• 제목/요약/키워드: pressure extremes

Search Result 12, Processing Time 0.025 seconds

Effects of different wind deflectors on wind loads for extra-large cooling towers

  • Ke, S.T.;Zhu, P.;Ge, Y.J.
    • Wind and Structures
    • /
    • 제28권5호
    • /
    • pp.299-313
    • /
    • 2019
  • In order to examine the effects of different wind deflectors on the wind load distribution characteristics of extra-large cooling towers, a comparative study of the distribution characteristics of wind pressures on the surface of three large cooling towers with typical wind deflectors and one tower without wind deflector was conducted using wind tunnel tests. These characteristics include aerodynamic parameters such as mean wind pressures, fluctuating wind pressures, peak factors, correlation coefficients, extreme wind pressures, drag coefficients and vorticity distribution. Then distribution regularities of different wind deflectors on global and local wind pressure of extra-large cooling towers was extracted, and finally the fitting formula of extreme wind pressure of the cooling towers with different wind deflectors was provided. The results showed that the large eddy simulation (LES) method used in this article could be used to accurately simulate wind loads of such extra-large cooling towers. The three typical wind deflectors could effectively reduce the average wind pressure of the negative pressure extreme regions in the central part of the tower, and were also effective in reducing the root of the variance of the fluctuating wind pressure in the upper-middle part of the windward side of the tower, with the curved air deflector showing particularly. All the different wind deflectors effectively reduced the wind pressure extremes of the middle and lower regions of the windward side of the tower and of the negative pressure extremes region, with the best effect occurring in the curved wind deflector. After the wind deflectors were installed the drag coefficient values of each layer of the middle and lower parts of the tower were significantly higher than that without wind deflector, but the effect on the drag coefficients of layers above the throat was weak. The peak factors for the windward side, the side and leeward side of the extra-large cooling towers with different wind deflectors were set as 3.29, 3.41 and 3.50, respectively.

근세이후 여성복식에 나타난 세기말 현상에 관한 연구 (A Study on the Characteristics of Women's Costumes in the Ends of Centuries)

  • 배수정
    • 한국가정과학회지
    • /
    • 제2권1호
    • /
    • pp.114-128
    • /
    • 1999
  • In a turn a century, the skepticism, mysticism and eroticism used to prevail, the people becoming anxious, expectative and doubtful about an oncoming age. The costumes tend to become more exciting and erotic in the fashion. This thesis is on understanding “What would 21 century's clothes be\ulcorner” after analyzing the specific points in an end of the century. The characteristics found from 16th century to 20th century are going to the extremes in the shapes, consistent appearance of bustle style costumes and excessive ornaments which are closely interrelated with one another. I expect the fashion in 21st century would be changed in two ways. Firstly, going to the extremes and stressing on the buttock would be going down in the end of 1999. Secondly, the comfortable clothes highest in function and technology, and also friendly to the environment, might be the main stream, rather then outwardly good looking clothes, because spirit and environment is much more emphasized than the mode by the social impact or pressure in the next era. (Korean J Human Ecology 2(1) : 114~128, 1999)

  • PDF

우리나라 주요측후소의 연최극 일강수량 기온 및 기압의 빈도분포 (Frequency Distribution of Annual Maximum Daily Rainfall, Temperature and Pressure at Major Meteorological Stations in South Korea)

  • 최병호
    • 물과 미래
    • /
    • 제17권2호
    • /
    • pp.99-106
    • /
    • 1984
  • 우리나라의 12개 주요측후소-서울, 인천, 전주, 광주, 목포, 제주, 여수, 대구, 부산, 포항, 마산, 울릉도의 이용가능한 년최극 일강수량, 기온 및 기압관측치로부터 최극치의 빈도분포를 추정하였다. 첫 단계로 Jenkinson방법에 의한 극치확률을 추정하는 방법이 이용되었다. 추정결과는 재현년수에 대한 각 측후소의 일강수량, 기온 및 기압을 제시하는 그래프형태로서 제시되었으며 빈도분포형태가 토의되었다.

