highest at 23 cm and the latter was at 13 cm. 2) EMG: According to the height of stairs, the significant differences on the statistics were not seen. 3) Riviewing that biological characters according to the finishing materials, in case of the old groups, they feel most stable, as they up the wooden stairs. While they feel very dangerous, as they up the stairs where carpet is on. In the biological characters according to the stairs heights and the finishing materials, the most stable conditions for the old are 15 cm-high-stairs, wooden. And even if the stairs used inside the house, the installment of the handrails at both side must be considered.