• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.331-343
• /
• 2017

In this study to improve stability, workability and economics of the H-Pile+Earth plate or H-Pile+Earth plate+Cutoff grouting currently in use, we had developed HCS method belonging to the retaining wall which is consisting of a combination H-Pile, Plastic Sheet Pile and Steel Square Pipe for gap maintenance and reinforcement of flexible plastic Sheet Pile, and the behavior of each member composing HCS method is investigated by three-dimensional finite element analysis. To numerically analyze the behavior of the HCS method, we have performed extensive three-dimentional finite element analysis for three kinds of plastic Sheet Pile size, two kinds of H-Pile size and three kinds of H-Pile installation interval, one kinds of Steel Square Pipe and three kinds of Steel Square Pipe installation interval. After analyzing the numerical results, we found that the combinations of $P.S.P-460{\times}131.5{\times}7t$ (PS7) and H-Pile $250{\times}250{\times}9{\times}14$ (H250), $P.S.P473{\times}133.5{\times}9t$ (PS9) and H-Pile $300{\times}200{\times}9{\times}14$ (H300) is the most economical because these combinations are considered to have a stress ratio (=applied stress/allowable stress) close to that as the stiffness of H-Pile, plastic Sheet Pile and Steel Square Pipe composite increased, the horizontal displacement of the retaining wall and the vertical displacement of the upper ground decreased. Especially, due to the arching effects caused by the difference in stiffness between H-Pile and plastic Sheet Pile, a large part of the earth pressure acting on plastic Sheet Pile caused a stress transfer to H-Pile, and the stress and displacement of plastic Sheet Pile were small. Through this study, we can confirm the behavior of each member constituting the HCS method, and based on the confirmed results of this study, it can be used to apply HCS method in reasonable, stable and economical way in the future.

• Journal of Distribution Science
• /
• v.10 no.3
• /
• pp.43-50
• /
• 2012

This study sets out to examine how a brand image that matches the advertising model has a positive impact on brand attitude and price fairness perceptions. We reviewed the constructs on the basis of previous studies and each of the concepts has been redefined. One such concept, "image congruence," refers to the harmony, fitness, and matching quality of images. For example, how well celebrity advertising model is matches the brand image shows image congruence. Results are summarized as follows: First, the congruence of brand image and sports advertising model has no significant impact on brand attitude certainty and persistence. Second, the individual's brand attitude certainty and brand attitude persistence has a positive impact on the perceptions of price fairness. Third, the congruence of brand image and sports advertising model has a positive impact on the perceptions of price fairness. The first and the third results suggest that the positive impact on the price fairness perceptions is temporary but it has insignificant effects on the formation of brand attitude causing ongoing purchases. In other words, in order to influence consumers' long-term confidence on the brand, improving the quality of products or services has to precede promotional strategies such as advertising. When an advertising model is inappropriate for the brand image, consumers perceive product price changes as a negative issue in the short term. However, in the long term, attitude formation such as consumers' repurchase intentions and word of mouth will be not affected. The second result suggests that an already existing positive brand attitude can contribute more positively to change the perceptions of price fairness. In particular, attitude persistence has greater influence than attitude certainty on the price fairness. It suggests that persistence issues such as the trading period and the frequency of transactions must be managed and controlled because they are more important than the certainty issues such as strength of belief or trust. For example, when a commercial model for expensive sporting goods matches up with the brand image, consumer feels less pressure on the price changes. However, it does not determine the consumer's repeated purchases or sustainable transactions and it also has no absolute impact on the brand trust. In other words, consumer brand attitude should be recognized and approached as a routine strategy in view of the result that it is of great value as a causal variable in the process of consumer decision-making.

• The Korean Journal of Pharmacology
• /
• v.28 no.2
• /
• pp.171-179
• /
• 1992

Effects of a $M_1$ receptor antagonist, pirenzepine, a $M_2$ receptor antagonist, AF-DX116, and a nicotinic receptor antagonist, mecamylamine on the pressor responses to preganglionic sympathetic nerve stimulation (PNS) and McN-A-343 and DMPP in spinal (pithed) rabbits were investigated, in order to elucidate a functional role of $M_1$, $M_2$ and nicotinic receptors in ganglionic transmission. Pirenzepine and AF-DX116 selectively inhibited the McN-A-343-induced pressor response in chlorisondamine-treated rabbit and the BCh-induced bradycardia, respectively. Electrical stimulations of preganglionic sympathetic outflow at T8 level produced increases in blood pressure. Pirenzepine $(3\;{\mu}g/kg)$ significantly inhibited the PNS-induced pressor response and the degree of inhibition was not changed by increasing the doses to $100\;{\mu}g/kg$. AF-DX116 $(100\;{\mu}g/kg)$ had no effect on the PNS-induced pressor response. Mecamylamine inhibited the PNS-induced pressor response in a dose-dependent manner. The inhibitory action of mecamylamine was significantly augmented by combined-treatment with pirenzepine $(30\;{\mu}g/kg)$ but AF-DX116 $(100\;{\mu}g/kg)$ did not affect the inhibitory action of mecamylamine. McN-A-343 and DMPP elicited pressor response in the spinal rabbit. Pirenzepine and AF-DX116 dose-dependently inhibited the McN-A-343-induced pressor response but they did not affect DMPP-induced pressor response. Mecamylamine inhibited both pressor responses induced by McN-A-343 and DMPP. These results suggest that not only nicotinic receptors but also $M_1$ receptors play a facilitatory role in ganglionic transmission but $M_2$ receptors do not contribute the transmission in spinal (pithed) rabbits.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.12
• /
• pp.2263-2273
• /
• 2000

