• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.659-662
• /
• 2002

The present paper presents the experimental results for pressure drop in inclined tube bundles located in a rectangular duct. Measurements are made for pressure drop in triangular and rotated triangular tube arrays having P/d ratio of 1.6 and inclination angles of 30,45,60 and 90 degrees. The Reynolds number based on the free stream velocity and tube diameter ranges from $8{\times}10^2\;to\;6.3{\times}10^{4}$. The experimental results show that the magnitude of dimensionless pressure drop decreases significantly when the inclined angle is less than 45 degree. The measured data are compared with two existing correlations available in the literatures. The ESDU correlation agrees well with the present data far the triangular arrays. But some discrepancies are observed for the rotated triangular arrays when the inclined angles are 30 and 45 degrees. The Idel'chik correlation generally agrees well with the measured data for the rotated triangular arrays except for the inclined angle of 30 degree. The Idel'chik correlation needs modification for the triangular arrays. The modified Idel'chik correlation agrees well with the measured data within $10{\%}$. It is found that the present measured data can be applied to the evaluation and modification of previous correlations.

• 화약ㆍ발파
• /
• 제18권2호
• /
• pp.14-22
• /
• 2000

발파소음을 계측하여 예측방법의 타당성을 검토하였고, 환경규제 기준으로의 변환방식을 규명하였다. 환산거리에 따른 발파소음의 예측은 환산거리와 음압레벨의 상관성이 더 좋았으나, 상관계수가 낮아서 환산거리 설계 의한 발파소음의 조절은 어려움이 있었다. 발파시 동시에 측정된 음압레벨과 소음레벨의 상관식에 의한 변환과, 음압레벨의 우세주파수에 해당하는 청감보정회로의 보정치만큼 간이 보정하여 변환하는 방법과, 퓨리에 변환을 하여 청감보정한 후 소음레벨을 구하는 방법을 시도하였다. 세 가지 방법 모두 변환하는 데에는 많은 오차가 발생하였으나 우세주파수, FFT를 이용한 변환보다는 발파시 동시에 측정된 음압레벨과 소음레벨의 상관식에 의한 변환 방법이 가장 실용적인 방법이었다.

• 대한기계학회논문집
• /
• 제18권12호
• /
• pp.3377-3385
• /
• 1994

This paper introduces empirical correlations to obtain the gas/liquid flow rates and the spray drop size of low viscosity liquid injected by Y-jet twin-fluid atomizers. The gas flow rate is well correlated with the gas injection pressure and the mixing point pressure, based on the compressible flow theory. Similarly, the liquid flow rate is determined by the liquid injection pressure and the mixing point pressure, and a simple correlation for the liquid discharge coefficient at the liquid port was deduced from the experimental results. The mixing point pressure, which is one of the essential parameters, was expressed in terms of the gas/liquid flow rate ratio and the mixing port length. Disintegration and atomization mechanisms both within the mixing port and outside the atomizer were carefully re-examined, and a "basic" correlation form representing the mean diameter of drops was proposed. The "basic" correlation was expressed in terms of the mean gas density within the mixing port, gas/liquid mass flow rate ratio and the Weber number. Though the correlation is somewhat complicated, it represents the experimental data within an accuracy of ${\pm}15%$.EX>${\pm}15%$.

• Structural Engineering and Mechanics
• /
• 제87권5호
• /
• pp.419-429
• /
• 2023

This study conducts numerical analyses of a thin-walled composite cylinder under axial compression and internal pressure of 10 kPa. Numerical vibration correlation technique and nonlinear postbuckling analyses are conducted using the nonlinear finite element analysis program, ABAQUS. The single perturbation load approach and measured imperfection data are used to represent the geometric initial imperfection of thin-walled composite cylinder. The buckling knockdown factors are derived using present initial imperfection and analysis methods under axial compression without and with the internal pressure. Furthermore, the buckling knockdown factors are compared with the buckling test and computation time are calculated. In this study, derived buckling knockdown factors in present study have difference within 10% as compared with the buckling test. It is shown that nonlinear postbuckling analysis can derive relatively accurate buckling knockdown factor of present thin-walled cylinders, however, numerical vibration correlation technique derives reasonable buckling knockdown factors compared with buckling test. Therefore, this study shows that numerical vibration correlation technique can also be considered as an effective numerical method with 21~91% reduced computation time than nonlinear postbuckling analysis for the derivation of buckling knockdown factors of present composite cylinders.

• 대한의생명과학회지
• /
• 제26권1호
• /
• pp.28-36
• /
• 2020

High blood pressure (HTN) is a condition in which blood pressure is kept higher than normal. Blood pressure trait measures systolic blood pressure (SBP) which is the highest pressure and diastolic blood pressure (DBP) which is the lowest blood pressure. Pulse pressure (PP) is the difference between systolic and diastolic blood pressure. Hypertension is known as a disease caused by the interaction of the environment and genetic factors. To date, studies have been conducted to find genes associated with hypertension. Genome-Wide Association Study (GWAS) analysis using European data from the UK Biobank reported new 535 loci were associated with blood pressure trait. Among them, 12 genes have been reported to have a significant correlation with SBP, DBP and PP. In the study, 12 genes polymorphisms were extracted based on KARE (Korean association resource) and then we performed linear regression of blood pressure trait. As a result, 6 SNPs of the 3 genes (rs12355413 and rs11006736 of ARMC4, rs2290883, rs2290884 and rs11039014 of LRP4, rs7234941 of BCL2) showed statistically significant correlation (P<0.05) with blood pressure trait. Of the 3 genes, 6 SNPs in 2 genes (rs9651357, rs12355413, rs11006736, rs1889522 of ARMC4 and rs4987774, rs7234941 of BCL2) showed significant correlation with hypertension. These results suggest that genetic polymorphisms of ARMC4, LRP4 and BCL2 genes are associated with blood pressure traits and hypertension in Korean population. Moreover, we expected to help understand the pathogenesis of hypertension.

