• Title/Summary/Keyword: pressure effects

Search Result 7,977, Processing Time 0.033 seconds

Steam Pressure Effects on the Oxidation of Low-Sn Zircaloy-4 at High Temperatures (고압 수증기에 따른 Low-Sn Zircaloy-4의 고온 산화 거동)

  • Yang, Sung-Woo;Park, Kwang-Heon
    • Journal of the Korean institute of surface engineering
    • /
    • v.40 no.4
    • /
    • pp.180-184
    • /
    • 2007
  • A new zirconium alloy, low-Sn Zircaloy-4 was investigated to see the effects of high pressure steam on the oxidation at high temperatures. High pressure steam turned out to enhance the oxidation at high temperatures below $1000^{\circ}C$. The oxide layer groved to deviate from the uniform layer under high steam pressures, and usually cracks were found at the thicker parts in the oxide layer. High pressure steam seems to destabilize the tetragonal oxides near the metal layer, and the monoclinic oxides transformed from the destabilized tetragonal oxides are structurally not sound, resulting in enhanced oxidation under high pressure steam.

SPUTTERING PRESSURE EFFECTS ON MAGNETIC ANISOTROPY IN Co/Pt MULTILAYERS

  • Kim, Jin-Hong;Shin, Sung-Chul
    • Journal of the Korean Magnetics Society
    • /
    • v.5 no.5
    • /
    • pp.461-464
    • /
    • 1995
  • We have investigated the effects of sputtering Ar gas pressure on magnetic anisotropy of Co/Pt multilayers, where sputtering Ar gas pressure was varied from 2 to 20 mTorr. The surface and volume anisotropies were found to be strongly dependent on sputtering Ar gas pressure. In particular, the surface anisotropy exhibited more than fourfold enhancement as Ar pressure was decreased from 20 to 5 mTorr. We have found that the surface anisotropy was closely correlated with the low-angle x-ray diffraction intensity. We believe that these results are mainly ascribed to the variation of microstructure in the Co/Pt multilayer thin films with sputtering Ar gas pressure.

  • PDF

Short-term Effects of Lumbar Rotation Mobilization on the Single-Leg Standing Balance Ability in Healthy People: A Pilot Study

  • Kim, Bo Kyung;Choi, Wan Suk;Heo, Seo Yoon
    • Journal of International Academy of Physical Therapy Research
    • /
    • v.9 no.4
    • /
    • pp.1676-1682
    • /
    • 2018
  • The purpose of this study was to investigate the short-term effects of lumbar rotational mobilization under the single-leg standing (SLS) position. Fifteen healthy individuals were recruited, and randomized to agroup of trunk rotational exercise (TRE) and lumbar rotational mobilization (LRM). Trunk twist rotational exercise was performed to the TRE group, and mobilization was applied to the LRM group on the lumbar spine. Velocity of the center of pressure (VCOP) and center of pressure (COP) for each participant were measured through SLS. COPs were not significantly increased or decreased after treatment in both groups. VCOPs also did not change considerably except on the right side when the eye was closed. There was no significant difference between COPs and VCOPs in two groups. This study suggests that trunk rotation exercise and lumbar rotation mobilization would have similar effects on balance ability.

Effects of Pyengpaetang Extracts on the Acute Pulmonary Edema induced by Oleic acid in dogs (평폐탕(平肺湯)이 Oleic acid로 유발(誘發)된 가견(家犬)의 급성폐수종(急性肺水腫)에 미치는 영향(影響))

  • Chung, Jae-Woo;Han, Sang-Whan;Choe, Sun-Ho
    • The Journal of Internal Korean Medicine
    • /
    • v.11 no.2
    • /
    • pp.1-15
    • /
    • 1990
  • Certain oriental medication have been shown to be effective in decreasing pulmonary vascular resistance and increasing cardiac output in primary pulmonary artery pressure secondary to pulmonary edema. So oleic acid was administered in 14 dogs in order to induce acute lung injury. And we studied the hemodynamics and blood gas changes of Pyengpaetang(50mg, 100mg) with continuous postive pressure was ventilation in pulmonary edema. The pulmonary edema group, arterial oxygenation was improved after 5 and $10cmH_2O$ PEEP(positive end expiratory pressure), but cardiovascular system was depressed. Blood pressure and cardiac output were decreased, and CVP, MP AP, PCWP were increased. In Pyengpaetang(50mg) group, mean aortic pressure was decreased and PCWP(pulmonary capillary wedge pressure) was decreased remarkably, while there was a significant increase in cardiac output. And there was improvement in $PaO_2$ and $PaCO_2$ without hemodynamic changes after applying 5cm $H_2O$ PEEP, but arterial blood gases$(PaO_2,\;PaCO_2)$ were improved, while cardiovascular effects were depressed after cm $H_2O$ PEEP. In Pyengpaetang(100mg) treated group, there was no significant hemodynamic change. But mean pulmonary arterial pressure was significantly increased, and cardiac output was decreased significantly after applying the more degree of PEEP. And blood gases were not changed significantly after applying the more degree of PEEP. The above results suggest that the effects of Pyengpaetang(50mg) group is superior to those of Pyengpaetang(100mg) group on the effects of hemodynamics and gas exchanges in acute lung injury in dogs. So we can conclude that lower degree PEEP 5cm $H_2O$ is more beneficial in Pyengpaetang(50mg) treated group.