Catalytic wet air oxidation of acetic acid over Mn-Ce based catalysts deposited on various supports ($SiO_2$, $TiO_2$, $ZrO_2$), $ZrSiO_4$, $ZrO_2(10wt%)/TiO_2$) have been carried out in high pressure microreactors. Also, promotional effects by small addition(O.5~1.0 wt%) of p-type semiconductors (CoO, $Ag_2O$, SnO) have been investigated. From the screening tests for initial activity ranking, both Mn(2.8)-Ce(7.2 wt%) and Ru(O.4)Mn(2.7)-Ce(6.9 wt%) supported on $TiO_2$ were selected as the promising reference candidates. In $Mn-Ce/TiO_2$ reference catalyst, addition of small amount of each p-type semiconductor (Co, Sn and Ag) resulted in activity promotional effect and the degree of the increase was in the following order: Co> Ag > Sn. Especially, $Mn-Ce/TiO_2$ promoted with 0.5 wt% Co gave the 2.6 folds activity increase compared to the reference case attributing to the surface area increase as well as synergy effect. In $Ru-Mn-Ce/TiO_2$ reference catalyst, only Co(1.0 wt%) promoted case showed a little reaction rate increase.

• The Korean Journal of Pharmacology
• /
• v.30 no.3
• /
• pp.321-330
• /
• 1994

The protective effect of 'ischemic preconditioning (PC)' on ischemia-reperfusion injury of heart has been reported in various animal species, but without known mechanisms in detail. In an attempt to investigate the cardioprotective mechanism of PC, we examined the effects of PC on the myocardial oxidative injuries and the oxygen free radical production in the ischemia-reperfusion model of isolated Langendorff preparations of rat hearts. PC was performed with three episodes of 5 min ischemia and 5 min reperfusion before the induction of prolonged ischemia (30 min)-reperfusion(20 min). PC prevented the depression of cardiac function (left ventricular pressure x heart rate) observed in the ischemic-reperfused heart, and reduced the release of lactate dehydrogenase during the reperfusion period. On electron microscopic pictures, myocardial ultrastructures were relatively well preserved in PC hearts as compared with non-PC ischemic-reperfused hearts. In PC hearts, lipid peroxidation of myocardial tissue as estimated from malondialdehyde production was markedly reduced. PC did not affect the activity of xanthine oxidase which is a major source of oxygen radicals in the ischemic rat hearts, but the myocardial content of hypoxanthine (a substrate for xanthine oxidase) was much lower in PC hearts. It is suggested from these results that PC brings about significant myocardial protection in ischemic-reperfused heart and this effect may be related to the suppression of oxygen free radical reactions.

• Proceedings of the KOSOMBE Conference
• /
• v.1992 no.05
• /
• pp.27-47
• /
• 1992

Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

• Resources Recycling
• /
• v.12 no.6
• /
• pp.38-46
• /
• 2003

In this study, nano-sized Ni-ferrite and $Fe_2$$O_3$＋NiO powder was fabricated by spray pyrolysis process in the condition of 1kg/$\textrm{cm}^2$ air pressure using the Fe-Ni complex waste acid solution generated during the manufacturing process of shadow mask. The average particle size of the produced powder was below 100 nm. The effects of the reaction temperature, the concentration of raw material solution and the nozzle tip size on the properties of powder were studied. As the reaction temperature increased from $800 ^{\circ}C$ to $1100^{\circ}C$, the average particle size of the powder increased from 40 nm to 100 nm, the structure of the powder gradually became solid, yet the distribution of the particle size appeared more irregular. Along with the increase of the reaction temperature, the fraction of the Ni-ferrite phase were also on the rise, and the surface area of the powder was greatly reduced. As the concentration of Fe in solution increased from 20g/l to 200g/l, the average particle size of the powder gradually increased from 30 nm to 60 nm, while the distribution of the particle size appeared more irregular. Along with the increase of the concentration of solution, tie fraction of the Ni-ferrite phase was on the rise, and the surface area of the powder was greatly reduced. Along with the increase of the nozzle tip size, the distribution of the particle size appeared more irregular, yet the average particle size of the powder showed no significant change. As the nozzle tip size increased from 1 mm to 2 mm, the fraction of the Ni-ferrite phase showed no significant change, while the surface area of the powder slightly reduced. As the nozzle tip size increased to 3 mm and 5 mm, the fraction of the Ni-ferrite phase gradually reduced, and the surface area of the powder slightly increased.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.11 no.1
• /
• pp.27-41
• /
• 2000