• Journal of Mechanical Science and Technology
• /
• 제14권1호
• /
• pp.93-102
• /
• 2000

The objective of the present study is to investigate the pressure-strain correlation terms of the Reynolds stress models for the three dimensional turbulent boundary layer in a $30^{\circ}$ bend tunnel. The numerical results obtained by models of Launder, Reece and Rodi (LRR) , Fu and Speziale, Sarkar and Gatski (SSG) for the pressure-strain correlation terms are compared against experimental data and the calculated results from the standard k-${\varepsilon}$ model. The governing equations are discretized by the finite volume method and SIMPLE algorithm is used to calculate the pressure field. The results show that the models of LRR and SSG predict the anisotropy of turbulent structure better than the standard k-${\varepsilon}$ model. Also, the results obtained from the LRR and SSG models are in better agreement with the experimental data than those of the Fu and standard k-${\varepsilon}$ models with regard to turbulent normal stresses. Nevertheless, LRR and SSG models do not effectively predict pressure-strain redistribution terms in the inner layer because the pressure-strain terms are based on the locally homogeneous approximation. Therefore, to give better predictions of the pressure-strain terms, non-local effects should be considered.

• 가정과삶의질연구
• /
• 제24권5호
• /
• pp.161-174
• /
• 2006

This study examined different individual and parental factors that affect children's achievement motivation. For an analysis, perceived competence, intrinsic locus of control were included in individual variables. For parental variables, parental support and achievement pressure and marital conflict were examined. The sample consisted of 561 fifth and sixth grade children. Statistics and methods used for the data analysis were Cronbach's alpha, Factor analysis, frequency, percentage, Pearson's correlation, and Hierarchical Regression. Several major results were found from the analysis. First, girl's achievement motivation was higher than boys. No age difference was found between fifth and sixth grade. Second, boy's and girl's achievement motivation had a positive correlation with perceived competence, intrinsic locus of control, parental support and achievement pressure but a negative correlation with parental marital conflict. Third, important variables predicting boy's and girl's achievement motivation were perceived academic competence, parental achievement pressure and perceived social competence. Important variables predicting boy's individual and social oriented achievement motivation were perceived academic competence and parental achievement pressure. On the other hand, important variables predicting girl's individual oriented achievement motivation were perceived social competence, perceived academic competence, intrinsic locus of control and parental achievement pressure. Important variables predicting girl's social oriented achievement motivation were parental achievement pressure, perceived academic competence and mother's support.

• 척추신경추나의학회지
• /
• 제2권1호
• /
• pp.115-125
• /
• 2007

Objectives : The limited number of studies to date have mainly focused on the effect of obesity on the characteristics of plantar foot pressures. This study is designed to find the correlation between plantar pressure and obese index. Methods : This study assessed the body composition of 30 obese women using bioelectrical impidence analysis and Gaitview AFA-50. The static and dynamic plantar pressure was determined from electronic footprints captured using a capacitive pressure distribution platform during standing and walking. The data were analysed by independent t-test and Pearson Correlation. Results : Positive correlations were noted between body weight, body mass index(BMI), waist circumference(WC), waist-hip ratio(WHR) and difference of fore and rear plantar pressure. And negative correlations were noted between body weight, BMI, WC, WHR and difference of left and right plantar pressure. Conclusions : The findings of this pilot study suggest that body composition influences the waight distribution in overweight and obese subjects.

• 동력기계공학회지
• /
• 제20권6호
• /
• pp.34-39
• /
• 2016

This paper is the numerical study on the correlation of leakage by the variation of inlet pressure and clearance in hydrostatic bearing. The main goal of this study is to apply to the design of hydro system the results that the pocket pressure and the leakage rate according to the inlet pressure and the clearance between piston and cylinder tube. Because the hydrostatic bearing in hydraulic cylinder has the narrow rectangular channel between piston and cylinder tube, so to verify the numerical scheme, it has been compared with the experimental results of Brackbill and Kandlikar. The pressure data of numerical results inside narrow rectangular channel correlate was showed a good agreement with experimental results, thereby the numerical scheme was applied to the real model that is a hydraulic cylinder with the hydrostatic bearing. In conclusion, the pressure differences between inlet and pocket were shown within 3%. Leakage rates were showed rapidly increased pattern between about 4.5 and 6.7 times because the section area to calculate the leakage rates were proportioned to a square of diameter. The correlation equation was calculated among the inlet pressure, the clearance and the leakage rate by using the linear regression.

• 대한기계학회논문집B
• /
• 제23권7호
• /
• pp.881-892
• /
• 1999

Experiment was performed to study the characteristics of pressure drop of multi-channel tubes for automotive condenser using HFC-134a. Single phase liquid and two phase flow pressure drop were measured in one rectangular plain and three micro-fin tubes with 10 channels. Data are presented for the following range of variables: mass flux(200 to $600kg/m^2s$), and inlet saturation pressure of the refrigerant(1.0 and 1.6MPa). For subcooled flow, pressure drops are 10% and 12% higher than that predicted by the Petukhov equation with hydraulic diameter respectively. Two-phase flow pressure drop are compared with the previously proposed correlations, and well predicted by modified correlation that was derived from Traviss correlation. and correlated within -30~+20%. Also experimental data are correlated within -56%~+18% by Webb's prediction method based on the equivalent mass velocity concept originally proposed by Akers et al.