  • PDF

A Model to Identify Expeditiously During Storm to Enable Effective Responses to Flood Threat

  • Husain, Mohammad;Ali, Arshad
    • International Journal of Computer Science & Network Security
    • /
    • 제21권5호
    • /
    • pp.23-30
    • /
    • 2021
  • In recent years, hazardous flash flooding has caused deaths and damage to infrastructure in Saudi Arabia. In this paper, our aim is to assess patterns and trends in climate means and extremes affecting flash flood hazards and water resources in Saudi Arabia for the purpose to improve risk assessment for forecast capacity. We would like to examine temperature, precipitation climatology and trend magnitudes at surface stations in Saudi Arabia. Based on the assessment climate patterns maps and trends are accurately used to identify synoptic situations and tele-connections associated with flash flood risk. We also study local and regional changes in hydro-meteorological extremes over recent decades through new applications of statistical methods to weather station data and remote sensing based precipitation products; and develop remote sensing based high-resolution precipitation products that can aid to develop flash flood guidance system for the flood-prone areas. A dataset of extreme events has been developed using the multi-decadal station data, the statistical analysis has been performed to identify tele-connection indices, pressure and sea surface temperature patterns most predictive to heavy rainfall. It has been combined with time trends in extreme value occurrence to improve the potential for predicting and rapidly detecting storms. A methodology and algorithms has been developed for providing a well-calibrated precipitation product that can be used in the early warning systems for elevated risk of floods.

전산모사에 의한 공압구동장치의 비선형 해석 (Nonlinear analysis of a pneumatic actuation system by digital simulation)

  • 조택동;신효필;문의준
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
    • /
    • pp.1104-1109
    • /
    • 1991
  • Recently, Pneumatic Actuation System (PAS) has been used increasingly as a high performance fin-control servo actuation systems because of the special advantages of pneumatic units: primarily their low cost, small size, light weight, and tolerance to broad temperature extremes. In this study, a nonlinear model of PAS is derived through the detailed analysis of the major components in the typical system. The model includes nonlinear flow-pressure relationships of the flow through the solenoid valve openings and orifices, PWM algorithm for driving two solenoid valves as a closed-center 3-way valve for minimum gas consumption, solenoid valve dynamics, saturation, and friction. Simulation results are compared with the experimental ones for square and sinusoidal inputs to see the validity of the model. Independent of the shape and magnitude of the input signals, both results are in good agreements with minor difference.

  • PDF

P.C.를 이용한 물과 증기 열물성치의 전산수식화에 관한 연구 (A Study on the Computerized Formulation of the Thermodynamic Properties of Water and Steam by Personal Computer)

  • 김경석;김원영;김경근;김용모
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제16권4호
    • /
    • pp.88-101
    • /
    • 1992
  • Properties of water and steam are very important for the steam ejector CAD program as a subroutine and design of the Shell & Tube type steam condenser. Present formular programs are based on the Skeleton Table of ASME, and are able to calculate the thermodynamoc properties of water and steam throughout the whole of the region that extend in pressure from 0 to 1000 bar and temperature from 0.01 to 80$0^{\circ}C$. When comparing calculated values for specific volume, enthalpy and entropy with the Skeleton Table 1967 and IAPS Skeleton Table 1984, values fell well within tolerances specified except near the extremes of the range of interest at the critical point and triple point, where deviations were slightly larger.

  • PDF

겨울철 북서 태평양에서 발생하는 고위도 블로킹과 중앙 태평양 기압능이 한반도 한파에 미치는 영향 연구 (A Study of the Blocking and Ridge over the Western North Pacific in Winter and its Impact on Cold Surge on the Korean Peninsula)

  • 조건희;이은희;김백민
    • 대기
    • /
    • 제33권1호
    • /
    • pp.49-59
    • /
    • 2023
  • Blocking refers to a class of weather phenomena appearing in the mid and high latitudes, whose characteristics are blocked airflow of persistence. Frequently found over the Pacific and Atlantic regions of the Northern Hemisphere, blocking affects severe weather in the surrounding areas with different mechanisms depending on the type of blocking patterns. Along with lots of studies about persistent weather extremes focusing on the specific types of blocking, a new categorization using Rossby wave breaking has emerged. This study aims to apply this concept to the classification of blockings over the Pacific and examine how different wave breakings specify the associated cold weather in the Korean peninsula. At the same time, we investigate a strongly developing ridge around the Pacific by designing a new detection algorithm, where a reversal method is modified to distinguish ridge-type blocking patterns. As result, Kamchatka blocking (KB) and strong ridge over the Central Pacific are observed the most frequently during 20 years (2001~2020) of the studied period, and anomalous low pressures with cold air over the Korean Peninsula are accompanied by blocking events. When it considers the Rossby wave breaking, cyclonic wave-breaking is dominant in KB, which generates low-pressure anomalies over the Korean Peninsula. However, KB with anticyclone wave breaking appears with the high-pressure anomalies over the Korean Peninsula and it generates the warm temperature anomaly. Lastly, the low-pressure anomalies are also generated by the strong ridge over the Central Pacific, which persists for approximately three days and give a significant impact on cold surge on the Korean Peninsula.