Objects：This study was designed for studying of current Korean adolescents computer game playing habits and exploring associations with parental rearing patterns and individual psychopathology. Methods：One hundred twenty four adolescents(age 13-15) who reside in urban area completed self-report questionnaires containing Questionnaires designed by authors, Symptom Checklist-90-Revision of Korean Version(SCL-90-R) and Parental Bonding Instrument(PBI). Results：1) Computer game playing appears to be one of the social and leisure phenomena in these days. Although Adolescents spend a lot of times on computer game, Many of them perceive not problematic. 2) Compared with females, Male play computer games more regularly, more longer, spent more times in gamebang. 3) There was positive relationship between anxiety subscale in SCL-90-R and detrimental effects of computer game. 4) There was positive relationship between game frequency and maternal overprotection. 5) The main reasons for playing are 'for an avoidance of stressful life events', academic burden was the most troublesome issues in korean adolescents. 6) Many adolescents use gamebang as a social place, but they thought that gamebang is not good places to have a good time. Conclusion：This papers shows that computer game playing is a popular social leisure activity in Korean adolescents. And, Most of korean adolescents reported that they are suffered from pressure of academic achievements. They use computer game mainly by means of relieving academic pressures. In a heavy game users who have many conflicts with parents, teacher and who has frequent truancy and social withdrawal show significant anxiety. Maternal overprotection was observed in heavy game users. Authors recommended that clinicians should be careful in examining heavy computer game behaviors. Both underlying affective states and environmental influences, including family situations should be vicariously examined.

• KDI Journal of Economic Policy
• /
• v.13 no.2
• /
• pp.3-19
• /
• 1991

This paper attempts to identify key determinants of long run movements of real M2 by using the Johansen procedure for estimating and testing cointegration relations. It turns out that the real M2 equation has been stable over the long run despite rapid changes in financial structure since 1975. Moreover, the real M2 equation can be reduced to a velocity equation with the opportunity cost variable, expected inflation less the weighted average rate paid on M2 deposits, being the key determinant. However, it does not work to use a market interest rate such as the yield on corporate bonds in place of expected inflation for calculation of the opportunity cost. In the U.S., a market interest rate can be used, but not in Korea. Presumably, two somewhat different reasonings can be used to explain this result. One is that the yield on corporate bonds may not adequately reflect the inflationary expectations due to regulations on movements in interest rates. The other is that M2 deposits are not readily substitutable with such assets as corporate bonds because of market segmentations, regulations, and so on. From the policymaker's point of view, this implies that the inflation rate is an important indicator of a policy response. On the other hand, policymakers do not regard movements of the yield on corporate bonds as an important policy indicator. Altogether, the role of interest rates has been quite limited in Korea because of incomplete interest rate liberalization, an underdeveloped financial system, implementation procedures of policy measures, and so on. The result that M2 velocity has a positive cointegration relation with expected inflation minus the average rate on M2 implies that frequent adjustments of the regulated rates on M2 will be necessary as market conditions change. As the expected inflation gets higher, M2 velocity will eventually increase, given that the rates on M2 do not change. This will cause higher inflation. If interest rates are liberalized, then increases in market interest rates will result in lagged increases in deposits rates on M2. However, in Korea a substantial portion of deposit rates are regulated and will not change without the authority's initiatives. A tight monetary policy will cause increases in a few market interest rates. But the market mechanism, upward pressure for interest rate adjustments, never reaches regulated deposit rates. Hence the overall effects of tight monetary policy diminish considerably, only causing distortions in the flow of funds. Therefore, frequent adjustments of deposit rates are necessary as market conditions such as inflationary expectations change. Then it becomes important for the policymaker to actively engage in adjusting regulated deposit rates, because the financial sector in Korea is not fully developed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.32-44
• /
• 2001

The purpose of this study was to investigate the effects of Er : YAG laser on cutting efficacy and temperature changes of dentin. We used the dentin specimens of human premolars and molars which contain the physiologic saline and maintain the pulpal pressure in dentinal tubules. Each specimen was exposed to Er : YAG laser with non-contact handpiece type delivery system under different treatment condition of irradiation energy, pulse repetition rate, and exposure time. Two procedures were conducted by the presence of water flow during lasing. The specimens were grouped by thickness of dentin. We investigated the cavity pattern, volume, and temperature change of dentin specimen to determine the cutting efficacy and temperature rise of Er : YAG laser, and obtained following results. 1. Cutting volume of dentin was increased by increasing the irradiation energy, pulse repetition rate, and exposure time(P<0.05). 2. Margins of abulated cavities were sharp and clean and floors of cavities were conical in shape and showing smooth surfaces. Upper diameter of abulated cavities were increasing as laser parameter of irradiation energy, pulse repetition rate, and exposure time were increased. A few cracks were observed on abulated surfaces under treatment condition of laser parameter with 150mJ, 5Hz, and 5sec. 3. Temperature was increased as laser parameter of irradiation energy, pulse repetition rate, and exposure time were increased, and temperature rise was decreased as dentin thickness was increased(P<0.05). 4. Temperature rise was decreased under water flow compared with no water flow during laser exposure(P<0.05). From these results, we think that the method of using a Er:YAG laser would be effective and safe in cutting dentin for clinical application.