  • PDF

Effects of Chamfered Perforated Plate on Pressure Loss Characteristics (챔퍼가 적용된 타공판의 압력 강하 특성에 대한 연구)

  • You, Kyeongsik;Lee, Hyungyu;Cho, Jinsoo
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.47 no.11
    • /
    • pp.779-786
    • /
    • 2019
  • Effects of chamfered perforated plate on pressure loss characteristics were studied with CFD analysis. Both inlet chamfer angle and outlet chamfer angle were considered. Perforated patterns were compared by pressure loss coefficient in certain porosity and Reynolds number. Reynolds number effects were studied for several chamfer angles and plate thickness. As the inlet chamfer angle was increased, the pressure loss coefficient was decreased until the certain angle and reversed to increase. In the outlet chamfered shape cases, the pressure loss coefficient was increased with chamfer angle. Effects of pattern shapes and Reynolds number on pressure loss characteristics were negligible with different chamfer angles and thickness studied in this paper.

Turbulence effects on surface pressures of rectangular cylinders

  • Li, Q.S.;Melbourne, W.H.
    • Wind and Structures
    • /
    • v.2 no.4
    • /
    • pp.253-266
    • /
    • 1999
  • This paper presents the effects of free-stream turbulence on streamwise surface pressure fluctuations on two-dimensional rectangular cylinders. Particular attention is given to possible effects of turbulence integral scale on fluctuation and peak pressures. The mean, standard deviation, peak pressure coefficients, spectra and cross-correlation of fluctuating pressures were measured to investigate the nature of the separation and reattachment phenomenon in turbulent flows over a wide range of turbulence intensity and integral scale.

An Analysis of Performance of Floating-Ring Journal Bearing Including Thermal Effects (유막의 온도변화를 고려한 플로팅 링 저어널베어링의 성능해석)

  • 김종수;최상규;유광택
    • Tribology and Lubricants
    • /
    • v.17 no.2
    • /
    • pp.130-137
    • /
    • 2001
  • In this paper, the thermal effects on the performance of floating ring journal bearing are investigated theoretically. The numerical analyses include pressure drop at inner film due to a centrifugal force, fluid momentum effects of supply oil into inner film and thermal effects in lubricating films. All performance data are presented as the rotating speed of journal from 10,000 rpm to 70,000 rpm.

New techniques for estimating the shut-in pressure in hydro-fracturing pressure-time curves

  • Choi Sung O.
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 2003.11a
    • /
    • pp.272-280
    • /
    • 2003
  • A definite shut-in pressure in hydraulic fracturing techniques is needed for obtaining the correct information on the in-situ stress regimes in rock masses. The relation between the behaviour of hydraulically induced fractures and the condition of remote stress is considered to be major reasons of an ambiguous shut-in pressure in hydraulic fracturing pressure-time history curves. This paper describes the results of a series of numerical analyses carried out using UDEC(Universal Distinct Element Code, Itasca), which is based on the discrete element method, to compare several methods for determining the shut-in pressure during hydraulic fracturing. The fully coupling of hydraulic and mechanical analysis was applied, and the effects of four different discontinuity geometries in numerical modelling have been investigated for this purpose. The effects of different remote stress regimes and different physical properties on hydraulic fracture propagation have been also analyzed. Several methods for obtaining shut-in pressure from the ambiguous shut-in curves have been applied to all the numerical models. The graphical intersection methods, such as (P vs. t) method, (P vs. log(t)) method, (log(P) vs. log(t)) method, give smaller values of the shut-in pressure than the statistical method, (dP/dt vs. P). Care should be taken in selecting a method for shut-in pressure, because there can be existed a stress anomaly around the wellbore and fracturing from the wellbore by a constant flow rate may have a more complicate mechanism.

  • PDF

Modelization and Optimization of Quality Characteristics of Pork Treated Various Hydrostatic Pressure Conditions

  • Hong, Geun-Pyo;Chun, Ji-Yeon;Lee, Si-Kyung;Choi, Mi-Jung
    • Food Science of Animal Resources
    • /
    • v.32 no.3
    • /
    • pp.274-284
    • /
    • 2012
  • In this study, the effects of physical parameters (30-270 MPa of pressure, 3-57 min of time, and 1-$49^{\circ}C$ of temperature) on pork quality were investigated. Response surface methodology was used in order to monitor and model the changes in pork quality under varied pressure conditions. As quality characteristics, shear force, water holding capacity (WHC) and the CIE color of pork were measured, and optimum pressure conditions were evaluated by statistical modeling. Pressure improved the WHC of pork at relatively low temperature ($<25^{\circ}C$); however, the opposite occurred with increasing temperature. Although pressure and temperature affected the tenderness of the meat, interaction effects among variations were not observed. At pressure levels higher than 200 MPa, the color of pork differed markedly from that of the untreated controls. In particular, differential scanning calorimetry (DSC) revealed marked evidence of myosin denaturation. The present study demonstrates that pork quality varies depending on pressure conditions.

Static and seismic active lateral earth pressure coefficients for c-ϕ soils

  • Keshavarz, Amin;Pooresmaeil, Zahra
    • Geomechanics and Engineering
    • /
    • v.10 no.5
    • /
    • pp.657-676
    • /
    • 2016
  • In this paper, the active lateral earth pressure is evaluated using the stress characteristics or slip line method. The lateral earth pressure is expressed as the lateral earth pressure coefficients due to the surcharge, the unit weight and cohesion of the backfill soil. Seismic horizontal and vertical pseudo-static coefficients are used to consider the seismic effects. The equilibrium equations along the characteristics lines are solved by the finite difference method. The slope of the ground surface, the wall angle and the adhesion and friction angle of the soil-wall interface are also considered in the analysis. A computer code is provided for the analysis. The code is capable of solving the characteristics network, determining active lateral earth pressure distribution and calculating active lateral earth pressure coefficients. Closed-form solutions are provided for the lateral earth pressure coefficients due to the surcharge and cohesion. The results of this study have a good agreement with other reported results. The effects of the geometry of the retaining wall, the soil and soil-wall interface parameters are evaluated. Non-dimensional graphs are presented for the active lateral earth pressure coefficients.