개발도상국들의 인구정책에 관한 비교연구 -출산조절정책을 중심으로- (A Comparative Study on Population Policies in Developing Countries)

  • 안계춘
    • 한국인구학
    • /
    • 제9권1호
    • /
    • pp.54-68
    • /
    • 1986
  • This study was designed to make a comparative analysis of fertility control policies in developing countries selected from Asia and Latin America. Considering the size and the density of population, the history of the fertility control policy, and the availability of references, eight countries were chosen among Asian developing countries that have adopted the fertility control as an official policy. All of nine countries in Latin America that have adopted family planning as an official policy were included in this study. An attempt was made to formulate an analytical framework to be used for a comparative analysis of fertility control policies. It can be represented by a continuum which consists of individual approaches and structural approaches to fertility control at both extremes. It represents fairly well the controversies between those who advocate family planning and those who advocate measures beyond family planning, but assumes that the two sides of the controversy form a continuum of approaches to fertility control. Various fertility control policies of each country were placed along this continuum and analyzed. The results of the analysis can be summarized as follows: (a) Those countries that have higher population pressure in terms of either the size of population or the population density tend to adopt fertility control policies earlier in time. (b) Those countries that have higher population pressure in terms of either the size of population or the population density tend to adopt more comprehensive measures along the continuum of fertility control policies. (c) Those countries that adopted more comprehensive measures along the continuum seem to have succeeded in reducing their level of fertility more effectively. (d) Developing countries in Asia tend to adopt more comprehensive measures to control fertility than those in Latin American countries. (e) The reduction of fertility in developing countries seems to be associated with both the fertility control policies and the level of socioeconomic development.

  • PDF

고압환경에서의 결정 크기에 원시료의 상이 미치는 영향: 비정질 시료와 나노파우더를 이용한 시료의 결정 크기 비교 (The Effect of Phases of Starting Materials on the Grain Size at High Pressure: the Comparison of Grain Size in the Samples Using Glass and Nano Powder as Starting Materials)

  • 김은정;알레시오 잔도나;타케히코 히라가;사나에 고이즈미;노부요시 미야지마;토모오 카추라;소병달
    • 광물과 암석
    • /
    • 제36권3호
    • /
    • pp.213-220
    • /
    • 2023
  • 본 연구에서는 고압 환경에서 합성된 결정 입자의 크기에 원시료(starting materials)의 상(phase)이 미치는 영향을 확인했다. 상이 다른 두 가지 원시료인 비정질 시료와 나노파우더 시료를 이용해 알루미늄이 부화된 고압의 환원환경에서 삼원계 시스템인 브리지마나이트-페리클레이스-칼슘 페라이트(calcium ferrite)상의 MgAl2O4을 합성했다. 시료는 40 GPa 2000 K의 압력온도 조건에서 20 시간 동안 가열하여 합성했다. 합성된 시료는 비정질 시료를 이용한 경우 입자 크기가 50-200 nm였으며, 나노파우더를 이용한 경우 ~500 nm로 나타났다. 이러한 차이는 1) 시료가 합성된 2000 K의 온도가 낮아 비정질 시료의 경우 결정 성장보다 결정핵 성장이 더 우세하게 나타났거나 2) 시료에 존재할 수 있는 산화 환원반응 상태의 차이로 생각된다. 추후 다원계 시스템에 대한 고압 실험을 수행할 때 비정질 시료보다 나노파우더를 원시료로 이용하는 것이 결정 성장에서 더 유리할 것으로 생각된다.

작은 탄성 변형률 하의 고정-자유 지지된 스트립과 보의 변형 (Deformations of Cantilever Strips and Beam with Small Elastic Strains)

  • 호광수;박기철;임세영
    • 대한기계학회논문집
    • /
    • 제13권4호
    • /
    • pp.572-582
    • /
    • 1989
  • 본 논문에서는 윗면에 균일한 압력을 받는 외팔보의 굽힘 변형과 고정 자유 지지된 무한길이 스트립의 폭 방향 굽힘변형을 위에 언급된 이론을 적용하여 살펴보고자 한다. 먼저 기본 지배방정식들을 요약하여 변형률의 1차항까지 나타내며 각 경우에 대해 변형을 중심선에 상대적인 단면의 변위와 단면의 회전 그리고 병진을 나타내며 각 경우에 대해 변형을 중심선에 상대적인 단면의 변위와 단면의 회전 그리고 병진을 나타내는 도심의 변위로 분해하고 도심에 상대적인 변위는 Michell에 의한 평판의 해와 St. Venant에 의한 봉의 해를 이용한다. 가정된 변위장으로부터 응력을 구한 다음 적절한 조건 하에서 국부평형방정식을 구하여 전체평형방정식을 유도한다. 또한 이로부터 각 단면의 회전과 중심선의 변위가 구해질 수 있음을 보인다.